Can the automatic screw locking machine realize the locking of two screws in one product?

Definitely yes, both kinds of screws are loaded at the same time and locked separately.

Requirements for screws and screwing products of automatic screw locking machine:

1. The ratio of the length of the screw head d to the screw pattern: l d + unit: mm2, there is no obstacle within 10mm around the screw hole, and the obstacle cannot be too high.

3. The surface of the screw hole is flat or an inclined plane less than 30 degrees.

4. The depth of the counterbore does not exceed 40mm.

Applicable products: keyboards, switches, sockets, routers, chargers, calculators, remote controls, plastic products, plastic toys and other screw-intensive products.

Functions of automatic lock screw machine:

1. Automatic screw arrangement, feeding, automatic screening of special-shaped screws, and automatic replenishment of empty materials;

2. Do not take the screws by hand, the screws are automatically fed, liberating the left hand, and the products can be picked and placed;

3. The efficiency is as high as 60 grains per minute, and it can be locked as fast as it can;

4. Strong versatility, hand-held screwdriver, flexible operation, suitable for non-fixed-point operations;

5. The electric batch sleeve is lightweight, and the torque adjustment is accurate and convenient to ensure the locking quality;

6. The shape is small, the conveying distance can reach 4 meters, and the machine can be placed on and off the workbench to save space;

7.One-handed locking operation, easy pressure electric batch can complete the locking screw operation;

8.The screw supply is fast and reliable, and the locking operation can be carried out in any direction;

9. Safe and noiseless;

10. LCD screen, counting and alarm functions.

Summary. Yes, the self-locking function can be realized after the screw tapping, which can effectively prevent the screw from loosening or loosening.

Is there still a self-locking function after screw tapping?

Does the thread on the screw still have a self-locking function after being tapped?

Yes, the self-locking function can be realized after the screw tapping, which can effectively prevent the screw from loosening or loosening.

Thread self-locking means that the threaded connection does not automatically loosen when the static load and operating temperature change little. Self-locking condition: the thread lifting angle is less than the equivalent friction angle of the spiral pair.

The use of this kind of screw does not need to be tapped in the hole, and can be directly screwed into the hole of drilling, punching or die-casting; The triangular geometry is very effective for the formation of uncut internal threads, and the different lengths of thread forming areas maximize the load bearing capacity of the thread surface and make it easy to position. In addition, low thread self-tapping torque, high vibration resistance, and non-cutting self-tapping threading are all characteristics of this taptite 2000 screw that are superior to other screws.

This screw is originally equipped with a self-locking function, and will it still have a self-locking function after being public and private?

Yes. There's also a self-locking feature, right? Yes.

Automatic screw locking machine is currently a kind of equipment used more in our production and life, gasoline is called automatic locking screw machine, automatic screwing machine, automatic screwing machine, etc., handheld is a machine that needs to be operated quietly by hand. Its operation is very convenient, and the whole process is relatively flexible and convenient. This article will give you a brief introduction to its advantages and disadvantages and how to maintain it!

First, the advantages. The hand-held automatic screw locking machine completes the integration of feeding and locking, and there is no need to take the screws by hand. To a large extent, the production efficiency is improved and the labor cost is saved; As long as you directly align the screw hole, gently press the screw to lock, no repeated feeding phenomenon, lock one grain to one grain, convenient and fast; The key components are made of high-quality alloy steel and undergo special heat treatment, and the product performance is stable; Non-professionals can also quickly learn to operate, so as to realize the efficient operation of the enterprise's raw tan's slag production without delaying the production of the enterprise.

Second, the shortcomings. When the hand-held type is used, there are some inconvenient times, that is, whether the screws are locked or not still need us to judge manually, and the quality is difficult to be effectively guaranteed, and the alignment of the screw holes needs to rely entirely on manual work, which is easy to cause the problem of lock deviation, lock crookedness, slippage, and damage to the appearance of the product; Its locking tool is heavier than ordinary electric batch, the operation is more laborious than ordinary tools, and the proficiency of workers is different, and the use effect is also different.

3. Maintenance.

When we use it, we should keep the machine clean and clean, use it under the condition of ventilation and dryness, do not have scraps and other tools in use, check frequently, prevent rodents from infestation, trachea wires, affect future use, when not in use, use a cloth with oil as much as possible to wipe, as little water as possible. Regularly plug in and ventilate, check the performance, if there is any use problem or need to be repaired, please timely manufacturer, do not disassemble and assemble by yourself.

The requirements of the automatic screw locking machine for screws, ORIX will explain to you:

1. The length and specifications of the screw, the total length of the screw must be greater than the length of the straight diameter of the screw cap.

2. Whether there is a gasket, if the screw has a gasket, and the gasket is larger than the screw cap, then the diameter of the gasket shall prevail, so that it will not be flipped in the feeding pipe. If the total length of the screw must be greater than the length of the straight diameter of the screw cap, then the feeding method should be adsorption or other methods.

3. The thread of the screw, the thread of the screw is not the same, there is a triangular tooth self-tapping locking screw, which is consistent with the pitch and angle of the metric thread, but the cross-section is a triangle, with D, C value 2 control locking parameters, can achieve the locking function.

The automatic screw locking machine and the automatic locking screw machine are the same, they are all automatically fed through the set program to automatically lock the product, and the Pulse screw machine can also detect the lock in the automatic locking process to reduce the product defect rate. The characteristics of the automatic locking screw machine are:

1: Fully automatic feeding, improve work efficiency.

2: Self-lock the product by setting the program to save labor.

3: Real-time detection, detection through signal feedback, timely prompt alarm for the problem place, reduce the production defect rate.

4: According to the product and production needs, single or double head can be used for locking or single Y or double Y

The requirements for screws of the moving lock screw machine are as follows:

1. Screw length and specifications. The total length of the screw must be greater than the length of the screw cap, and the depth of the screw hole must not exceed 40mm. When working, be sure to check whether there are obstacles around the 10mm of the screw holes, because the obstacles will definitely affect the operation in production.

In addition, the surface of the screw hole must be an inclined plane with a flat surface of less than 30 degrees.

2. Whether it has a gasket. If the screw has a gasket and the gasket is larger than the screw cap, then the diameter of the gasket should prevail, so that it will not be flipped in the feeding pipe. If the screw does not reach the total length of the screw more than the screw cap warp, then the feeding method should take adsorption or other methods.

3. The thread of the screw. The thread of the screw is not the same, there is a triangular tapping locking screw, which is consistent with the pitch and angle of the metric thread, but the cross-section is a triangle, and there are two parameters of D and C value to control the locking. The locking function can be achieved.

There are basically four feeding methods on the market:

Clause. 1. Blowing type.

Clause. Second, the absorption type.

Clause. 3. Magnetic type.

Clause. Fourth, the vibrating plate feeding.

Weigao automatic screw locking machine manufacturers basically choose the most suitable feeding method according to each manufacturer's products and screws, because each screw feeding method is different.

This kind of automatic screw locking machine looks at the metal with magnets to attract the screws.