How to make a natural handmade soap?

Sodium hydroxide is made into lye with purified water, and the formula is heated to 50. Mix and stir for 10 minutes, let stand for 5 minutes, and repeat the process until oil-water separation occurs. Soap for another 10 minutes, add additives after saponification through water and then enter the mold to complete, and the soap can be used after half a month.

Prepare all the ingredients, put 250 grams of soap base (usually a pack, strip-shaped), pour it into the measuring cup, at this time, if you want to make breast milk soap, please start your performance, pour 200 grams of milk, pour it into the measuring cup with soap base, and then put the measuring cup with soap base (breast milk plus soap base) into the boiling water induction cooker, if it is plastic, it should be separated from the water, if it is glass, you can put the whole cup directly into the water. Then wait until it's all melted into liquid, then take it out. Add the base oil (the common base oil is palm oil, coconut oil), stir thoroughly, and then add your favorite flavor (Benlu's favorite flavor is peach flavor and creamy flavor) and coloring (remember:

Don't add too much pigment, one or two drops are fine, but the flavor must be squeezed to death) anyway, according to personal preference. Stir thoroughly. Then use a silicone cutter to cut the bubbles away, and if you make a liquid without bubbles, then you are very careful.

Cut off the bubbles, add the foaming agent (as you like), stir again, and continue to cut the foam!

Once you have prepared the relevant materials and utensils, you can start making your own soap. At present, the production methods of handmade soap include cold method, hot method, regenerated soap method, liquid soap method, melting and remaking method. There are different ways to make handmade soap, and the soap products that are mainly made by cold method are sold on the market.

First, make a lye solution from sodium hydroxide and purified water, and heat the other ingredients to 50 °C. Stir for 10 minutes, let stand for 5 minutes, and repeat the process until oil-water separation occurs. Soap for another 10 minutes, add other ingredients after saponification through water and then enter the mold to complete, and the soap can be used after half a month.

Effect: This formula does not add any essential oils and extracts, and is very mild in nature, effectively improving roughness and peeling.

First, what are the recipes and secret recipes for homemade soap? Special tools and raw materials: soap abrasives, electronic scales, water, raw materials for making soap, watches, pens, utensils.

Solid sodium hydroxide solution. Remove the small steel pot prepared in advance and collect water according to the weight of the water in the secret recipe. The best water for making handmade soap is pure water, if there is no pure water, you can replace it with clean tap water after the water filter at home, dry water can not be used for drinking water, pure water, because there are too many residues or minerals in it, it will affect the results of saponification reaction.

The water should be cold or cold, and warm or boiled water should not be used for drying. Method: Place the small steel pot on the electronic scale.

Zeroing out the electronic scale data. Pour the water into a small steel pot until you reach the net weight you want to measure. The weight of the water is recorded in the blank of the secret recipe table, which is convenient for the future as a basis for reflection and improvement.

Zeroing the electronic scale data in case the net weight of the next process is added together, and the role of the electronic scale is missed.

Second, add the solid sodium hydroxide solution to the measured water: take the solid sodium hydroxide solution according to the net weight in the secret recipe, and the solid sodium hydroxide solution must be properly measured and verified, because if there is a slight discrepancy, the soap will be different from each other after application. Although the preparation of sodium hydroxide solution aqueous solution can be done without anxiety, it is best to solve the problem as soon as possible.

If you digest and absorb the moisture in the air and it just starts to become sticky, it will stick to the spoon or paper, which is difficult to solve. Especially in the life of damp and cold climate, the initial amount will immediately digest and absorb the moisture in the body, if you can use the dehumidification effect of the air conditioner in advance to reduce the ambient humidity in the room, then it will be much easier to work. Method:

1) Check whether the electronic scale is zeroed. 2) Use a stainless steel plate soup spoon to pour the sodium hydroxide solution into a small steel pot of Lishan spring water until the net weight is taken. 3) Remove the small steel pot from the electronic scale, and quickly mix the sodium hydroxide solution in the small steel pot with a stainless steel plate spoon to mix it thoroughly with water, and immediately cover the outer lid of the small steel pot and set it aside.

4) Record the net weight of the sodium hydroxide solution in the blank of the secret recipe table, which is convenient for future reflection and improvement. 5) Zeroing out the electronic scale data.