Leike router, how to set a password is to prevent others from rubbing the network .

1. First of all, enter the login page of Leike router, the default is that of course you can also modify it to improve security).

2. Then enter the default account name and password guest After logging in successfully, find the wireless security configuration under the wireless configuration, and set the 8-digit password The more complex the more secure, it is best to use a combination of letters and numbers.

3. Then save, restart your router and then enter the password you just set to log in to wifi, others don't know the password can't get in.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

Rubbing the network really happens when the wireless router turns on the wireless function, and you go into the router to set up the route.

1. Connect to the computer with a network cable, and connect the other end to the PC port of the router (PC1 PC4 any port is OK):

3 This is the IP logged in the background of the router, which can also be seen from the back of the router, if it has not changed;

4 Then, open the browser, enter the IP of the default gateway obtained above, which is ", and press the enter key to confirm:

Enter a normal username and password. The default username and password are generally admin, as shown in the figure above;

After successfully logging in, you will first enter the system information page, and after opening the interface, you will see the status page under the system information. Here we can find the WAN, LAN, Wireless, and Routing Status:

After entering, we usually check and turn on the DHCP service first. Click on the "LAN Settings" button on the left, and under the "LAN Settings" tab, make sure that the "Enable DHCP Server" checkbox is checked, and the default IP range can be used later. When you're done, click the "Apply" button to save the settings:

In the future, we can click to enter the "DHCP Customer Information" tab to view the clients that have been connected to the router

Then, let's configure the wireless network. Click on the "Wireless Configuration" link on the left, then under the "Basic Configuration" tab on the right, uncheck the box in front of "Turn off wireless cable" and click the "Apply" button

Next, change the "SSID" below to your own name. Others can be used by default, as shown in the figure above;

For wireless networks, one of the most important is password security, and the wireless network at home must be set with a wireless password. We click on the "Security" tab, set the relevant encryption method and encryption password as needed, and then click the "Apply" button. It is recommended to use "wpa&wpa2":

The above is the setting of the local LAN that belongs to the router, and it can be successfully connected to the local network after the above settings are completed, so be sure to carefully check whether the local network is successfully connected. However, you can't access the Internet yet, and you have to make the following settings to connect to the Internet;

Finally, let's configure the settings for Internet access (here we use PPPoE dial-up network as an example). Click "WAN Settings" on the left, then click on the "PPPoE User" single option on the right, and then fill in the correct PPPoE account and password below

The PPPoE account and password are the dial-up Internet accounts and passwords given to us by the ISP Internet service provider, and the other settings are exactly the same as those for dynamic IP users. Finally, we can decide whether the router will automatically connect to the Internet, keep the network connected, and finally restart the router.

1. Enter in the browser address: , then press the enter key (enter) to confirm, enter the login account password, the default login account password is guest, and you can enter the Leike wireless router setting interface after entering. (You can check the login account information on the back of the router.)

2. Leike now has a quick configuration function, which greatly simplifies the setup steps. As shown in the figure below, click Quick Configuration, even if the router is set for the first time, it can be set up at one time in this interface.

The wireless Internet account password is set in the following wireless configuration settings: the wireless status is selected to turn on, and the SSID number is the wireless connection account, which can be filled in by yourself. Set --- password for security, and fill in the password, which is the password for the wireless connection.

By default, WPA-PSK WPA2-PSK AES encryption is selected for security mode.

Click Save to take effect, so that the wireless password is set up.

Note: If your version of the Leike router does not have this quick setup feature, you can --- Wireless Security Management in Wireless Management, this setting, the same.

3. Generally, the DHCP service is turned on by default and the IP address is automatically assigned, otherwise you have to manually fill in the IP when you surf the Internet, which is more troublesome.

Hope it helps.

1.Open the browser, enter in the address bar, and press Enter to enter the router login interface.

2.There will be a router login username and password in the router manual, find it and enter it into the login box. If there is no manual, you can try to enter the default username guest of Leike router, and the password is the same as guest.

3.The router interface you enter is as follows:

First, enter the router, (open the IE browser, enter OK in the address bar, OK if not.) In the login box, fill in the username and password admin or guest. On the left is the menu, and there are submenus under those + signs. ）

Second, in the settings interface of the router, find the settings of the wireless connection, and you can fill in the wireless password, note:

Encryption method: wep WPA2 PSK

Password setting: 32 digits plus letters are mixed with case and case to prevent rubbing the net.

2. Go to the router settings, check the dynamic IP, and then go next.

3. Set the wireless network SSID, set the security password, and click Save.

Restart your router and you're ready to go.

You don't choose PPPoE, choose dynamic IP, and then the next step.

Leike router wifi password setting:

1. Open the browser, enter the router box or the manual) Enter the router account and password.

2. Click [Wireless Management] - Security Management

Security Mode: Select any security mode, for example: WPA-PSK Key Type: Select any key type, for example, AES

Key format: Choose one of 2.

Key: Enter the wifi password.

After the setting is complete, click Save to take effect.

The list shows several encryption methods. If one of your laptops can be connected, the encryption is successful.

If the password is incorrect, you can try deleting the profile of the preferred network connection in the wireless network connection, and delete it cleanly. Then try again.