Is there any difference between the licensed goods of the watch and the domestic assembly of the ori

The domestic assembly quality of the original movement is worse than that of the licensed goods.

Licensed goods are relative to parallel goods.

In other words. Licensed goods refer to overseas goods that have entered the domestic market through formal channels such as legal customs declaration procedures. Licensed goods can enjoy after-sales service and quality assurance in the domestic market.

The so-called original packaging refers to a product or thing that is produced by the original factory and not jointly assembled by outsourcing or other authorized manufacturers.

Due to the fact that after the liberation of Chinese mainland, and there are many imperfect production conditions, production technology.

Manufacturers who are not too hard are constantly entrusted to the parts and components of products produced by some well-known brands, or OEM.

or joint venture, but due to their own reasons, the overall quality of the final product is uneven, so consumers always crave the desire for "original" in their hearts. I always hope to choose the "original" products that are better in terms of performance, quality and so on.

For example, mobile phones, the "original" machine refers to the original production, without the OEM of other manufacturers to add or decrease the function, and has not been disassembled or repaired for any reason.

Licensed goods, that is, **. All accessories are produced by the original factory, or by the original authorized factory. But the original movement is assembled domestically, and as the name suggests, the movement is imported and original.

Other accessories are domestically produced. This kind of imitation is high, and the appearance can be very similar. But the quality must be worse than the original, otherwise ** would not be so much worse.

I hope I can help the landlord.

The differences between the two are as follows:

Difference 1: The movement used is different.

Domestic movements generally use Tianjin Seagull movement, Shanghai Watch Factory movement and Guangzhou Pearl movement; Swiss movements, on the other hand, usually refer to the movements of the ETA movement factory.

Difference 2: The standard of time error is different.

The error of domestic movement 25-50 seconds is an excellent product, and 60-120 seconds is a qualified product; While a Swiss movement has a normal error of 30 seconds, a chronometer-certified movement can reach a minimum of about 5 seconds.

Difference 3: The brand effect is different.

The development of domestic movements is relatively late, and the quality, material and workmanship are lagging behind those of Swiss movements, so the brand effect is poor; The Swiss movement developed early, has a long history, and has a strong brand effect.

Difference 4: The best on the market is different.

Mechanical watches made with domestic movements are still lower than Swiss movements in the market, and they belong to civilians; The number of mechanical watches made with Swiss movements is often tens of thousands, or even millions, which is far more expensive than the market for domestic mechanical watches.

The original single of the watch is a high imitation, only if you believe it, the first 3142 in the 721 and the rear 061

Repetition is the mother of learning.

My honor is my life, and I will not let the world see a white head.

In general, there is not much difference in answers. It's like the difference between building a computer and a branded computer. Swiss original brand watches are tested and screened for movements, such as ETA2892 movement, the daily error is considered qualified within plus or minus 30 seconds, but Longines will choose a movement with an error of plus or minus 10 seconds.

There is also the waterproofness of the watch, and the high-imitation watch assembled in China is almost not waterproof. There is no after-sales maintenance of high imitation watches.

Question: Is it possible to assemble a 2824 Swiss movement Longines watch and **2824 is it different?

How long does it take to learn to wear watches?

132ioiuouio

TA has over 3469 likes.

Let's talk about following. Become the 101st fan.

According to my experience, it will take two or three years to really learn the mechanical watch, because different types of watches (such as manual and automatic watches), different styles of watches (men's and women's) have very different structures, and the structure of watches produced in different countries is not the same, it is not easy to really understand how to disassemble and assemble so many types of watches, another automatic watch, there are more than 100 parts inside, each part may fail, you have to learn to judge the failure, on this basis, repair it (or replace the parts) The troubleshooting of individual parts requires rich experience and superb technology (such as finishing the balance spring), and the fault maintenance technology can not be done overnight, but needs to be continuously explored and improved in the process of long-term maintenance practice. Of course, the mastery time of watch repair is also related to the understanding of the eight, and a talented person may be able to work hard for a year. As for the tuition fee, the master is generally not too demanding, and the master values having a well-behaved and clever apprentice who can help the master share the pressure.

Domestic mechanical watch movements like Seagull, Shanghai, and Beijing are all good.

Automatic mechanical movement, is relative to the hand-wound mechanical watch, automatic mechanical movement watch is a self-winding watch, is the use of the movement at the bottom of the rotor disc swing left and right to generate power to drive the mainspring to generate energy, but the relative thickness of the watch itself will be thicker than the general hand-wound watch. Several major domestic manufacturers are imitating Swiss movements, Seagull, Hangzhou, Shanghai, Dandong and Guangzhou.

The main models are 2824, 2892, 7750, which are the most common ETA cores on Swiss watches. Because it is imitation, it is difficult to see in appearance, such as the Shanghai imitation of 2824, which is said to have been improved on the original basis, but this is not visible without dismantling the movement. At first, some cousins thought that it could be distinguished by the shock, but it turned out that the original ETA movement used both types of shock, and this was not the way.

As for stability, domestic imitation cores are good, such as seagulls and others, which also have good stability, which is not much worse than the low-end cores of ETA. A watch repairer told me that he had handled two Shanghai replica 7750 pieces, and the daily difference could be maintained at 2-3 seconds. So it's not easy to compare from this aspect.

Generally speaking, everyone thinks that due to the problem of materials, the durability of domestic cores is not as good as that of Switzerland, and the accuracy is easy to decline after a long time, but you can't observe it for a year or two, right? Of course, I'm not saying that the domestic imitation core is so good that there are inferior, and there are also inferior quality, but some high-imitation watches are worth thousands, and a Seagull's 2824 is less than 300, so it is completely stress-free to use.

In short, for novices, there is almost no quick way to master how to distinguish, and this still depends on the accumulation of experience after more contact. However, there are still some doorways that can be seen from **, such as the mechanical watch in Switzerland will not be lower than 3000, the observatory will not be lower than 8000, and the 7750 computer is close to 1wThere are two other methods that cannot be counted as 100% resolution, the first is for the seagull, because the seagull especially likes to play fish scales on the movement, and this one looks very beautiful, looks classy, and many watches like to use, so once you see the movement full of fish scales, be careful.

There is a saying that the balance wheel used by ETA on different grades of movements is different, the low-end balance wheel on the balance wheel is straight, and the high-end one has a certain slope, and many of these are astronomical observatories, so if you find that the balance wheel column of the watch is not straight, and the watch itself is not an observatory, it is also possible that it is fake.

Nowadays, major brands are fighting the best war, and some brands have begun to use their own movements, it is obviously impossible to think that they have used a budget of 3W to get a watch with a self-produced movement, and the threshold of self-produced movements will not be less than 5W, and now it is different With the development of technology, Swatch's control of ETA general movements has forced major brands to develop their own movements, and we can still see several self-produced movement watches in the 3W range, let's list them.

1) Oris Diving Series

Oris and TAG Heuer are also known as the two Hao, the overseas popularity is relatively high, the time into the inland is not long, so the popularity is not high, the essence of Oris watchmaking is to make performance sports watches, so the application of the movement is more elegant, this watch is equipped with the Oris 400 movement, can reach 120 hours of power reserve, waterproof depth of 1000 meters, is the waterproof depth of three Rolex water ghosts, it is incredible, it also has excellent anti-magnetism, can effectively improve the service life of the watch. And the movement can reach a 10-year warranty period.

2) TUDOR Black Bay series

In order to avoid confusion between in-house movements and imported movements, TUDOR has launched a new movement system, positioning the entry-level watches to use the basic movement and use the own movement in the high-end series, the MT5400 is the original TUDOR movement, certified by Switzerland (COSC), equipped with a silicon balance spring, and a full chain that provides a power reserve of 70 hours.

3) Breitling Yellow Wolf diver's watch

Breitling Yellow Wolf is the brand in order to lower the bar so that more watchmates can feel the Breitling brand, this watch is water-resistant to 3000 meters, surpassing most deep diving watches, including Rolex's Deep Sea Ghost King, this performance is rare in its class, equipped with a Swiss (COSC) certified 17 calibre, 38 kinetic energy reserves, the yellow dial is quite eye-catching, and the 45 mm case is very rough.

Summary of Tips:With the development of the watchmaking industry, the application of independent movements will gradually increase, independent movements are obviously higher in performance than general movements, in order to ensure that the brand is well-known on the premise of paying more attention to independent movements, how do you evaluate the 3W positioning of the watch selection problem? Please leave a message to share.