Can Apple tablets insert cards, can Apple tablets install mobile phone cards

There are several versions, and if you buy the ipad wifi version, there is no mobile phone card socket. If it is the WiFi + 3G version, there is a mobile phone socket. The 4G network used by the new iPad at the time of release, because the foreign 4G network has been fully popularized, so the previous iPad3G version is directly called the new iPad 4G version.

However, when the new iPad logged in China, because there was no 4G network in China, the new iPad was divided into two versions, a WiFi version and a WiFi + Cellular version, the latter WiFi + Cellular is actually the new iPad 4G version abroad, which not only supports 3G network but also supports 4G network.

The method of inserting a card is the same as that of a mobile phone, and the specific operation is as follows:

1. Insert the jack pin in the round hole in the lower right corner of the iPad, the jack pin and the iPad Air are in a horizontal line, press the tool firmly and push it down until the bracket pops out.

2. Then put the prepared SIM card into the SIM card tray of the iPad, which can make the 3G4G card of China Telecom or the 3G4G card of China Unicom Mobile. Pay attention to distinguish between the front and back.

3. Start inserting the SIM card into the iPad, with the chip side facing up, and gently push in with ten fingers. The SIM card was successfully inserted.

When you buy a tablet, you have to choose, if you choose a card, you can, the card is hundreds more expensive than the general one.

"Yes, it's the same as the Apple mobile phone card, but many mobile phones can do it, the tablet can't do it, the ipad wifi + cellular version supports the insertion of the mobile phone card, and the ipad wifi version does not support the mobile phone card without a slot (except for the use of apple skin).

The general Apple tablet does not support SIM cards, and can only achieve network functions through WiFi hotspots.

Take Huawei Tablet M3 as an example:

1. When the tablet is turned off, prepare the card pick-up needle that comes with the tablet and find the card tray position;

2. Insert the card pin vertically into the small hole on the edge of the card tray, and press hard to make the card tray pop out;

3. The card slot of the HUAWEI Tablet M3 supports 1 nano-SIM card and 1 microSD card.

4. Put the nano-SIM card and microSD card into the card tray according to the schematic direction, and pay attention to the direction of the notch;

5. Push the card tray back into the card slot with the flat screen up, and you can gently press down on the nano-SIM card or microSD card to prevent the card from being slightly jacked up by the shrapnel in contact during the card insertion process.

6. Finally, press and hold the power button to turn on the computer, and you can use the Huawei tablet M3.

Summary. Hello, how to insert a tablet card into a tablet: 1

When the tablet is turned off, prepare the card pick-up needle that comes with the tablet and find the card tray position; 2.Insert the card pick-up needle vertically into the small hole on the side of the card tray and press hard to make the card tray pop out; 3.The card slot of the HUAWEI Tablet M3 supports 1 nano-SIM card and 1 microSD card. 4.

Put the nano-SIM card and microSD card into the card tray respectively according to the schematic direction, and pay attention to the direction of the notch;

How to insert a tablet card?

Hello, how to insert a tablet card into a tablet: 1When the tablet is turned off, prepare the card pick-up needle that comes with the tablet and find the card tray position; 2.

Insert the card pick-up needle vertically into the small hole on the side of the card tray and press hard to make the card tray pop out; 3.The card slot of the HUAWEI Tablet M3 supports 1 nano-SIM card and 1 microSD card. 4.Put the nano-SIM card and microSD card into the card tray respectively according to the schematic direction, and pay attention to the direction of the notch;

Extended information: A tablet computer, also known as a tablet personal computer (tablet PC), is a small, portable personal computer that uses a touch screen as the basic input device. It has a touchscreen (also known as pen tablet technology) that allows users to work with a stylus or digital pen instead of a traditional keyboard or mouse.

Users can input via built-in handwriting recognition, on-screen soft keyboard, voice recognition, or a real keyboard (if available).

Summary. Hello dear! After the Apple tablet is plugged into the card, the following steps are used to connect the Internet:

The iPad card version is the cellular version, which can not only insert a data card to surf the Internet, but also connect to WiFi to use. Steps to plug in the card to go online: 1. Turn the iPad over and take out the jack pin in the box.

2. Insert the jack pin into the round hole in the lower right corner of the iPad, the jack pin and the iPad Air are in a horizontal line, press and hold the index finger and gently press it inward. 3. The SIM card tray of the iPad comes out. 4. Insert the SIM card into the iPad, with the chip side facing up, and gently push the index finger in.

How to connect to the Internet with a card inserted in the Apple tablet.

Hello dear! After the Apple tablet is plugged into the card, the following steps are used to connect to the Internet: the iPad card version is the cellular version, which can not only insert a data card to surf the Internet, but also connect to WiFi to use.

Steps to plug in the card to go online: 1. Turn the iPad over and take out the jack pin in the box. 2. Insert the jack pin into the round hole in the lower right corner of the iPad, the jack pin and the iPad Air are in a horizontal line, press and hold the index finger and gently press it inward.

3. The SIM card tray of the iPad comes out. 4. Insert the SIM card into the iPad, with the chip side facing up, and gently push the index finger in.

iPad has two ways to access the Internet, one is WiFi, one is similar to mobile phone data traffic, through the plug-in card Internet access 1, WiFi Internet access method, click Settings - WiFi settings 2, connect to the WiFi network, enter the WiFi password, you can access the Internet 3, plug in the card to access the Internet, you need to buy WLAN + Cellular model iPad, to achieve.

Related information: How to connect the tablet to the Internet to the wifi, how to connect the tablet to the wifi, the following shares the ipad mini connection to the wifi setup process 1, enter the settings here in the tablet 2, enter the tablet settings, select wifi here. 3. Then turn on the switch for wifi connection.

4. Select the wifi signal you need to connect. 5. Enter the wifi password and click Join in the upper right corner. 6. Complete the wifi connection and complete the tablet networking settings.