How to assemble the 53C3 movement into the bus

Press and hold the display button for more than 5 seconds

7. CPU: M37160M8-053FP CPU: M37160M8-058FP Decoding:

m61264 61260 61266 press the remote control menu button, press the remote control number key before the screen menu disappears, then press v+ to select the menu of the fiber banquet land adjustment station, then press the channel - select fine-tuning, press v+, press the number 0-9 or press the static and destroy the tone key to turn the page, Xiangqiao repeats the menu, 4863 exits the bus.

CPU: M37160M8-053FP CPU: M37160M8-058FP Decoding: M61264 61260 61266 Press the remote control menu key;

Press the number key of the remote control before the screen menu disappears, and then press V+ to select the console menu;

Then press the channel - select Bridge God Fine-tuning, press V+;

Press the numbers 0-9 or press the mute key to turn the page, Min Brigade loses to repeat the menu, 4863 exits the town shirt bus.

Sanyo movement such as LC863324, LC863328, LC863524, LC863328, etc., 1. This kind of assembly machine almost has small holes or hidden buttons on the remote control, and pressing these keys can directly enter the bus. 2. Press the menu button repeatedly, find the option of "Program Alternate", and enter the password 2483 or 6483. 3. Press and hold the panel "Menu", and enter 628 in the remote control at the same time.

Factory Menu 009 "product"Set "OFF" to exit the B5 remote control: first reduce the volume to 0, press the menu button, and enter 1688 when the OSD appears

Repeat the operation to enter different menus L7 remote control: Volume down to 00, press "Recall" again, then press "Volume -" on the panel, and then press "Recall".

Repeat the operation to enter different menus. The machine also has a child lock function, press "disp.""button for 4 seconds. The above two types of remote controls for CPUs can replace most of the remote controls KD29:

For TVs with this remote control, press the menu key to display boxes one by one on the screen 55L p J2:For TVs with this remote control, press the menu key to display the drop-down menus one by one on the screen.

Caliber No. 5Y29 Memory Data Exchange or Purchase Microprocessor Chip LC863328A-5Y29 Small Signal Processing Chip LA76810A Memory Model Model Factory Mode User Mode Access Method 1Press the sound button of the machine to 0 first, then press the display key on the remote control, press the sound key of the machine to 0, and then press the 0 button on the remote control three times; 2.Press the replay button on the remote control once, then press the volume down button on the TV and don't let go, and press the replay button on the remote control at the same time, you can enter the factory state, repeat the above process to enter such as black and white balance and so on.

Press the Menu key to tune to the Program Swap inputPress the "Volume" button on the panel of the unit to reduce to "0" and do not let go, and press the "Program" button on the remote control at the same time and then press the number button again to enter. But this can only adjust the field width, line center, sub-brightness, and sub-contrast.

However, this does not allow the adjustment of RGB, etc. If you need to adjust the RGB, use the hidden button in the remote control to adjust the RGB. Turn on the remote control to see if there are any hidden buttons inside, and try them one by one.

There should be a key that can be used. Today's miscellaneous machines are almost all adjusted in this way. 4.

The mantissa of the CPU is 5Y29 motherboard, and the remote control model is KD-29, and the button to enter the bus debugging is below the sleep button of the remote control, uncover the silver-white sticker, and use a smaller screwdriver to tap the small hole below the sleep button to enter the bus menu directly. Adjustment method and data Use volume + or - to select 00-13 major items, and use program + or - key to select each item in the major items. Then use the volume + or - to adjust the value you need.

Exit method: Press the menu key to exit.

There is an instruction manual in the kit you bought, so read the wine carefully and know

Generally, when the remote control board is opened, there will be a button to enter the bus adjustment, and the unclear options after entering should not be adjusted.

1. After the remote control presses the menu button, the OSD menu is displayed, and then 6480 is pressed, and it can be completed within 3 seconds to enter the bus.

2. After pressing the menu button on the remote control, the OSD menu will be displayed, and then press 6087, and it will be completed within 3 seconds to enter the bus.

3. After the remote control presses the menu button, the OSD menu is displayed, and then press 5451, and the bus can be entered within 3 seconds.

4. After the remote control presses the menu button, the OSD menu is displayed, and then 3867 is pressed, and the bus can be entered within 3 seconds.

5. Rainbow Star Board miscellaneous LCD into the bus, press the menu, and then press 9527, and it can be completed within 3 seconds to enter the bus.

6. Lehua board is to press the menu key 1147 to enter the bus.

7. Dingke 6M48 bus entry method: signal source +1973 or press the signal source, and then press 2580 to enter.

8. Set the balance item to 0 under the volume menu, and then press 1-9-6-9 in order to enter the bus.