Bayonet traffic light, bayonet device The difference between electronic police and speeding equipmen

Bayonet traffic light refers to the signal light group set on the opposite side of the road, and its sequence is from top to bottom for motor vehicle signal lights, non-motor vehicle signal lights, and pedestrian crossing signal lights. In general, the colors of motor vehicle signal lights, non-motor vehicle signal lights, and pedestrian crossing signal lights are red, yellow, and green. Most bayonet traffic lights are in the form of countdowns, which indicate that the red light is about to turn on by means of countdown, which can effectively relieve traffic pressure.

The electronic police for running red lights are generally used in places with traffic lights at intersections to capture some vehicles that do not follow the rules;

The bayonet is divided into a security bayonet and a speed measurement bayonet. Public security and traffic police are equipped with such a card point, that is, each lane needs to have a buried coil (some use radar).It will be triggered whenever a vehicle passes by.

The software then analyzes the vehicle to obtain some information about the vehicle, such as the license plate and the direction and speed of the vehicle. Wait a minute!

The bayonet equipment is a license plate recognition equipment installed at the main entrances and exits of Guangzhou City, with license plate recognition and speed measurement functions, and the current recognition rate is generally required to be more than 95%.

The velocimetric electronic eye has a velocimetric function, while the ordinary one does not.

1. Similarities: They all process license plate numbers through images, and from the perspective of violations, there must be illegal videos.

2. Differences:

1. Different placements:

Electronic police are placed at intersections, bayonets are placed 200 meters away from intersections, and surveillance is everywhere.

2. The range that can be photographed is different

The electronic police only process the violation data at the intersection, and can only see the rear of the car when taking pictures, and the bayonet generally has the function of dealing with speeding, taking pictures of the front of the car, and even the faces inside are very clear to see, monitoring and processing violations rely on manual sorting, as long as the violation can be proven, it is a violation video, ** are taken.

3. Different functions:

The bayonet is based on the camera set up at the intersection of the main transportation hub, combined with intelligent instruments and software to realize the intelligent control of road traffic, such as the current traffic flow, the vehicle count on the section surface, the vehicle feature retrieval, and some violations capture function.

The electronic police is somewhat similar to the bayonet, but its main function is the real-time supervision of road vehicles, and the analysis and capture ability of chasing vehicles, accident vehicles and suspicious vehicles is stronger, and it needs to be networked with the public security department.

The surveillance is only for video recording, and you can see the real-time road conditions.

The bayonet is to shoot the front of the car, in the road section, you can take pictures of the vehicle, and identify the vehicle number plate, and some have a speed measurement function.

Electronic police, that is, running red lights, is located at the intersection, where there is a traffic light, through the software, and sensors, detect the vehicle at the red light, shoot and record**.

The electronic police are fined for violations, and the bayonet is used to control and count vehicles.

1. The monitoring is only for video recording, and you can see the real-time road conditions.

2. The bayonet is a picture of the vehicle's condition, and the situation in the cab can be clearly seen, which is the main basis for the traffic police to punish the vehicle for speeding, not reaching the seat belt, smoking, and playing mobile phones.

3. The electronic police are shooting behind the car, mainly filming illegal behaviors such as vehicles running red lights, pressing lines, and not driving according to the guide lane.

You can learn about Sanwang Communication's industrial switches, which are used for electronic police, bayonet and other systems.

People generally do not know how to distinguish between these, but refer to these electronic traffic monitoring facilities as electronic police.

In the professional field, electronic police generally refer to red light running and capturing.

Therefore, the electronic police are installed at intersections with traffic signal indications, and are linked with traffic signals to capture violations.

A bayonet is an entrance and exit from the outskirts of a city into and out of an urban area. The systems installed in these locations to monitor traffic conditions are for bayonet monitoring. Bayonet monitoring is a system with a high degree of functional integration, mainly including:

license plate recognition, speeding capture, illegal vehicle capture, etc.; On the basis of the license plate recognition function, it is also extended that by comparing the identified license plate number with the vehicle management database, the current status of the vehicle can be investigated, and the information such as illegal and unprocessed, unreviewed or scrapped can be reported in time.

Fixed speed monitoring devices are mostly installed along highways and some sections that require speed limits, and their function is to monitor and capture vehicles that exceed the speed limit.

Electronic police (refers to red light capture, the same below) and fixed speed measurement its principle is basically the same, one application is the principle of electromagnetic induction, the use of ground induction coil to trigger capture, the other is the use of ** motion detection technology to trigger capture.

What's different is the trigger mechanism:

The electronic police is to install an inductive coil in front of and behind the parking line of the intersection lane.

electromagnetic induction mode) or in the monitoring screen in the intersection stop line before and after each set up a virtual detection area (motion detection mode), when the lane direction of travel on the red light, capture system preparation, vehicle through the front and rear of the stop line coil (or detection area) respectively capture a **, to confirm that the vehicle through the stop line before and after the signal is red light, thereby constituting a penalty basis.

The speed measurement device is to install a ground sensing coil (or set a virtual detection area) at two positions at a pre-set fixed distance, calculate the vehicle speed according to the time when the vehicle passes through the two coils, and capture and record the current speed of the vehicle if the speed limit is exceeded, and do not capture if the speed limit is not exceeded.

All three types of traffic surveillance devices are fixed-mounted bullet cameras and most require auxiliary lighting (spotlights, white lights or flashing lights).

Traffic monitoring facilities generally use cameras with PTZ, and most of them are installed in higher positions, in order to expand the monitoring area, and its role is only used to monitor the traffic conditions of the public section in real time, provide timely information for the traffic police to ease traffic congestion, and do not have the function of illegal records.

device, just park such a vehicle on the side of the road, turn on the system, you can speed the passing vehicles, and this device is not necessarily installed on the roof of the car, many are hidden in the car, it is impossible to prevent it, the majority of riders are more cautious, not only to be less punished for violating the law, safe driving, driving according to the law is very important!!

You don't need any major, if you have to say anything, it's a public safety major. In fact, the job you said doesn't require academic qualifications, nor does it require certificates, most of them are high school students and junior high school students doing this, and people are related to these jobs and go through the back door! Thank you.

There are two kinds of this kind of thing, one is for surveillance, recording images, the same as ordinary cameras, such lights will not flash, if it is with infrared night vision, it can be seen clearly at night, if there is no night vision function, it is not clear that there are no lights around at night. The other is to flash the lights of a car, this is called the security bayonet, every time you pass a car take a ** and save it, so you can also count, record the traffic flow, and run the red light is this kind of photograph. If this type does not flash, it is not clear at night, and if it does not flash, it means that it is broken.

Some security monitors that don't need flashing lights will also take pictures of your violations

This can be photographed at both traffic lights and lane changes on solid lines. I can shoot it at night, too.

The camera of the party, it is possible that it is an electronic police.

This kind of camera is generally installed at the intersection, and generally captures the rear of the car to monitor the illegal behaviors such as the vehicle running a red light, not following the guide, changing lanes illegally, pressing the line, driving in the wrong direction, and the motor vehicle occupying the non-motorized lane, and it does not have any prompt when capturing the violation.

It may also be a bayonet (electronic capture) system.

This type of camera is generally installed on national highways, provincial highways, and highway sections to capture behaviors such as speeding, and it is a frontal capture, which can clearly see people's faces.

The round camera may be a traffic surveillance camera.

These cameras are usually mounted on electronic police poles or signal poles.

It is mainly to count the traffic flow and provide data support for signal control (some intersection signal lights are released according to the traffic flow, and when the traffic camera detects that there is a car passing by, the traffic light will be ordered to turn on the green light).

The traffic camera does not capture any illegal acts, it is only used for traffic statistics, so it is also the safest camera.

Or it's an illegal stop to capture the camera.

This kind of camera is spherical, mainly installed in the urban area where parking is prohibited and the highway has passenger cars illegally picked up and dropped off passengers, its role is to capture illegal parking, but also can capture the wrong way, illegal lane changes, etc. It's worth noting that this type of camera can zoom and can generally see at least 200 meters.

These cameras are different and useful, but they can be configured differently in each city and region, and are basically divided into the following categories:

Category 1: Overspeed cameras.

Most of the speeding cameras are installed on national highways, highways and accident-prone road sections, and they are generally installed on the shelves, which are easy to recognize with the naked eye, but some high-speed sections, these cameras will be installed under the viaduct, which is not easy to identify, so friends who often take high-speed roads, slow down in advance when crossing the bridge hole, and observe more, it is captured from the front, and the appearance of the driver can be seen.

This type of camera generally consists of two parts, including a radar machine and a camera (including flash). When it's snapping, the flash will turn on. If the flash light is on twice, then it means that the vehicle is speeding.

Under normal circumstances, there will be no penalty for exceeding the speed limit of the road section within 10%.

The second category: e-police.

The electronic police are installed at intersections to capture behaviors such as running red lights, pressing lines, driving in the wrong direction, occupying non-motorized lanes, driving not according to the guide, and changing lanes in violation of regulations.

This type of camera is paired with a fill light, and LED bulbs are currently mostly used. Fill lights are usually not lit during the day and only flash at high frequency at night.

The third category: illegal stop capture.

The illegal parking capture camera is generally spherical, mainly to capture illegal parking behaviors on the prohibited road sections in the urban area, and can also capture violations such as wrong-way driving and illegal lane changes. The camera is zoom and can see up to 200 meters.

Category 4: Traffic flow monitoring.

This type of camera is usually installed on the pole of the electronic police or on the signal pole. Its main role is to count the current traffic flow of the road, and this type of camera does not capture traffic violations.

Category 5: Skynet monitoring.

This type of camera is an ordinary surveillance camera and does not have a capture function. It is mainly used for public security organs to call up surveillance video inquiries and monitor the whereabouts of criminals. There are some cameras of this type that have a zoom function.

Of course, there is a difference, and the garden is based on the surroundings.

The round one is the security probe, and the square one will shoot the violation.

Deliberately covering the license plate is fined 5,000 and 12 points are deducted. It's common sense. You won't be penalized just because you only cover the front card. Generally, the electronic eye that covers the license plate will not take pictures, because he can't find the specific illegal vehicles, and most of them are found by the traffic police on the spot.

And then? I'm in the same situation as you now. Ask for help.

On the shelf at the intersection. Or don't break in casually, safety is the most important thing, big brother.

Behind the car, the first person who runs the red light to collect evidence will be photographed at the rear of the car, and the head of the car will be photographed for speeding violations at the bayonet.