Difference Between Hook and Hook 20, Difference Between Hook and Hook

Personally, I understand that the difference between hook and uppercut is the difference in the face of the punch when punching.

For example, if you hit the head with a left hook and a left hook, the left hook is a horizontal blow with the center of the fist facing downwards.

When the left hook is struck, the fist is hit vertically, and the center of the fist is inward.

But in practice, the hook punch mostly hits the high position, such as the head and cheeks.

In addition to the upper uppercut, the uppercut is mostly a blow to the middle and low positions, such as the ribs and abdomen.

While left and right side hooks can also hit the head and cheeks, fighters are generally less subdivided into that.

This is mainly related to the habits of the fighters who practice at the beginning.

Swing fist (flat hook) is a rotation of the waist force with the rotation of the sole of the foot, swing the elbow at an angle of about 90 degrees, swing inward, like a tiger's claw strike, and quickly retract the fist as a defense.

Uppercut is also a move with the soles of the feet to exert force at the waist, but the most obvious part is that the knees will first turn inward, squat slightly, and when punching, the fist will be struck upwards at the waist, and at the same time, the legs will be pushed up, and the strength of the body will be used to exert force upwards.

In principle, both attack on the part of the index finger and middle finger bone.

Everyone's style of play is different, as far as I am concerned, the hook fist is used with the back of the fist, the hook fist is much more powerful than the hook fist, there are high and low ones, you block me to hit, the power is from the ground, turn the waist.

The angle between the lower arm and the upper arm of the swing fist is generally greater than 90 degrees, and the flat hook basically lifts the arm flat, and the arm is at 90 degrees or less than 90 degrees.

This information is from a boxing textbook.

The seventh lesson of Yuan Qi Xuanwu free fighting fighting, the difference between hook and hook.

Swing boxing: 1. Swing fist includes a large swing and strikes from the side;

2. Swing fists can be used at medium and long distances, and flat hooks can also hit the chain plexus at close range;

3. It is to draw a large arc by swinging the body and pulling out the arm, the heart shed is chaotic and the cherry blossoms are downward, and the angle between the big and small arms is raised up and down at 135 degrees, and it cannot be straightened.

Hook: 1. Hook up and hook down, one hit the chin and the other hit the abdomen, from bottom to top;

2. Most of the hook hole boxing is medium and close range, including the distance of the back hand to the bait.

The difference between an uppercut and an undercut is mainly reflected in the direction of the strike.

1.Uppercut: An uppercut is a punch that attacks the abdomen, ribs and head of the opponent at close range, depending on the opponent's defense. When punching, the elbow joint is downward, and the body is exerting force while quickly bending the arm, and the fist is hooked from the bottom to the top.

2.Downpercut: Downhooks are usually used at close range and target the opponent's groin or neck. When punching, the code ant first tightens the chest and abdomen, and then uses the belt arm, the fist is hidden inward, and the arm is bent or elbowed to hook downward.

In general, the uppercut is an upward punch, while the downpercut is a downward blow to the opponent. Both have different applications and characteristics in boxing techniques.

Location, lethality.

1. Location. Uppercut is mainly used to hit the opponent's hidden lifting inside line, through the middle of the opponent's defensive arm to hit the opponent, and the downpercut is a punch that a relatively tall boxer uses the power characteristics of the uppercut to strike from top to bottom.

2. Lethality. The upper uppercut makes the stove bi used more times and has strong lethality, while the lower uppercut uses less laughter, and the lethality is not as strong as the upper hook.

Hook Punch Head Strike starts with the basic position, rotates the hips and shoulders to the left, then turns the left foot and writes the left fist to quickly hit the opponent's head.

The flat hook starts with a basic stance, kicks the ground with the left foot, turns the body to the right, and quickly hits the opponent's head from left to right with the left fist inward. Quickly return to your basic position after the blow.

Boxing is a sport in which boxing gloves are worn with holes for fighting. The goal of the match is to score more points than the opponent in order to defeat the opponent or finish the match by knocking them out. At the same time, the contestants try to avoid the blows of the opponent.

Boxing is known as the "sport of the brave". There are many accounts of boxing as early as ancient Greek and Roman times. In ancient Olympic Games, boxing was already one of the sports competitions.

By the third edition of the Modern Summer Olympic Games in St. Louis, men's boxing was officially included in the program.

The pure leather judgment of the swing fist is as follows:

1. Swing fist is a punching method that follows the arc from left to right or from right to left: it is generally used for "fighting" at a slightly closer distance, and the target is generally the left and right cheeks of the head.

A hook is a fist in which the arm is bent and raised flat, with the right hand to the left and the left hand to the right, hitting both sides of the enemy's face, that is, the left and right cheeks. Take the right swing fist as an example: standing in a fighting style, kicking the ground with the back foot, turning the waist and hip sharply, driving the right arm to swing out, the fist is downward, and the arc should not be too large, which will affect the speed.

The punch is in an arc, the punch is hidden in a hidden position, the time is short, and it can attack from the side. He also attacks his opponent from the side with his sliding steps and body.

2. Straight boxing is the most basic boxing technique in boxing technology, and it is also the most commonly used boxing method for every excellent boxing athlete.

This punch has more consecutive punches per unit of time than other punches, especially the continuous direct strike of the left straight punch. A straight punch is a striking method that moves in a straight line from the punch to the target. Straight punches are generally used to disrupt the opponent's movements and disrupt the opponent's position when attacking or consciously retreating, and are the main means of winning the victory.

Joseph Brown, a boxing coach at Princeton University in the United States, once said, "Mastering straight punching is equal to mastering 80% of boxing skills." "

3. Hook is a kind of arc punching, and it is a boxing method used as a close attack, and the basic techniques of hook are generally divided into four types.

Flat uppercut, uppercut, side uppercut, and diagonal uppercut. The punches, power methods, footwork and center of gravity of these four hooks are basically the same, but the direction of the blow and the target are different.