How to sew the leather steering wheel cover, how to sew the steering wheel cover

Use Dani leather.

Go to the decoration shop to sew the master, and you need to have experience if you don't sew well.

1. First of all, we put the steering wheel cover (semi-finished product) we bought on the steering wheel of the car.

2. Then adjust the position of the steering wheel cover and make sure that the two sides are evenly proportioned.

3. At the beginning of suturing, many people don't know how to fix the thread. Actually, the way to fix it is very simple, it is to pass the needle through the inside of the steering wheel cover (note that the end of the line should be knotted).

4. After threading and tightening the thread, thread it through the suture on the outside one by one. The direction of threading the needle, how everyone wears it easily, does not necessarily have to be the same as the seller's sewing.

5. As long as each stitch passes through, the back thread must be tightened, and only when it is tightened will it be firm.

6. When sewing to a place with a barrier, just transition from each stitch to the suture on the other side.

7. Sewing to the end is the end part. In order to ensure that the thread will not fall off, you must sew it several times in the last stitch, and after sewing, tie two dead knots, and then hide the thread.

Before I helped a BMW 740 do the whole interior cleaning, exterior waxing, replacement of accessories, interior renovation. Finish the last project today and upgrade the 3D hand-stitched steering wheel cover.

First of all, the leather steering wheel is set on the steering wheel and then sewn it with a needle and thread. After sewing, thread a stitch every other space, one on the left, one on the right, and then tie a knot in the leather until the entire steering wheel is sewn.

Very good, the leather steering wheel cover feels very good and has strong safety, because the leather steering wheel cover is fixed on the steering wheel by sewing, and there is no situation where the steering wheel sleeve rotates but the steering wheel does not rotate, which effectively ensures the safety of the vehicle.

What are the functions on the steering wheel of the vehicle.

There are multi-function keys on the steering wheel of the vehicle, which can control the vehicle's cruise control system and the vehicle's multi** system. They are in the form of shortcut keys that can also be adjusted on the vehicle's dashboard, making them very quick and easy to use. Some models are equipped with a heated steering wheel.

01 Glue the inside of the leather with double-sided tape, and don't remove the protective layer first! If you buy online, the general double-sided tape will be given, red thread, thimble, small scissors, etc. Pay attention to the small bevel on the lower right side of the picture, and the double-sided tape will be more sticky!

02 Put the leather glued with double-sided tape on the steering wheel, pay attention to turn off the engine and let the steering wheel lock automatically, which is easier to operate, and align the 6 o'clock direction according to the position in the picture.

03 Tear off the double-sided tape after alignment, and press it with your hands, if it is not too uneven, you need to adjust it immediately, this place can use more time, sharpen the knife and do not mistake the woodcutter.

04 Slowly plug the 3 o'clock, 6 o'clock and 9 o'clock directions of the three steering wheels with a thin plate tool, stuff the holster into the gap and clamp it, usually turning the leather outward, and then slowly stuffing it inside with a thin plate to protect the front of the holster from being damaged.

05 After plugging the edge, start stitching, measure the line, generally take 2 times the length of the straight line distance, too long and too short are very troublesome, in the position of the needle in the figure, one end of the thread is knotted, first thread the needle from the inside out, leave the knot inside, pay attention here, do not tie on both sides of the tape, otherwise the needle will be very sticky, I am sad, wipe the needle with paper for a long time to wipe the needle clean. After starting the needle, thread a needle every other space, one needle on the left and one needle on the right, the interval is the same, until the position of 3 o'clock, and then tie the knot after penetrating the cortex, cut the thread, leave 5mm to burn it with fire, it doesn't matter;

06 When sewing the upper half, you can ignite the car, turn the steering wheel 180° and then turn it off.

07 3 o'clock and 9 o'clock position of the small bevel, here when threading the needle, pay attention to the need not to strictly follow the method of threading the needle every other space, because here you need to sew up from under the steering wheel, the angle is very small, very picky, you can drill your head under the steering wheel, the steering wheel can be loosened to adjust the handle, let the steering wheel move up and down or back and forth, adapt to the working position of the hand, master the needle spacing by yourself, and ensure that the two sides are aligned when you reach the arc section.

08 Finally, after sewing, tie the knot, burn the thread with a lighter, and then press it flat.

The hand-sewn steering wheel cover has the effect of anti-slip and vibration reduction, and the appearance is fashionable and generous, which is deeply loved by car owners and friends. Hand-sewn steering wheel requires some skills, if the sewing is not good, not only will it affect the overall appearance, but also affect daily use, today to summarize, the method of hand-sewing leather steering wheel cover.

Steering wheel cover, needle and thread, scissors, thimble, lighter, plug board.

01 Glue the inside of the leather with double-sided tape, and don't remove the protective layer first! If you buy online, the general double-sided tape will be given, red line, thimbles, scissors, pay attention to the small bevel angle on the lower right side of the picture, and multi-adhesive double-sided tape.

02 Put the leather with double-sided tape on the steering wheel, pay attention to turn off the engine and let the steering wheel automatically lock, which is easier to operate, and align the 6 o'clock direction according to the position in the figure, start sewing from the largest position, first set the position in the middle, and then sew to both sides, so that the leather is not easy to pile up in a corner because of the error.

03 Carefully observe whether the position of the right splicing is aligned, in fact, the sewing is from here, set a stitch, and then pull the thread to both sides, the so-called sewing, in fact, is not really like our clothes, but like tying shoelaces, constantly threading, tightening.

04 As you can see, under the leather case that has been set is the double-sided tape that has just been pasted.

05 Tear off the double-sided tape after alignment, and press it firmly with your hands, if it is not even and need to be adjusted immediately, this place can be used for more time.

06 Slowly stuff the holster on the steering wheel with a sheet tool, stuff the holster into the gap and clamp it, usually turning the leather outward, and then slowly stuffing it inside with a thin plate to protect the front of the holster from being damaged.

07 Start stitching after plugging the edge, take 2 times the length of the straight line distance after measuring the line, start the needle at the position in the figure, tie a knot at one end of the thread, thread the needle from the inside to the outside, leave the knot inside, pay attention, do not tie it on both sides of the tape, otherwise the needle will be very sticky.

After starting the needle, thread a needle every other space, one needle on the left and one needle on the right, at the same interval until the 3 o'clock position, and then tie the knot after penetrating the cortex, cut the thread, and leave 5 cm to burn with fire.

08 The small bevel angle at 3 o'clock and 9 o'clock can not strictly follow the method of threading the needle in the air, because it needs to be sewn up from under the steering wheel, the angle is very small, it is very picky, you can drill your head under the steering wheel, the steering wheel can be loosened to adjust the handle, let the steering wheel move up and down or back and forth, adapt to the working position of the hand, master the needle interval by yourself, and ensure that the two sides are aligned when you reach the arc section.

09 There will be some remaining skin at the bottom, which can be cut off with a knife, or glued with double-sided tape to close the edge, that is, to complete the whole sewing work. The general time is 1 1/2 hours to 2 and a half hours, depending on the individual's familiarity and technique.