What should be paid attention to in the use of hydrogen peroxide, pump, valve, pipeline, storage ta

Hydrogen peroxide is a commonly used oxidizing agent, which is widely used in medical, health, environmental protection and other fields. When using hydrogen peroxide, there are a few things to keep in mind:

1.Pump: When using hydrogen peroxide pumps, corrosion-resistant materials should be selected, such as stainless steel, PTFE, etc. The tightness and operating status of the pump should be checked before use to ensure the normal operation of the pump.

2.Valve: Hydrogen peroxide valves should be made of corrosion-resistant materials, such as stainless steel, PTFE, etc. The tightness and operating status of the valve should be checked before use to ensure the normal operation of the valve.

3.Pipes: Corrosion-resistant materials should be selected for hydrogen peroxide pipes, such as stainless steel, PTFE, etc.

The tightness and operating status of the pipeline should be checked before use to ensure the normal operation of the pipeline. In addition, the inside of the pipeline should be cleaned regularly to avoid the accumulation of impurities and dirt inside the pipeline.

4.Storage tank: Hydrogen peroxide storage tank should be made of corrosion-resistant materials, such as stainless steel, PTFE, etc.

The tightness and operating status of the storage tank should be checked before use to ensure the normal operation of the storage tank. In addition, the inside of the storage tank should be cleaned regularly to avoid the accumulation of impurities and dirt inside the storage tank.

In short, when using hydrogen peroxide, it is necessary to choose corrosion-resistant materials, regularly check the tightness and operation status of the equipment, and avoid equipment failures and safety accidents. At the same time, it is also necessary to pay attention to the storage and transportation of hydrogen peroxide to avoid the occurrence of dangerous situations such as hydrogen peroxide leakage and **.

Hydrogen peroxide pump Gu Ming Siyi is used to transport hydrogen peroxide, but many people do not know how to choose the type and material of the pump, as well as the corrosiveness and acidity of the potion, and choose the right hydrogen peroxide pump for everyone by analyzing the properties of hydrogen peroxide.

Hydrogen peroxide, also known as hydrogen peroxide, has the molecular formula H2O2. i.e. one hydrogen peroxide molecule contains two oxygen atoms. Although hydrogen peroxide can be broken down into water (H2O) and oxygen (O2), it is not "highly concentrated oxygen" in hydrogen peroxide.

Hydrogen peroxide is recognized as a low-toxicity substance, and is widely used in industrial bleaching, surgical disinfection and other fields. Industrially produced several specifications of hydrogen peroxide products, such as 35%, 50 percent, and the pump for pumping this concentration with acid and alkali resistant self-priming pump is a wise choice.

The hydrogen peroxide pump is made of FRPP and PVDF material injection molding, which has strong acid and alkali resistance and corrosion resistance, and the applicable temperature is below FRPP-65°C and PVDF-90°C. The unique shaft seal design adopts a self-cooling design, which does not require external cooling. Strong self-priming and a check valve design to prevent the backflow of liquid in the pump.

The above is a specific combing of what pump is used for hydrogen peroxide, as well as the introduction of hydrogen peroxide.

This depends on the temperature, at room temperature, PP and PVDF materials can be acid and alkali resistant, corrosion resistant.

The use of hydrogen peroxide is very corrosive to our ** and mucous membranes. If yours accidentally come into contact with hydrogen peroxide, yours will have a white scab. That's when you use it to clean the wound again, and then you get infected because the gas production is too fast.

Hydrogen peroxide is chemically highly oxidizing. When hydrogen peroxide and pigments begin to work, the colored substances will begin to be oxidized, causing them to slowly fade their original color, and hydrogen peroxide is often used as a bleaching agent. In this way, it can have a good bleaching effect.

1.Disinfect. Hydrogen peroxide is common in our lives.

We often use it for disinfection, especially in hospitals. The main role in the hospital is to disinfect wounds. White bubbles are produced during general disinfection.

This is because it encounters dust, which can also decompose.

2.Bleach. Hydrogen peroxide is chemically highly oxidizing. When hydrogen peroxide and pigments begin to work, the colored substances will begin to be oxidized, causing them to slowly fade their original color, and hydrogen peroxide is often used as a bleaching agent. In this way, it can have a good bleaching effect.

The use of hydrogen peroxide is very corrosive to our ** and mucous membranes. If yours accidentally come into contact with hydrogen peroxide, yours will have a white scab. That's when you use it to clean the wound again, and then you get infected because the gas production is too fast.

1.When using hydrogen peroxide, be careful not to get it into your eyes, **, etc. Otherwise, your ** will hurt, and you won't be able to eat it.

2.If your wound is severe, do not use hydrogen peroxide. It is possible that the wound will be more severe.

3.This pregnant and lactating woman should not be used.

4.He can't see the sun, otherwise it will be very susceptible to deterioration, so keep it in a cool place.

5.When using hydrogen peroxide, you can't use high-concentration hydrogen peroxide, and you can't prepare high-concentration hydrogen peroxide for disinfection.

It can kill intestinal pathogenic bacteria and achieve a good disinfection effect. It needs to be used externally, it is forbidden to use high-concentration drugs, it is forbidden to use it for a long time, you need to wash your hands before use, pay attention to hygiene, and use it within the validity period.

The function of hydrogen peroxide is to disinfect and sterilize, so you must avoid contact with your eyes during the use of it, and use cotton swabs to use this kind of thing.

The function of hydrogen peroxide is to disinfect and sterilize, its purpose is that we can use it to clean after injury, we should be careful not to let it touch our eyes when using hydrogen peroxide.

It has both oxidizing and reducing ......Seeing light is easy to decompose ......

Corrosive, oxidizing.

Do not stick to your hands.

Lucide + hydrogen peroxide tutorial + wear OK glasses when you go to bed at night to restore your naked eye vision during the day.

Temperature prevents deterioration and volatilization.

Concentration should be properly controlled.