Why Hisense TV is turned on as soon as it is turned on, there is no signal and you can t enter the T

The TV picture can't be occupied, and suddenly there is no signal, and there is a picture according to the signal source, and suddenly there is no signal.

1. It may be that the TV is set to standby. At this time, even if the TV is turned on, it will not be able to turn on the TV screen in the standby state.

2. It may be that the signal source of the TV is faulty. The picture of the TV is generally ** than the satellite signal,If the signal reception of the TV is poor or malfunctioning,Hisense TV has no way to enter the TV picture。

Suggested workaround:

1. If the fault is caused by the TV setting standby state, you need to check whether the standby button of the TV is pressed when the TV is turned off, and only the screen of the TV is turned off, but the power of the TV is not completely turned off, causing the TV to enter the standby state. If so, you need to turn off the power of the TV completely, press the power button, and turn the TV back on to normal.

2、If it is because of the reception failure of the TV signal source, Hisense TV cannot enter the TV picture after it is turned on,You need to check whether the set-top box receiving the signal of the TV is normal,If there is no problem with the set-top box,In the setting system of the TV,Select to search for the signal source again,Let the TV re-receive the set-top box signal and use it normally。

You canClick on the link below, or call the official **Make an appointment with a professional master in the same city to come to your door for inspection and maintenance.

Hisense TV shows no signal may be caused by the following reasons:1Source Issues:

If you're using cable or satellite TV, there may be a problem with the source, such as bad weather or faulty signal lines. 2.Signal line problem is localized:

If you're using cable or satellite TV, there may be a problem with the signal line, such as an aging line or a loose connector. 3.Input Source Setup Issues:

If you're using HDMI or another input source, you may not have set up the input source correctly or selected the wrong input source. 4.TV Failure:

If all of the above problems are ruled out, it may be that there is a fault in the TV itself, such as a damaged TV interface or a faulty TV motherboard. It is recommended that Tong Ze take you to check whether the signal source and signal line are normal, and then check whether the input source is set correctly, and finally if the problem cannot be solved, it is recommended to contact the after-sales service center for maintenance.

Here's why:1、The signal source file contains questions,Check whether the connection cable of the TV set-top box or other equipment is loose,If it is loose or wrong position,The TV has no signal or can not open the TV program normally。

2. TV hardware problems, if the TV's plug-in board interface is damaged, or the TV signal receiver appears or, or other hardware damage may cause the TV to have no signal, if it is a pure hardware problem of the TV, you need to go to the TV manufacturer for after-sales maintenance.

3、Smart TV needs to be connected to the network to use,Therefore, when the TV shows no signal, you can check whether there is a problem with the wireless network of the TV,Generally, find the settings from the TV home page、Network settings,Reconnect to the wireless network to see if it can return to normal。 If your TV is connected to a network set-top box, you need to go to the page of the set-top box to reset it, or go to the home page to find the settings and then find the wireless network, and try to reconnect the network.

Kiss! Hello, happy to answer your <>

The reasons why the pro-Hisense TV cannot enter the TV screen after it is turned on are as follows:1、It may just be a TV system startup error,You can turn off the TV by powering it off,After a period of time, turn it on again,It can be restored to normal。 2、If you restart the TV and keep repeating the boot picture,If you know the void, it may be that the TV system has collapsed,You need to contact the after-sales service of the TV to arrange professional and technical personnel to come to the door to brush the new system for the user to solve the problem。

3. In addition, the hardware failure of the TV may also lead to the repetition of the boot screen when the boot is turned on, and the system cannot be entered, such as the internal circuit of the wheel, the power supply voltage is unstable, the processor is burned or the memory is faulty, the motherboard chip or other parts are faulty, etc., and the TV needs to be repaired by contacting the after-sales service of the TV to solve the problem. Hope mine can help you <>

Do you have any other questions?

Hello dear! Possible causes and solutions for Hisense TV no signal:1、The network cable connecting the set-top box(signal cable)The plug is loose or dropped。

Solution: Reconnect the network cable (signal cable) to restore the signal. 2. The router that set up the wireless network is turned off or the wireless is not turned on.

Solution: Ask a professional to replace the network port (signal demodulator). 5. The wireless function of the set-top box is not turned on.

Solution: Turn on the wireless function of the set-top box. Hisense TV has no signal reason。

First, whether the set-top box is connected correctly.

Second, it is a problem with the software signal source line of the TV itself, which may not be compatible.

Third, the line is loose, if the line is not loose, it is a problem to choose the signal source, and you can re-select the signal source!