There are several ways to tie your shoelaces, ways to tie your shoelaces

It's hard to make it for you.

Most of the shoes on the market now still need to tie shoes, one reason is that the shoes can be fixed, and the other reason is that they can add points to the beauty of the shoes, and many friends may not be able to tie their shoes, so today I will introduce you to two simple ways to tie shoes.

1. First of all, the two ends of the shoelaces are natural, and the two ends of the shoelaces are staggered together in the middle, then the left shoelaces are wrapped around the right shoelaces, and then straightened, and then the left-hand shoelaces are folded into double layers, and then the right-hand shoelaces are folded up and put on it, and then the shoelaces on the top are put into the hole in front of the left, and finally tidy it up.

2. First straighten the two ends of the laces, then stagger the two ends of the laces inward, and then wrap the laces around each other, then open the index finger and thumb of both hands to form a bracket shape, and then use this bracket frame made of fingers to erect the left and right shoelaces, and then stagger the left and right shoelaces, and use the left thumb and index finger to pull the right shoelace, and the right thumb and index finger to pull the left shoelace, and finally tighten it.

The above is the method of tying shoelaces, everyone has their own more personalized method of tying shoelaces, but considering the efficiency and convenience, the second method in the above is recommended, because the second method does not have too much troublesome operation, and it is very easy to use, as if tying a slipknot, the only drawback is that it is easier to drop, so the frequency of re-tying is relatively high, if you are out of the activity for a whole day, you need to re-tie it three to five times a day.

You can tie a bow by folding the left hand lace into a double layer, then folding the right hand lace up and putting it on top, and finally threading the top lace through the hole in the left front.

1. First of all, the ends of the laces are natural.

2. Stagger the ends of the laces to the middle.

3. Wrap the left shoelace around the right shoelace and straighten it.

4. Fold the left-hand shoelaces into a double layer.

5. Fold the shoelace on the right hand side up and put it on it.

6. Thread the shoelaces on them through the hole in front of the left.

7. Tidy up the shoelaces and tie them.

Notes:When you finally tighten the laces, you should tighten them hard, otherwise the laces will come loose before you have taken a few steps.

There are many ways to tie your shoelaces, and here are seven common and good-looking ways to tie your shoelaces, as follows:

1. Cross knots1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

2. Trapezoidal knots1. After adjusting the length of both ends of the laces, pull out the laces from the inside to the outside;

2. Pull out the shoelaces and thread them into the second hole from the outside to the inside;

3. The left shoelace is worn out from under the shoelace between the two holes on the right, and the right side is the same;

4. Repeated operation;

5. Pay attention to the direction of the cross laces at both ends;

6. Excess shoelaces are stuffed into the shoes and knotted;

7. The trapezoidal knot after completion.

3. Twist knots1. Two shoelaces are knotted inside and worn out;

2. Wear out of the second hole after the two shoelaces are crossed;

3. At this time, in order to center the intersection as much as possible, tighten the laces;

4. The appearance of twist is produced in the process of centering the intersection;

5. Enlarged twist knots**;

6. Leave the last hole;

7. Finally, use x to deal with it, so that it is more convenient to put on and take off;

8. The remaining shoelaces are knotted together in the shoes.

Fourth, double X knot1. Start with the second hole and run through the laces from the outside to the inside;

2. Tie white shoelaces with the X knot method;

3. White X knot look;

4. The end is plugged into the inner side and knotted;

6. Knot the ends of the blue laces;

7. The remaining lines are relatively long, and you can make a ring;

8. Go around a few times and pass through the ring.

Fifth, double direct knots1. After leaving a length of yellow laces, they are worn out of the left face and entered from the right face;

2. Wear shoelaces in the direction of the dotted line;

3. Adjust the shoelaces so that they remain in a straight shape and do not roll them up;

4. Tuck the excess part into the shoe;

5. Also leave a section of the white shoelace on the inside, and knot it with the yellow shoelace inside;

6. Wear shoelaces in the direction of the dotted line;

7. Adjust the white shoelaces so that they are on top of the yellow shoelaces;

8. The excess part is knotted with the yellow laces on the inside of the shoe.

6. Diagonal knots1. After passing through the first hole, make a single knot inside, and the other end passes through the third hole on the left side from the inside to the outside;

2. The shoelace is then threaded through the second hole on the right side;

3. Use blue laces to complete the slash knot;

4. Use white shoelaces to tie a diagonal knot in the opposite direction;

5. The method is the same as that of blue shoelaces;

6. The blue and white laces eventually come out of the hole of the tongue part;

7. The appearance of piercing out of the tongue part;

8. It looks better if it is loosely tied.

7. Internal X knot1. After something is consistent at both ends, each end is pierced through the second hole;

2. Penetrate into (2) hole from (1) hole, and then penetrate out from (3) hole;

5. Knotting on the inside;

6. The finished style.

Teach you 3 good-looking ways to tie your shoes, friends have praised them all after reading them, ways to tie your shoes quickly, tips for tying your shoes, and life hacks.

Teach you three ways to tie your shoes.

2. Pierce a from the left shoelace hole of the third row, from the left hole of the fourth row, from the third hole on the right, and then through the fourth hole on the right side to complete the word "mouth". One end of the shoelace B that begins to be located on the right side is pierced from the third hole on the right side, and the third row on the left side is penetrated; Penetrate from the fourth hole on the right side, penetrate through the fourth hole on the left side, complete the "mouth" two horizontal.

3. Use B to penetrate from the fifth hole on the left and the fifth hole on the right.

4. Same as step 2, except that this time it becomes A to do two horizontal, B to do two vertical.

5. Cut two small pieces from the red paper belt or another shoelace, stick them on the picture that has been tied, and the word "Xi" is completed.

There are many ways to tie your shoelaces, and here are seven common and good-looking ways to tie your shoelaces, as follows:

1. Cross knots1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

2. Trapezoidal knots1. After adjusting the length of both ends of the laces, pull out the laces from the inside to the outside;

2. Pull out the shoelaces and thread them into the second hole from the outside to the inside;

3. The left shoelace is worn out from under the shoelace between the two holes on the right, and the right side is the same;

4. Repeated operation;

5. Pay attention to the direction of the cross laces at both ends;

6. Excess shoelaces are stuffed into the shoes and knotted;

7. The trapezoidal knot after completion.

3. Twist knots1. Two shoelaces are knotted inside and worn out;

2. Wear out of the second hole after the two shoelaces are crossed;

3. At this time, in order to center the intersection as much as possible, tighten the laces;

4. The appearance of twist is produced in the process of centering the intersection;

5. Enlarged twist knots**;

6. Leave the last hole;

7. Finally, use x to deal with it, so that it is more convenient to put on and take off;

8. The remaining shoelaces are knotted together in the shoes.

Fourth, double X knot1. Start with the second hole and run through the laces from the outside to the inside;

2. Tie white shoelaces with the X knot method;

3. White X knot look;

4. The end is plugged into the inner side and knotted;

6. Knot the ends of the blue laces;

7. The remaining lines are relatively long, and you can make a ring;

8. Go around a few times and pass through the ring.

Fifth, double direct knots1. After leaving a length of yellow laces, they are worn out of the left face and entered from the right face;

2. Wear shoelaces in the direction of the dotted line;

3. Adjust the shoelaces so that they remain in a straight shape and do not roll them up;

4. Tuck the excess part into the shoe;

5. Also leave a section of the white shoelace on the inside, and knot it with the yellow shoelace inside;

6. Wear shoelaces in the direction of the dotted line;

7. Adjust the white shoelaces so that they are on top of the yellow shoelaces;

8. The excess part is knotted with the yellow laces on the inside of the shoe.

6. Diagonal knots1. After passing through the first hole, make a single knot inside, and the other end passes through the third hole on the left side from the inside to the outside;

2. The shoelace is then threaded through the second hole on the right side;

3. Use blue laces to complete the slash knot;

4. Use white shoelaces to tie a diagonal knot in the opposite direction;

5. The method is the same as that of blue shoelaces;

6. The blue and white laces eventually come out of the hole of the tongue part;

7. The appearance of piercing out of the tongue part;

8. It looks better if it is loosely tied.

7. Internal X knot1. After something is consistent at both ends, each end is pierced through the second hole;

2. Penetrate into (2) hole from (1) hole, and then penetrate out from (3) hole;

5. Knotting on the inside;

6. The finished style.

The tips for tying shoelaces are as follows: LahuMaterial preparation: shoes, laces.

Operation steps: 1. Wrap the left shoelace around the right shoelace and then straighten it.

2. Grab the shoelaces on each side with both hands, and bypass the index finger and thumb of the left hand from behind, and the index finger and thumb of the right hand from the front.

3. Then go to the other side of the shoelace.

4. Pull it back violently after grabbing it.

5. Adjust the length of the rubber stare, tie it up, and practice more, which can save a lot of time at critical times.