The phone is flooded, and the white screen is still flashing

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

If your mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal components due to a short circuit inside the machine (if the machine battery is removable, it is recommended to remove the battery). It is recommended that you bring the machine to the local after-sales service center, and the engineer will help you test, and the specific cost is subject to the test results of the service center.

There are two ways to inquire about phone repairs**:

Way 1Log in to the official website to inquire about the reference benchmark for maintenance costs outside the warranty period and the reference for spare parts**.

Method 2: Consult the service center to understand the repair cost: send the mobile phone to the nearest service center, and the engineer will determine the specific maintenance of the machine according to the product test results**.

If the mobile phone is flooded, it will inevitably cause poor internal contact of the mobile phone and the power supply is not smooth, so it is normal to cause flashing and flashing. However, in fact, the treatment method after the mobile phone enters the water should not be turned on immediately, because it is easy to cause a short circuit in the mobile phone and destroy the mobile phone. Therefore, when the mobile phone enters the water, the mobile phone should be disassembled first, the parts inside should be dried and then assembled, the mobile phone can still be used, but the picture quality of the screen has also decreased a lot.

Summary. What to do if the phone gets into the water, the screen flashes and flashes.

Hello dear, it is best to deal with the phone immediately after it gets into the water, and it must be cleaned up before it can be turned on. If not cleaned, the water will short-circuit and will corrode the parts. If the screen flashes and flashes, see whether the screen display flashes or the backlight flashes, this may be burned to the screen, and some of the light control lines are burned, it is recommended to get a professional maintenance to check it, deal with it, judge the reason, I don't want to help you in looking at the repair!

What to do if the phone gets into the water, the screen flashes and flashes.

What should I do if the phone is flooded, the screen flashes Hello dear, it is best to deal with the phone immediately after it gets into the water, and it must be cleaned up before it can be turned on. If not cleaned, the water will short-circuit and will corrode the parts. If the screen flashes and flashes, see whether the screen display flashes or the backlight flashes, this may be burned to the screen, and some of the light control lines are burned, it is recommended to get a professional maintenance to check it, deal with it, judge the reason, I don't want to help you in looking at the repair!

Hello dear, the screen flickering after water ingress is caused by a short circuit in the motherboard or a burned cable. The workaround is as follows; 1.Go to a nearby mobile phone store to test and repair, 2

Send it to the after-sales point for inspection and maintenance [after-sales is more expensive]. There are three definitions of repair, which are replacement parts, pure repair parts, modification according to function, maintenance and restoration, maintenance, maintenance, and repair. Hope it helps!

If you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Make an appointment for service. Repair Spare Parts**.

Boarding service.

Hello dear, what should I do if the phone is flooded and the screen shakes Steps:1First of all, we immediately salvaged the phone from the water2

Then wipe each part of your phone with a clean, soft rag or paper towel (gently pat your iPhone with your hand to drain excess liquid)3Then hold the phone upright, with the charging port facing down, and use a hair dryer to quickly dry the phone. 4.

After drying, we quickly turned off the phone.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, if the mobile phone is a removable battery, please remove the battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the water by throwing the phone, this operation may cause the liquid stall to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (the moisture inside the mobile phone may penetrate into other components of the screen after being heated into water vapor by the hair dryer and other hot machines, which will cause the mobile phone to be damp and damage the electronic components).