Is it better to use an electric heating plate or an electric heating film for the ondol What brand i

It is better to use carbon fiber electric heating plate, and it is better to use the board in terms of quality, and the carbon fiber electric heating plate is heated by carbon fiber short filament surface, which is heated evenly and the speed of heating is also faster. The temperature can be set, it is safe, and it is not afraid of water. For specific details, you can consult Dalian Duodian International ** Company, which is a company specializing in the sales and installation of electric geothermal and electric ondols.

Of course, the electric heating film is good, the tatami mat I installed is the electric heating film, the United States Kelle Rik electric floor heating global high-end electric heating film, very good, I have investigated for a long time, the electric heating plate is also good, but it is not suitable for you to do the kang heating unevenly, the heat is not paved with a reason for the cool and electric blanket.

From a professional point of view, it must be that the electric heating film is much better. Now most of the use of hobar (warm bar) carbon crystal electric heating film, all reflect the effect is good, how specific, it is recommended to understand.

I regretted dying after buying hobar electric heating film on JD.com.,The evaluation of this brand on JD.com is fake.。 I looked at the praise and bought four rooms of electric heating film, spent more than 7,000 yuan, and now the electric heating film under the tiles in the hall tripped as soon as the power was turned on, which was caused by the unqualified product. When you buy, the merchant does not tell you that there will be a problem with the tiles, and there is a problem after the paving, and the empty opening is small, so that you can change the big one, change it or trip, and let you remove the leakage protection, which will cause a lot of safety hazards.

Also deny, don't care about your losses at all. In addition, the heating spread under the floor is not good, and each room consumes more than 30 kilowatt-hours of electricity a night, which is not what they say on the JD website at all. I hope others don't fall for it.

0 dislike 0

No matter what, the whole piece of safety is better!

It is best to leave 5 10 cm of vertical space on the electric heating plate to avoid safety accidents caused by poor heat dissipation. The layer that comes into direct contact with the mattress quilt is preferably a wooden plank.

Electric heating is a high-quality, comfortable and environmentally friendly heating method that converts clean electric energy into heat energy, and after long-term practical application, it has been proven that it has many incomparable advantages of other heating methods, and has been recognized and accepted by more and more users around the world.

My family also made an electric kang and was ready to buy a 5 cm high-density sponge mat

Tiles, wooden floors are fine, wooden floors dissipate heat quickly, tiles are slower.

It is most suitable to spread a layer of felt, and the temperature does not come up when I spread it thickly.

Tatami mats are economical, practical, meticulous and beautiful, the floor area is also very small, which can save a lot of space, warm in winter and cool in summer, and it is very comfortable to rest on it.

The ordinary electric blanket without signal line type electric heating element is adopted, and if the temperature control is to be realized, there are generally two types of temperature control elements: one is the overheating safety thermostat, which requires about 8 9 electric blankets per bed, which are connected in series on the electric heating element and play a safety protection role; The other type is the thermostat controller, which is located at the head of the bed or at hand and plays the role of regulating the temperature. Electric blankets with electric heating elements with signal cables only require a thermostat.

With signal line type:

It is used in temperature-controlled electric blankets. The core of the wire is made of glass fiber or polyester yarn, which is wound with flexible and flexible electric heating alloy wire (or foil tape), covered with a nylon thermal layer or special plastic thermal layer, and then a copper alloy signal wire is wound outside the thermal layer, and the outermost layer is coated with a layer of heat-resistant resin.

When the temperature at any point on the electric blanket exceeds the predetermined value, the heat sensing layer on the corresponding heating wire at the place changes from an insulator to a good conductor, so that the control circuit is turned on and the electric blanket is powered off, so as to achieve the purpose of temperature control and safety protection.

In terms of safety, the electric kang does not need to be put away after installation, and the electric blanket needs to be folded when not in use, so the protection of the electric heating wire is better for the electric heating ondol;

In terms of heat conduction efficiency, the insulation layer of the electric blanket is thinner and heats faster, but it cools faster when the power is cut off.

The plumbing kang is better for the body.

Advantages: health care: ground radiant heating is the most comfortable heating method, the indoor surface temperature is uniform, and the room temperature gradually decreases from bottom to top, giving people a good feeling of warm feet and cold heads; It is not easy to cause polluted air convection, and the indoor air is clean; Improves blood circulation and boosts metabolism.

Space-saving: The radiator and its branch pipe are eliminated indoors, increasing the usable area, which is convenient for decoration and home layout.

One is to directly lay a heating wire on the kang (similar to an electric blanket), the other is to use electricity to boil water, and then pass to the kang (similar to floor heating), the former heats up quickly, plug and play, the cost is lower, and I personally think the former is higher.

There is no harm in using an electric hot plate on the kang. Low-temperature radiant heating film is a kind of translucent polyester film that can generate heat after being energized, which is a special heating product made of conductive special ink and metal current-carrying strip through printing and hot pressing between two layers of insulating polyester film. Low-temperature radiant electric heating film heating is a kind of electric radiant heating method.

With electricity as the energy source and the electric heating film as the heating element, most of the heat is sent into the room in the form of radiation to heat up the walls and furniture, and then the indoor air is heated by convection heat exchange, and the independent temperature control device makes it have the characteristics of constant temperature adjustability, economy and comfort. Can be installed in a ceiling, in a wall skirt or under the floor.

Just like the flowers in the greenhouse, if you use the hot plate kang for a long time, you will find that the weather will get colder and colder. Moderate use is better.

The reactance is generally made of carbon fiber electric heating plate, which has very good thermal conductivity, and is not afraid of water, and is very safe against corrosion, because his income is also relatively low, so it is also liked by many people. Then lay a layer of wooden planks on this board, the thermal conductivity of the wooden board is also very good, and it is also very comfortable, and it looks very tall. In addition, there are some rural areas, maybe their kang is made of cement, and the thermal conductive plate on it is also a thin cement board, the thermal conductivity is not particularly good, and the income is not very even.

Answer the advantages of electric heating kang: first, the plumbing kang can completely ignore the threat of leakage, as well as the radiation of electromagnetic waves to the human body, and will not produce the harm caused by the use of electric kang, nor will it produce adverse reactions such as dry mouth and dry tongue; The second is that the plumbing kang helps the user's sleep, because the plumbing kang is made by using the principle of heat external application in traditional Chinese medicine, and has a non-medicinal physiotherapy and health care effect; Third, the installation of plumbing kang is relatively convenient, and it is also very economical in terms of electricity.