How to make a lantern out of waste, how to make a lantern out of waste

Updated on technology 2024-03-10
12 answers
  1. Anonymous users2024-02-06

    Use the old red envelopes left over from the family, and the steps are as follows:

    1. Prepare six red envelopes.

    2. Take one of them and select the median line on the top and bottom and left and right sides on the red envelope.

    3. Connect the midpoint of the upper and lower sides with the midpoint of the left and right sides, fold the four corners into imprints, and turn the rectangular red envelope into a diamond shape.

    4. Take the remaining four red envelopes and fold them according to the steps above.

    5. Connect the five stacked red envelopes together with a stapler by pressing nails on the adjacent vertical edges and the upper and lower edges.

    6. Cut the remaining red envelopes into pieces and hang them with red ropes, sort out the shape of the ordered red envelopes, string them with red ropes, and a lantern is ready.

  2. Anonymous users2024-02-05

    Handmade lantern making**Tutorial Step 1:

    Preparation materials: 2 pieces of cardboard (or calendar paper) with patterns (A4), 1 piece of cardboard (or sales office promotional color page) (A4), 2 baby puff powder box covers, scissors, scale, straw (bubble tea), pens, wallpaper knives, transparent tape, double-sided tape, thin red string, and 1 one-yuan coin.

    The second step of the handmade lantern making method: glue the cardboard into a cylinder, and then glue the patterned paper to the surface of the cylinder.

    Step 3 of making a handmade lantern: draw an equidistant vertical line on the back of the patterned paper with a pen, and draw a horizontal line on the top and bottom.

    How to make children's handmade lanterns Step 4: Use a wallpaper knife to cut the paper along the vertical line.

    How to make lanterns by hand for children Step 5: Glue the drawn diagram to the cylinder.

    Step 6 of the handmade lantern jam tutorial: Finally, close the upper and lower lids, and hang the string and straw.

    Well, a lantern is made.

  3. Anonymous users2024-02-04

    Plastic bottle caps can also be used to make small lanterns, do you know this trick? It's beautiful.

  4. Anonymous users2024-02-03

    A piece of hard A4 paper, after folding in half, divide him into equal strips, do not cut each end to leave 3 5cm, cut directly in the middle of the fold.

    When done, glue both ends directly to the small can of Cobico fries with double-sided tape.

    Then make a small flower spike. Look at my QQ space has done a good job**My children like it very much, and it is very easy and simple to do.

  5. Anonymous users2024-02-02

    Big Coke (or orange juice) bottles, batteries, light bulbs, needless to say you should know how to do it!

  6. Anonymous users2024-02-01

    Creative Life teaches you how to DIY a mini lantern with confetti and cardboard.

  7. Anonymous users2024-01-31

    (1) Steps to make lanterns from waste items:

    1. Find a non-rusty iron can, remove the label, and then clean it.

    2. Load up some soil.

    3. Pour in an appropriate amount of water.

    4. Put it in the refrigerator and freeze it.

    5. Take it out when it freezes.

    6. Stick a leaf on the tin can.

    7. Fix one position with iron nails, and then nail other positions to determine the shape along the veins of the leaves.

    8. Spray paint, fill with clay and put candles.

    9. Light the candle and you're done.

    (2) The significance of lanterns in China:

    Chinese lanterns are also collectively known as lanterns. Lanterns originated in the Western Han Dynasty more than 1,800 years ago, in fact, in the past, people with conditions would hang lanterns, but red lanterns are usually replaced during the Spring Festival and Yuan Festival. Lanterns are closely connected to Chinese life, and there are lanterns everywhere in temples and living rooms.

    People hang red lanterns, which symbolize the meaning of reunion, to create a festive atmosphere. Later, the red lantern became a symbol of Chinese festivities.

    Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the types: palace lamps, yarn lamps, chandeliers and so on.

    In terms of modeling, there are characters, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy. Chinese lanterns are a combination of painting art, paper-cutting, paper tieing, stitching and other crafts, using bamboo, wood, rattan, wheat straw, animal horns, metal, silk and other materials produced in various regions.

  8. Anonymous users2024-01-30

    The steps for making lanterns from waste items are as follows:Material preparation: yogurt bottle, foam glue, cardboard, pen, colored paper, 502 glue, scissors, string, coins, straws and double-sided tape.

    1. Wash the yogurt bottle and dry the water.

    2. Paste and fix them one by one with foam glue.

    3. Find a piece of cardboard, place it according to the Yalido bottle, and draw the position with a pen.

    4. You need to cut two cardboards of the same size, and make a hole after cutting.

    5. Make the bottom tassel.

    6. Take out the red colored paper, cut it with scissors, do not cut the top, and string a rope.

    7. The tassel passes through the jammed paper.

    8. Then glue the bottom of the yogurt bottle to the cardboard with 502 glue.

    9. Draw five small circles with coins and glue them with double-sided tape.

    10. Wear the rope first, then paste the top of the yogurt bottle with 502 glue to another piece of cardboard, and then paste the small decoration with double-sided tape, and find a straw to tie the rope.

  9. Anonymous users2024-01-29

    Materials: disposable chopsticks, red envelopes, scissors, glue guns, red strings, tassels, bottle caps.

    Steps: 1. Prepare four red envelopes, cut out the length and width you want (you can also use cardboard instead of red envelopes), the red envelopes I use are about 17 cm long and about cm wide, and the red envelopes or cards are best hard cardboard, soft ones are easy to break, as shown below

    2. Prepare some disposable chopsticks, according to the width and length of the red envelope to break the chopsticks, 4 long ones are about 1 cm shorter than the length of the red envelope, 8 short ones are almost equal to the width of the red envelope, and then make two slightly longer than the short ones, and put them in the middle of the bottom, as shown below

    3. Then use a glue gun to glue the chopsticks into a rectangle according to the following steps, no glue gun with tape or glue, you can also tie it with a rope to make a frame, as shown below

    4. Then stick the two medium-length chopsticks at the bottom of the whole, and then stick a bottle cap in the middle (so that it is convenient to fix the candle), as shown below

    5. In this way, even if the shape of the lantern is completed, then glue the red envelope on all sides, remember to keep the direction of the red envelope consistent, which will look better, as shown below

    6. Finally, add tassels to the bottom of the lantern, the tassels are rolled together with red cardboard, cut into thin strips with scissors at the bottom, wrapped with yellow cardboard on the top, and then glued to the bottom of the lantern, and add a rope on the top of the lantern, so that the lantern is completed.

  10. Anonymous users2024-01-28

    The cardboard box is striped and hollowed out, take some thread to decorate it according to the real lantern, and then take an old small flashlight and put it in.

  11. Anonymous users2024-01-27

    When the Chinese New Year is coming, many people will hang some ornaments in their homes to add to the festive atmosphere. In fact, sometimes it is better to make one yourself, isn't the atmosphere? Take lanterns, for example. Two disposable paper cups can be made into a small lantern, follow me to make it.

    Method: 1. Prepare several paper cups, red ribbons, double-sided tape and scissors.

    2. Cut a paper cup into shredded paper strips starting from the mouth of the cup, and count how many paper strips there are. When cutting, leave a certain distance between the bottom of the cup, about one centimeter, and do not cut through.

    3. Cut the bottom of another paper cup from a distance of one centimeter, and also cut it into broken strips, and the number of strips should be the same as the previous one. And thread a red thread through the bottom of this cup.

    4. Glue the broken strips of two paper cups together with double-sided tape, and a lantern will have a rough scale.

    5. Use the remaining paper cups, cut them into thin strips of paper, tie them together and stick them to the bottom of the lantern.

    6. Wrap the top and bottom of the lantern around with ribbons, and then make the lantern whole. Then tie the red thread at the top of the lantern to a small wooden stick or chopsticks, and the lantern is ready.

  12. Anonymous users2024-01-26

    Wanglaoji cans handmade creative lanterns.

    Material required: Cans.

    Specific steps: 1. Prepare an empty can.

    2. Grind off the lid of the bottle.

    3. Find a ruler and knife, and first preliminarily locate the position to be cut.

    4. After drawing and cutting lines around the bottle body, you can cut the original positioning lines one by one.

    5. After cutting, press the bottle into the shape of a lantern.

    6. The lantern is finished.

Related questions
7 answers2024-03-10

As soon as the Lantern Festival arrives, the lanterns are popular. If you have some free time, it's also a good idea to make your own lanterns. If you can't make the "big guys" sold on the street, and you can't find any materials such as steel wires and steel plates, then use bamboo strips, rice paper, pen and ink to make a simple paper lantern. >>>More

15 answers2024-03-10

Fresh, delicious, tempting, red, green, tender, watery, fresh, delicate, crisp, refreshing, fresh, verdant. >>>More

14 answers2024-03-10

Cl2 is produced by electrolysis of table saline

Production principle: After the electrolysis of salt water, hydrogen, chlorine and sodium hydroxide are produced, and sodium chloride and sodium hypochlorite are further reacted to produce disinfection, bleaching and other functions. Namely: >>>More

7 answers2024-03-10

For this, first of all, you have to be able to use macros, otherwise you have to be able to write VBA. >>>More

4 answers2024-03-10

Passing the CFA in one month is a bit difficult and requires a solid economic foundation. >>>More