What should I do if the steering wheel is not right? Steering wheel is not correct solution

Go to the repair shop to check the tires and chassis suspension and other components to confirm that there is no abnormality, and then check and adjust the four-wheel alignment, do not blindly adjust, if it is a suspension problem, you have to adjust the four-wheel alignment after maintenance, under normal circumstances, adjusting the four-wheel alignment can be solved. If the tire pressure is abnormal, the vehicle will drive to the side with low air pressure, and when the vehicle goes straight, the direction will shift, and the inaccurate four-wheel alignment data of the vehicle will also cause the vehicle to drive the steering wheel incorrectly. There is a drag brake phenomenon on one side of the steering wheel, which causes the unilateral resistance of the vehicle to increase, so that the vehicle should adjust the direction to keep the vehicle running normally when driving, so that the vehicle is not in the right direction.

This is a typical four-wheel alignment problem, just go to a tire shop to re-adjust the four-wheel alignment value, which is very convenient and not a big problem. Such as satisfied.

The installation between the steering wheel, the steering knuckle and the front axle of the car has a certain relative position, and this installation with a certain relative position is called steering wheel alignment, also known as front wheel alignment. Front wheel alignment includes kingpin casting, kingpin casting, front wheel camber, and front wheel toe, which is for the two steering front wheels. For the two rear wheels, there is also a relative position to the rear axle mounted, called rear wheel alignment, which includes wheel camber and rear wheel by rear

Adjust. Knock the steering wheel of the vehicle to the right, revealing the rear of the left front wheel. Loosen the fastening nut with a wrench, rotate the left tie rod clockwise, and screw the left tie rod to shorten.

Then repeat the previous steps and knock the steering wheel to the left, revealing the back of the right front wheel. Rotate the right lever counterclockwise, and the right lever is elongated.

If the left lever is rotated in one week, then the right lever must also be rotated out for one week, and the amount of adjustment on both sides must be the same. Adjustment of the steering tie rod, if the steering wheel is in front, if the steering wheel is to the left, the left wheel will extend the tie rod outward, and the right wheel will be shortened inward, if the steering wheel is to the right, it will be the opposite.

The situation of improper deviation of the steering wheel is generally related to tire pressure, tire wear, chassis component wear, and four-wheel alignment. You can measure the tire pressure first, and when the tire pressure on both sides is not consistent, the vehicle will drive to the side with low air pressure. If there is no problem with the tires, check the use of the chassis parts, and the change in the value of the wheel alignment will also lead to the problem of improper steering wheel after a period of use, and it is also possible that the tie rod is offset to one side and causes the steering wheel to be misaligned.

Hope, thank you.

1. First of all, we must be clear that this adjustment is the steering lever, which is an important part of the steering mechanism of the car, which directly affects the operation of the car.

Longitudinal stability, running wheel safety, tire service life.

2. Adjusting the length of the steering tie rod does not require us to "cut short" or "extend", but to "screw" or "spin out" the base of the tie rod

Can. First, prepare the wrench, and then turn the steering wheel of the vehicle to the right to expose the rear of the left front wheel. Use a wrench to loosen the fastening nut first, then.

After rotating the left tie rod clockwise, clockwise is the position of the tie rod relative to the base of the tie rod, and the left tie rod "screwing" is shortening.

3. Then repeat the previous steps, and hit the steering wheel to the left, exposing the rear of the right front wheel. Similarly, first loosen the fastening nut with a wrench, and then rotate the right tie rod counterclockwise, and the right tie rod "unscrewed" is elongated.

4. Note that if the left lever is screwed in for a week, then the right lever should also be selected for a week, and the adjustment amount on both sides must be the same. The above is the square.

If the steering wheel is tilted to the right, the opposite is true. That is, the left lever is rotated out for a week, and the right lever is rotated into one.

Zhou, of course, the amount of this rotation should be grasped by yourself.

Four-wheel alignment adjustment steering wheel should be in a straight and middle position in driving, due to the vehicle in the driving, vehicle positioning data changes, wheel pressure changes, suspension rubber sleeve loosening and other conditions of grip rent, Duan Jue Zhao will cause the steering wheel is not in the straight position when driving Hongkai There are two situations: one is that the steering wheel is not right, but the vehicle can keep driving in a straight line, and this phenomenon is four-wheel positioning according to the steering wheel.

You can go to the store and get it.

The reasons for the steering wheel sinking are: 1. Insufficient booster oil, 2. Tire pressure is too low, 3. Bearing fit is too tight, 4. Booster problem, which can be dealt with according to the actual situation.

1. Insufficient booster oil.

If it suddenly becomes very heavy one day, or slowly becomes heavier, it may be that the steering power oil is dirty, it is similar to the engine oil, and it needs to be replaced. Or if there is less oil leakage, then there is less power, so the steering wheel becomes very exciting. In this case, it is necessary to maintain it in time, or to add and change the steering oil.

2. The tire pressure is too low.

If the tire pressure is too low, the area of contact between the tire and the road surface will increase, the friction will increase, and the steering difficulty will increase, resulting in a heavy steering wheel, which is not conducive to driving safety.

3. The bearing fit is too tight.

For a rolling bearing connected to each steering system, it is also closely matched with the sliding bearing, so it will lead to the lubrication of the bearing can not be well run, which will affect the phenomenon of stagnation, causing the steering wheel to become sinking, this situation should check the mechanical part and the booster system, or rule out whether there is no lead leakage and damage to the inlet seal.

4. Booster problem.

The relationship between the steering wheel and the booster is inseparable, so when the steering wheel becomes very heavy, it is likely that there are some poor circuit contacts or other problems inside the booster system, which should be repaired by the 4th shop.

Four-wheel alignment adjustment steering wheel should be in a straight and middle position in driving, due to the vehicle in the driving, vehicle positioning data changes, wheel pressure changes, suspension rubber sleeve loosening and other conditions of grip rent, Duan Jue Zhao will cause the steering wheel is not in the straight position when driving Hongkai There are two situations: one is that the steering wheel is not right, but the vehicle can keep driving in a straight line, and this phenomenon is four-wheel positioning according to the steering wheel.

There are many reasons why the steering wheel of the car cannot automatically return to the right, including damage to the car steering machine, wrong toe value, damage to the pendulum, etc., which are analyzed below.

1. Damage to the steering gear of the car:

When the steering mechanism of the car is damaged, the car will have symptoms such as difficulty in steering or the direction cannot automatically return to normal. In this case, the gap of the steering machine should be readjusted, and lubricated with lubricating oil, if the car steering wheel still cannot be corrected, it should be checked by a professional in a repair shop or 4S shop.

2. The toe-in value is incorrect

If the car does not do four-wheel alignment after replacing the tires, the toe-in value of the car tires is wrong, the tires on both sides will not reach the parallel state, and the car will not automatically return to the right due to resistance when steering. In this case, the vehicle should be re-aligned and the toe value adjusted.

3. Damage to the pendulum

If the pendulum of the car is damaged, it will aggravate the wear and tear on the inside of the vehicle's tires and affect the automatic centering function of the steering wheel. In this case, replace it with a new pendulum glue.

Things to note about car steering machines:

1. When the car is parked, the steering wheel should be corrected, otherwise it will cause resistance to the steering machine, which will affect the life of the steering machine for a long time.

2. After the car replaces the tires, do the four-wheel alignment in time and check the steering machine.

3. Lubricate the parts of the steering machine on time.

What's going on with the steering wheel not right.

1. The steering wheel is not correct after the vehicle is used for a period of time, which has a certain relationship with the tire pressure, tire wear, wear and tear of various parts of the chassis, and four-wheel alignment. If the tread pattern of the two front tires is not worn consistently, it will also cause the vehicle to deviate.

2. If there is no problem with the tire, it is recommended to go to the 4S shop to check the use of various parts of the chassis, the value of the four-wheel alignment will also lead to the problem of improper steering wheel after using it for a period of time, and it is also possible that the cross tie rod is offset to one side and causes the steering wheel to be wrong.

The steering wheel of the car needs to be adjusted in time, otherwise the potential safety hazards are great when driving, and it is very easy to have some collisions.

The difference between a misaligned steering wheel and a mistracking:

Deviation does not necessarily mean that the steering wheel is not right, and the steering wheel is not necessarily wrong, and the two can also coexist, both deviation and steering wheel error. I have encountered someone who said that the steering wheel is not correct as deviation, because after he hit the steering wheel horizontally, the car will run to the side, and he thinks that it is misaligned, but in fact, it is just that the steering wheel is not right.

Therefore, if you want to know whether your car is off, then find a relatively straight and flat road with few vehicles to try, it must be a flat road, potholes are not allowed, because the wheels will change direction when they press over potholes and bulges, and some roads will also have errors in the middle high and low in order to drain water.

Four-wheel alignment adjustment steering wheel should be in a straight and neutral position in driving, because the vehicle is in motion, vehicle positioning data changes, wheel pressure changes, suspension rubber sleeve loosening, etc., will cause the steering wheel is not in the straight position when driving The steering wheel is not in the straight position There are two situations: one is that the steering wheel is not right, but the vehicle can keep driving in a straight line, and this phenomenon is four-wheel alignment according to the steering wheel.

1.Four-wheel alignment: The installation between the steering wheel, the steering knuckle and the front axle of the car has a necessary year-on-year position, which is called steering wheel positioning, also called front wheel alignment.

The front wheel alignment includes kingpin cast, kingpin cast, front wheel camber, and front wheel toe, and is suitable for both steering front wheels. For both rear wheels, the same year-on-year position as the rear axle, the steering wheel is not aligned.

1.Wheel alignment:

The installation between the steering wheel, steering knuckle and front axle of the car has the necessary year-on-year position, which is called steering wheel positioning, also known as front wheel alignment. The front wheel alignment includes kingpin cast, kingpin cast, front wheel camber, and front wheel toe, and is suitable for both steering front wheels. For both rear wheels, the year-on-year position is the same as the rear axle, which is called rear wheel alignment.

Rear wheel alignment includes wheel camber and toe-in, so front wheel alignment and rear wheel alignment are collectively referred to as four-wheel alignment.

2.Add a lead module:

Very attentive friends will basically find that there are one or more small lead blocks of different sizes on the edge of the wheel. Compared to the pretty wheels, these lead pieces don't seem to match. But it is these tiny lumps of lead that play a very important role in stability at high speeds.

3.Wheel Balancing:

A car wheel is a whole made up of tires and hubs, but due to manufacturing reasons, the mass distribution of the parts of the whole cannot be very even. When the wheels rotate at high speed, they will develop and change into dynamic imbalance, resulting in the phenomenon of wheel shaking and steering wheel shaking during driving.

If the steering wheel is not correct and needs to be corrected immediately, if you can't solve it yourself, you can go to the 4S shop to find a professional repairman to make adjustments. What is the problem that the steering wheel is not right.

1.After using the car for a period of time, the steering wheel is not correct, which is basically related to tire pressure, tire wear, chassis parts wear, and four-wheel alignment. You can start by measuring the tire pressure on both sides.

When the tire pressure on both sides is not consistent, the car will drive to the side with low air pressure. If the wear of the two front tire patterns is not consistent, it will also affect the deviation of the car.

2.If there is no problem with the tire, it is recommended to go to the 4S shop to check the repair status of each part of the chassis. Changes in the alignment value of the four wheels will also affect the problem that the steering wheel is not straight after a period of use, and it is also possible that the steering tie rod is off to one side, which may affect the steering wheel.

Appendix: Methods and Procedures for Detecting Deviations:

1.Make sure that the air pressure of all four tires is exactly the same.

2.When the car is driving in a straight line on the straight, the steering wheel is in the middle position, and the car does not deviate; At this time the car is normal.

3.If there is no deviation when driving on the straight, it is just a steering wheel angle that is not correct, and it has nothing to do with the four-wheel alignment, and it can be solved by adjusting the length of the steering gear up and down levers. When you go to a 4S shop, adjusting the steering wheel angle is basically free, and you can get it in 5 minutes.

But going to a repair shop or something might charge you a little bit of a labor fee.

4. If the car deviates when driving on a straight road, you have to turn the steering wheel to one side to correct the deviation and make the steering wheel not right, which is a problem with the four-wheel alignment. I'm going to go to the shop to repair it. Bad steering wheel fix @2019

1.After the vehicle is used for a period of time, the steering wheel is not right, which is related to tire pressure, tire wear, chassis parts wear, and four-wheel alignment. You can start by measuring the tire pressure on both sides.

When the tire pressure on both sides is not consistent, the vehicle will drive to the side with low air pressure. If the wear of the two front tire patterns is not consistent, it can also cause the vehicle to deviate.

2.If there is no problem with the tires, it is advisable to check the use of the chassis parts at the 4S shop. Changes in the alignment of the four wheels can also cause the steering wheel to be misaligned after a period of use, or it is possible that the steering tie rod is offset to one side and the steering wheel is misaligned.

The steering wheel of the car needs to be adjusted in time, otherwise when driving, the safety hazard is very large, and it is very easy to have some scratches.

The difference between steering wheel misalignment and deviation:

Deviation does not necessarily mean that the steering wheel is not straight, and the steering wheel is not straight does not necessarily mean deviation. Both can coexist, the declination and the steering wheel are not correct. I met a man who said that the steering wheel was not right, because after he leveled the steering wheel, the car ran to one side, which was considered to be off-track.

Actually, it's just a bad steering wheel.

Therefore, if you want to know if your car is off the rails, try to find a straight and flat road with few vehicles. It must be a flat road and no potholes are allowed, as the wheels will change direction if they press over potholes and bulges. For Pai Chun Ling Shui, some roads are high in the middle and low on the edges, and there will be errors.

Millions of car purchase subsidies.