Why does the drum washing machine always stay at one time?

There are several main reasons why the washing machine does not go away:

1. If the motor does not rotate, the motor does not rotate, which will definitely affect the drainage and will also lead to abnormal dehydration.

2. The timer is broken and abnormal, resulting in the inability to drain water.

3. Computer programs.

You can try whether the reboot will recover after a complete power failure.

4. Circuit failure, such as the circuit or electromagnet that controls the drain switch.

There is a problem that causes the drain switch to open for a long time.

5. Mechanical failure, for example, something is stuck in the position where the drain switch should be turned off, resulting in the switch not being turned off.

6. The spring in the drain valve is too long or loses its elasticity. Just replace the inner spring.

7. If there is debris blockage in the drain valve or the drain hose is bent and deformed, at this time, unscrew the valve cover of the drain valve first and take out the debris.

This is a normal setting situation, the drum washing machine always stays in one place does not move, it means that it is soaking, that is, the soaking time is shortened, so that the drum washing machine can be used normally. In the dead of night, I always want to find a tranquility, find a space to be alone, and then let my thoughts drift with the wind, and escape for a while in the tranquility of cranky thoughts. When the soul can't bear the load of life, it can only send a signal to the sky that it is tired, too tired, and this feeling of tiredness is not something that ordinary people can imagine.

Every day I want to find peace in my soul, however, it is really difficult.

There is nothing in the world, and mediocrity disturbs itself. Maybe I'm just a philistine. Why look for tranquility in anything?

In fact, I want to hope for peace, in this extraordinary and bad day this year. I reflected and reflected. Most of the time I don't understand what I'm doing.

Kind of life. Kind of always tugging at people's minds on certain days. When it comes to the tranquility of seeking, everyone expects to have this moment.

For me, it may feel a little heavier in moments of solitude, but it's not absolute. Sometimes, although people are in a noisy and noisy environment, but the heart has already flown to the realm of not knowing what kind of, I often smile on my face, and I have seen through all the complicated things in my inner constancy. People sometimes pretend to be a master of the world, but in fact, it is not the case, and the appearance of all this is also due to countless times of crawling, and then the end of reflection.

There is no real excitement of benefits, no real heartfelt reverence for life and nature, no gratitude and appreciation for life and the world, no kind and transparent understanding, no kind and susceptible heart, no final awakening, and no natural tranquility and detachment. In many cases, the motivation to seek tranquility is far greater than the force caused by all external things, and it may also be a process of excellence in the pursuit of tranquility for each individual. Why is that?

I asked myself with a smile. For a person who is truly integrated into life, will sigh at the wonder of the creation of the world. The heartfelt reverence and concern for life and nature is a kind of sincere gratitude and admiration.

The Wendong washing machine always stays in one time and does not move. It proves that the motherboard circuit of the washing machine is faulty.

You need to call the washing machine after-sales service** for repair.

This may have a certain problem, it is recommended that you go to the after-sales service and let them deal with it for you.

It may be that there is not enough water in it or that there is a problem with the washing machine.

When the drum washing machine is washing clothes, the time will not stop and will enter the countdown mode, which may still be a problem when setting.

Most likely, the control panel is malfunctioning. It feels very much like a control panel bug in the program.

Is there a glitch inside? Drum washing machines, everything else is good, but when there is a problem, it is not as convenient to repair as ordinary washing machines.

You can see if something is stuck, and if not, then it's a problem with the software design, and generally nothing too big.

This should have something to do with your washing machine settings. You're resetting the mode of your washing machine.

There is a problem with the motherboard of the washing machine. The chip fails to read the data, or the data is not fully read. The only way to do this is to replace it with a new motherboard.

It is also possible to buy a motherboard of the same model directly from the network**, but it is required. Rich maintenance experience and professional theoretical basis.

Washing machines have spread all over our thousands of households, each family will have a washing machine, and the frequency of use of washing machines is also very high, basically every day or three to five days will wash clothes, so the probability of washing machine failure is also very high, including drum washing machines.

**E39, Dirt sensor failure. This fault** is basically a problem with the motherboard or the sensor, which is a dirt sensor. The purpose of this sensor is to detect the cleanliness of the water.

This sensor is only found in high-end washing machines.

First of all, check whether the motherboard has a voltage transmission to the five turbidity sensor, the normal voltage of this sensor is 5V, if the motherboard effectively sensor output voltage, then it is a problem with the sensor. If there is no voltage, it means that it is a problem with the motherboard, and we only need to repair or replace the problem part.

**E40, EEPROM verification error. This ** stands for erasable storage such as the Grip.

The check code is incorrect, to put it bluntly, the memory is damaged, such a failure can only be re-written to the program, ah, we personally do not have such a device, only to be able to replace a motherboard.

**E41, EEPROM communication error. The faults represented by this ** are erasable memory reading errors and receiving signal sending errors, and motherboard damage can only be done by replacing the motherboard.

**E60, the motor does not rotate when starting. This ** is displayed when the washing program starts after the washing machine has been flooded. Because the motor only rotates when washing, it does not operate when water is ingress.

Such a phenomenon should be a problem with the motherboard of your drum washing machine. If there is a problem with the motherboard, the display board will have this situation where the time does not change. You can directly call the official customer service to report for repair, and let the professional master solve the problem.

The following are the reasons why the washing time does not change when washing clothes in a fully automatic drum washing machine.

First of all, check whether the timing switch is abnormal, and whether the timing line is normal.

What does it mean that the rest of the time of the fully automatic washing machine does not move.

The main aspects are as follows.

1) The washing machine panel door is not closed well or the switch of the top cover is damaged, it may also be that the switch is in poor contact, the washing machine is not allowed to open the top cover because it is a high-speed action when dehydrating, so there is a linkage switch on the top cover, and the cover circuit will be automatically disconnected as soon as the cover circuit is opened. If it is damaged, it will not move.

2) The drainage system of the washing machine is blocked or the drain valve is broken, the washing liquid in the water cylinder cannot be discharged, or there is too much foam in the water cylinder, the washing liquid in the cylinder is difficult to drain for a while, the water level switch cannot be reset, and the washing machine cannot enter the dehydration program.

3) The drain valve does not open the clutch conversion, and the washing and dewatering of the automatic washing machine are completed by the gear at the bottom of the solenoid valve conversion, and the damage of the solenoid valve will also make the dehydration unable to operate normally.

4) Poor motor performance and capacitance problems, resulting in insufficient output power, can be solved by replacing the capacitor.

5) Computer CMOS? rom?The curing program is damaged and cannot enter the dehydration process. In this case, this can replace the panel.

6) The fastening screws of the inner barrel of the washing machine are loose, or the bottom bracket of the inner barrel of the washing machine is damaged. If this is the case, in most cases, an empty washing machine can be dehydrated.

7) The washing and dewatering of the fully automatic washing machine is completed by the gear at the bottom of the conversion of the solenoid valve, and the damage of the solenoid valve will also make the dehydration unable to operate normally.

Dear, the time of the washing machine will generally be adjusted accordingly according to the function, mode or water level you set, see if you have always set the same mode?

Summary. Hello, dear, time does not move, there may be the following reasons: it may be 1, the motor does not rotate, the motor does not rotate will definitely affect the drainage, and it will also lead to dehydration abnormality, 2, it may also be that the timer is broken, there is an abnormality, resulting in the failure to drain, 3, or the computer program is abnormal, you can try whether the reboot will be restored after a complete power failure, 4, circuit failure, such as the circuit controlling the drain switch or the electromagnet has a problem, resulting in the drain switch long open, 5, mechanical failure, such as, There is something stuck in the position where the drain switch should be turned off, causing the switch to not be turned off, 6, the spring in the drain valve is too long or loses its elasticity.

As long as the inner spring can be replaced, 7, there are debris blockage in the drain valve or the drain hose is bent and deformed, at this time, unscrew the drain valve cover first, and take out the debris. Let's see what caused you!

Hello, I have seen your question and am sorting out the answer, please wait for a while Hello, dear, time does not move, there may be the following reasons: it may be 1, the motor does not rotate, the motor does not rotate will definitely affect the drainage, and it will also lead to dehydration abnormality, 2, it may also be that the timer is broken, there is an abnormality, resulting in no drainage, 3, or it is an abnormality of the computer program, you can try whether the reboot will be restored after a complete power failure, 4, circuit failure, For example, there is a problem with the circuit or electromagnet that controls the drain switch, which causes the drain switch to open for a long time, 5, mechanical failure, for example, something is stuck in the position where the drain switch should be turned off, resulting in the switch not being able to turn off, 6, the spring in the drain valve is too long or loses its elasticity. As long as the inner spring can be replaced, 7, there are debris blockage in the drain valve or the drain hose is bent and deformed, at this time, unscrew the drain valve cover first, and take out the debris.

Let's see what caused you!

Why does the drum washing machine always stay at one time? The washing machine stopped for 4 seconds and didn't move, what's going on.

Hello, I am glad to serve you and give you the following answer: the drum washing machine stays for a time, probably due to the failure of the control system inside the washing machine, resulting in the washing machine not functioning normally. It can also be due to a faulty circuit board inside the washing machine, which prevents the washing machine from functioning properly.

In addition, the controller inside the washing machine may malfunction, or it may be caused by the failure of the controller coded inside the washing machine, resulting in the failure of the washing machine to operate normally. Finally, the motor inside the washing machine may malfunction, or it may be due to a malfunction of the motor inside the washing machine, which causes the washing machine to not function properly. In conclusion, if the washing machine stays motionless for a certain period of time, it may be due to a malfunction of the control system, circuit board, controller, or motor inside the washing machine, which causes the washing machine to not function properly.

Therefore, if the washing machine stays still for a certain amount of time, it is recommended that you contact a professional maintenance personnel in time for inspection and repair to ensure that the washing machine can operate normally.