What is the fault of Galanz drum washing machine E04

It should be that the control panel is broken, you can call the after-sales consultation.

Look for after-sales maintenance or read the manual.

You can ask after sales, and it is best to find a professional to solve it.

The failure of the water inlet system of the washing machine is generally divided into water inlet and non-water inlet failure.

Fault phenomenon: The washing machine does not stop flooding.

Causes & Solutions:

1. Rust occurs in the inlet valve, resulting in spring breakage, stagnation of the valve core or foreign matter, so that the inlet valve is not closed tightly. Replace or repair the inlet valve directly.

2. Check whether the drain valve is leaking so that the water does not stop, and repair the drain valve.

3. The breakdown damage of the bidirectional thyristor used for the control circuit of the inlet valve makes the inlet valve out of control. Replace with a new triac.

4. The hose transmission sensor of the hydraulic system fails, and the air leaks or the joint falls off. Reinstall the hose and make sure the connection is secure.

Fault phenomenon: The washing machine cannot enter the water.

Causes and solutions: Check the water supply for abnormalities first, and then do the following checks on the washing machine.

1. The filter screen of the inlet valve is blocked by debris. Just clear the filter.

2. The triacs of the inlet valve are damaged and need to be replaced.

3. The continuous loosening of the inlet valve needs to be reconnected.

4. Check whether the power socket, power cord or fuse are in good condition, and ensure that the power supply line has good contact.

5. Use the resistance file of the multimeter to detect the solenoid valve of the water inlet valve to see if it is damaged. If the test resistance value is not around ohms, it may be an open circuit damage and the corresponding part needs to be replaced.

6. The drive transistor of the triac controlling the water inlet valve is damaged. The transistor needs to be replaced.

Summary. E05 is a water inlet timeout fault, causes and solutions:

1. The inlet valve is broken, replace the inlet valve.

2. The inlet water pipe is blocked, clean the inlet water pipe.

3. The water is cut off.

4. If the water pressure is not enough, check the water source.

5. The water level switch is broken, replace the water level switch.

What is the fault of Galanz drum washing machine showing E05?

E05 is a tung water inlet type overtime fault, causes and solutions: 1, the water inlet valve is broken, replace the water inlet valve. 2. The inlet water pipe is blocked, and the inlet water pipe is cleaned and polished.

3. The water is cut off. 4. The water pressure is not enough, check the water source blindly. 5. The water level switch is broken, replace the water level switch.

The water inlet valve has been changed, the water level switch has also been changed, and it still shows e05 What is the reason for this.

Try it back on.

Adjust to a single spin shake to show E05

Is it that the brushes on the motor are broken.

1. You can unscrew the water inlet pipe joint connected to the washing machine, see if the water inlet on the washing machine is blocked by dirt, and clean it up to see if this problem is solved; If it still can't be solved, you can only find after-sales maintenance personnel; 2. It is recommended that the hall car user choose the hot and cold water inlet program, and then enter the hot water for 30 seconds before washing the water intake, so as to ensure that the water temperature in the barrel of the wave wheel washing machine does not exceed 50 degrees. It is best not to choose the hot water program, as only hot water during washing may cause the water temperature in the barrel to exceed 50 degrees Celsius, causing damage to the machine.

Check whether the adjusting rod nut on the drain valve is loose, and the guide can not open the drain valve core caused by the side traction, at this time fix the nut, so that it can pull the drain valve core, or it may be that the computer board has been damaged or broken, the computer board should be replaced, the nut is not loose or the cable is not loose, the fiber rubber may be damaged and the drain valve core cannot be opened, and the tractor should be replaced at this time.

Galanz washing machine shows "E04" because the water inlet is timed out, and the washing machine does not enter the water for more than 8-15 minutes, or the water enters slowly. The workaround is as follows:

1. First of all, check whether there is a water outage at home, and you can open other faucets at home to check.

2. Then check whether the faucet of the washing machine is turned on, if not, just turn on the faucet and then restart the washing machine.

3. If it is not the faucet, you can check whether the water pressure is too small, if the water pressure is too small, it is recommended to wait for the water pressure to stabilize before restarting the washing machine.

4. If it is not a problem of water pressure, you can unscrew the water inlet pipe of the washing machine and check whether the filter screen of the water inlet valve is blocked by debris.

5. If the water inlet pipe is blocked, you can use a small brush, such as a toothbrush, to clean the filter screen of the water inlet or pipe valve port. Galanz washing machines can operate normally.

The failure of the washing machine 04** means that the door switch is faulty, and the reason for this problem is:

1. Check whether the switch next to the door is broken or something is stuck. The way to deal with this situation is: if the switch is broken, replace the switch in time; If something gets stuck next to the door, clean up the foreign object.

2. Check whether the internal sensor of the door lock switch is damaged. The way to deal with this situation is: if the internal sensor of the door lock switch is broken, you can build a new one.

Extended information: The washing machine looks very clean, but you don't know that there is an outer sleeve on the outside of the washing tube when washing, and the laundry water is in and out of the middle of these two layers, and the water is discharged in this mezzanine.

The washing machine interlayer is actually like a sewer, its dirt is mainly composed of scale, laundry detergent free matter, fibers, organic matter, dust, bacteria and other garbage, these hodgepodge are firmly attached to the washing machine interlayer, multiply and ferment at room temperature, and the laundry will pollute the clothes to the human body, and even make people itch and allergies. When cleaning, pour the amount of water descaler (commercially available) for the three kettles into an empty container, prepare it according to the ratio of descaler water = l 2 and stir well.

Pour the mixed descaler solution from the detergent addition box, being careful not to spill on the **. Then press the power switch of the washing machine and set the program to"Laundry program"(time selection is the longest) to rotate the washing cone; After the descaling solution is discharged from the drain pipe into the barrel, the discharged descaling liquid is added from the detergent addition box, and so on many times until the program is finished, and the filter is opened to clean the filter.

When the machine is finished, open the inlet valve and return the drain pipe to its original position. Re-select the washing program to make the washing machine run again, and when the program is finished, clean the filter again. At this point, the descaling and cleaning are complete.

However, due to the action of descaling liquid, the surface of the washing machine drum will be slightly dark and black, but it will not affect the normal use, and the clothes can be restored to their original state after washing the clothes a few times.

One of the easiest and most effective ways to prevent mold is to leave the washing machine covered after washing. The washing machine should be protected against fungal spores:

The number of fungal spores in a fully automatic washing machine is more than in a semi-automatic washing machine. Therefore, after washing clothes, you should empty the water in the washing machine in time, and open the lid to use a disinfection cabinet or clothing disinfectant if possible; Underwear is best washed by hand.

E4: When the water inlet is overtime, check the water pressure and whether the water inlet valve is dirty and blocked. Galanz washing machine failure** is as follows, according to the fault** to determine the washing machine failure:

e0: The lid was opened during the appointment process, and this ** needs to be opened and closed again.

E1: When the drainage is overtimed, check whether the drainage pipe is blocked.

E2: The upper cover is not properly covered, and the upper cover needs to be covered.

E3: Unbalanced dehydration, shake the clothes back up and dehydrate again.

E4: When the water inlet is overtime, check the water pressure and whether the water inlet valve is dirty and blocked.

E5: If the water temperature exceeds 50 degrees, please put cold water to lower the water temperature.

E6: Whether you use high-foaming laundry detergent.

E7: If it is an environmental protection dual power display, E7 is due to the ambient temperature is too low.

e8: The voltage is too low.

e9: The voltage is too high.

How can the fault of E04 be solved.

Summary. Hello dear, <>

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

What is the fault of Galanz drum washing machine showing E05?

Galanz drum washing machine E05 is a washing motor failure, most of the speed signal is abnormal (at the end of the motor shaft), measuring two white thin wires 56-70 ohm for Zhiling sleepy normal, abnormal report E05In addition, there are new motors that come out of the after-sales service, and there are also bad ones, so you should pay attention.

Hello dear, <>

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your wide concession and praise, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am still satisfied with my answer, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Hello dear and happy to answer your <>

The fault of the Galanz drum washing machine shows the E05 as follows: 1The inlet valve is broken, replace the inlet valve. 2.

The inlet water pipe is clogged, clean the inlet water pipe. 3.The water is cut off.

4.The water pressure is not enough, check the source of the water crack, Galanz drum washing machine has a high degree of cleanliness, and the wear and tear of Jingzheng on the clothes is very small; Galanz drum washing machine is to achieve the effect of washing by rotating the drum, so it does not need a lot of water to wash and can save water; I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Happy life, everything goes well [warm] [warm].