The garment steamer does not produce gas, and the light is on and cannot hear the sound of boiling w

The garment steamer does not produce gas, and the switch light is on and the sound of boiling water cannot be heard because the garment steamer is short of water or has not been reset after adding water, and you need to see if the light on the side is on, and you need to press the reset button. When the garment steamer works, the internal heating pot continues to produce high-temperature steam, contacts the fabric and penetrates the fabric fiber tissue, softens the fabric fiber, pulls and presses, makes the fabric smooth and smooth, and restores the fabric to its own state.

Solution: If the new machine does not steam and there is a problem, go to the merchant to solve it.

The garment steamer has the sound of boiling water but no steam is sprayed, this situation may be blocked by the conduit, turn off the machine quickly, and clean the air outlet hole of the lower steam conduit and ironing panel.

If the garment steamer has been used for a long time, it may be broken, find a maintenance department to repair, under normal circumstances, it will not be steam, there is a heating movement in it is very simple, as long as it can be energized normally, there will be steam in the water tank.

The design principle of each brand garment steamer is different, and some may be blocked by the water inlet, and the phenomenon that occurs in this case is that the main machine will heat up, and there is no steam, resulting in no gas.

If there is no sound of boiling water, and the main engine is not hot, this situation may be due to the broken inner tank or the wiring problem.

Dehydration or failure to reduce after adding water. Whether there is a light on the side, and the button on the side is doubled.

What brand?

The garment steamer indicator light does not light up and does not produce steam, what is going on, hello dear, the indicator light does not light up after the garment steamer is plugged in, and the reason is as follows: 1. The garment steamer is not energized. The garment steamer suddenly does not work because the garment steamer is not energized, the switch of the garment steamer is damaged, or the electric board is short-circuited due to water leakage of the garment steamer, which will cause the garment steamer to be unenergized, and the plug needs to be unplugged to see if there is a short circuit problem in the garment steamer.

2. The garment steamer does not produce steam. If the garment steamer does not work, it may also be that there is no water vapor spray out of the garment steamer, the pipe is blocked, or the water level is insufficient, which will cause no water vapor to spray out of the garment steamer, and the water temperature needs to be increased above the lowest scale line, and if the pipe is blocked, it needs to be dredged. 3. The steam indicator light is not on.

The garment steamer will not work if the steam indicator light is not on, you need to wait for the steam indicator light to turn on, turn on the task button of the water pump, and you can continue to use it after the task light of the water pump is on, the steam indicator light is not lit to indicate that there is no steam generation, and the light will not turn on until it starts to generate steam. I hope that Envy can help you.

Hello, the possible reasons are as follows: it may be that the water tank is not put properly, and the water outlet is blocked. 2 4 The water in the water tank cannot flow out, so you can rearrange the position of the water tank at this time.

3 4 It may also be that the steam pipe is not smooth due to the bending of the steam hose, so that the steam can not be discharged, at this time, only the steam pipe needs to be dredged or the steam pipe can be replaced. 4 4 It may also be because the scale accumulates in the water pump, resulting in the garment steamer can not condense steam, at this time, only need to replace the water pump.

Reason 1: There is too little water, the water level is too low, and the water in the water box of the garment steamer should be filled before use, even if it is not full, it should be added to half of the water box before use. If the water level is too low, an alarm will be sounded, and the heating will not be able to be normal, and the steam will not be ejected normally.

So, once the garment steamer does not come out of steam, check the water box to make sure it is full of water. Reason 2: If you don't clean it, the garment steamer should be cleaned every once in a while, otherwise dust or foreign matter will block the steam hole, the steam will not be sprayed, and there will be no steam out of the garment steamer.

Check the cause first, and then clean up the foreign object according to the situation. Reason Souqiao 3: put the water box, not put the storage trough in the garment steamer not only has a water box, but also a storage trough, such as only put the water box, not put the storage box, will cause the water to flow in, there is no steam spray out of the garment steamer.

The correct way to deal with it is to take out the water box and put it back in the storage box. The world is fierce.

Summary. Hello dear! <>

I am glad to answer for you The reasons why the garment steamer does not have the sound of boiling water and does not produce steam are as follows: 1. The garment steamer needs to check whether the side lights are lit when there is a lack of water, and you need to press the reset button 2. When the garment steamer is working, the internal heating pot continuously produces high-temperature steam, so that the steam contacts the fabric and penetrates into the fabric fiber structure, and the fabric fiber is softened by pulling and pressing, so that the fabric is smooth and restores the fabric itself.

The garment steamer does not have the sound of boiling water and does not emit steam.

Hello, dear and hidden! <>

I am glad to answer for you The reasons why the garment steamer does not have the sound of boiling water and does not produce steam are as follows: 1. The garment steamer needs to check whether the side light is lit and needs to press the reset button 2. When the garment steamer is working, the internal heating pot continuously produces high-temperature steam, so that the steam contacts the fabric and penetrates into the fabric fiber structure, and the fabric fiber is softened by pulling and pressing, so that the fabric is smooth and restores the fabric's own state.

Hello dear, the following is purely for your expansion <>

Garment steamer, also called hanging iron, vertical iron, is a machine that can hang ironing clothes and fabrics. The garment steamer continuously touches the clothes and fabrics through the scorching hot water steam generated inside, so as to achieve the purpose of softening the fiber tissue of the clothes and fabrics, and smooths the clothes and fabrics through the actions of "pulling", "pressing" and "spraying", so that the clothes and fabrics are intact and the pants are closed as new.

Summary. Kiss. <>

<> am honored to answer for you, thank you for your patience and inquiry: There are three reasons why the garment steamer does not have the sound of boiling water and does not produce steam: 1. If the water pump is not used for a long time, the residual water in the pump will form scale or mucus, so that the chips in the pump will be bonded. 2. For new products, the water tank is not put in place or does not reach the specified water level.

3. If you use it for a long time and do not clean it, the filter screen is blocked or the steam hole is blocked. When the filter is blocked, the host is hot, but there is no sound of boiling water. If the steam hole is blocked, there is the sound of boiling water.

The garment steamer does not have the sound of boiling water and does not emit steam.

Kiss. <>

Flowers wither] <>

I am honored to answer for you, thank you for your patience and inquiry: There are three reasons why the garment steamer does not have the sound of boiling water and does not produce steam: 1. If the water is not used for a long time, the residual water in the pump forms scale or mucus, so that the chips in the pump are bonded. 2. For new products, the water tank is not put in place or does not reach the specified water level.

3. If you use it for a long time and do not clean it, the filter screen will be blocked or the steam hole will be blocked. When the filter is blocked, the host is hot, but there is no sound of boiling water. If the steam hole is blocked, there is the sound of boiling water.

Mix vinegar and water in a ratio of about 1:1, or take an appropriate amount of descaling and squeeze it into clean water to make a solution (it is not recommended to use a very corrosive detergent, which will corrode the inside of the machine). Open the sewage hole (generally at the bottom of the machine or the side of the fuselage), slowly pour the mixture from the sewage hole with a cup, screw on the knob, soak for 15-25 minutes, and wait for the scale to completely soften and differentiate, and then open the sewage hole to let the mixture be discharged, which can keep the fuselage with a travel slope, and then inject clean water to clean until it is completely clean.

Summary. The indicator light of the garment steamer switch is on, there is no sound of boiling water, and there is no steam, which may be because the garment steamer is short of water or the water is not reset. You need to see if the side light is on, and you need to press the reset button.

When the garment steamer is working, the internal heating pot continuously produces high-temperature steam, so that the steam contacts the fabric and penetrates into the fabric fiber structure, and the fabric fiber is softened by pulling and pressing, making the fabric smooth and restoring the fabric's own state.

The indicator light of the garment steamer switch is on, there is no sound of boiling water, and there is no steam, which may be because the garment steamer is short of water or the water is not reset. You need to see if the side light is lit and uplift and you need to press the reset button. When the garment steamer is working, the internal heating pot continuously produces a high-temperature steam noise wheel, so that the steam contacts the fabric and penetrates into the fabric fiber structure, and the fabric is softened by pulling and pressing, so that the fabric is smooth and restores the fabric's own state.

You've done a great job! Can you elaborate on that?

In this case, the pipe may become clogged. Quickly close and clean the air outlets of the steam pipes and ironing panels. 3. If the ironing machine is used for a long time, it may be damaged, please find the maintenance department for maintenance, generally will not emit pure steam, there is a heating action inside, it is very simple, as long as it can be energized normally, there is water in the water tank.

There will be steam. 4. The design principle of each brand of hanging ironing machine is different, and some may be blocked by the water inlet. Such a phenomenon is that the host will become hot, and no gas will be produced without steam.

5. If there is no sound of boiling water, and the host is not hot at the same time, it is clear that the liner may be ruptured or the pipeline rupture.

There are three main reasons why the garment steamer light is not heated and does not produce steam: the thermostat is broken, the fuse is burned, and the scale is too much and blocked.

1. The thermostat of the heating pot in the garment steamer is broken, and the thermostat needs to be replaced.

2. If there is no electricity, it means that the fuse of the garment steamer is burned, and the fuse is replaced.

3. It may be that there is too much scale blocking the steam outlet, and it is necessary to clean the internal water tank of the garment steamer with a mixture of water and vinegar.

The advantage of the garment steamer is that its nozzle is far away from the steam source, so the dirt produced by the water under the action of high temperature is not easy to splash on the clothes. In addition, the garment steamer also has a Youtan liquid potential, which is flexible to use, and it comes with a clothes rail to iron at any time.

However, the most headache of using the garment steamer is the problem of cleaning and descaling, after using it for a period of time, the water tank will accumulate dirt and the steam hole will be blocked, which will not only seriously affect the ironing effect, but also damage the machine itself.

Tips for using garment steamer

1. Let the garment steamer use an ordinary hanger to iron the pants with an ordinary hanger, and it is best to wear anti-scald gloves.

2. When ironing the hem of the clothes, grasp the sides of the clothes, tighten them for pressing, and be wary of the hot steam of the steam nozzle. (A more convenient way is to iron with a plywood.) I'm not afraid of hot hands and it's good to iron my clothes).

3. When ironing the collar, it is generally easier to turn the collar over and iron it from the back.

4. When it is hot to the sleeves of the clothes, the sleeves should be straightened a little harder, and the time for the steam nozzle to press on the sleeves should be a little longer, and the ironing should be pressed back and forth.