How to set the printing speed of Epson 690k

1. You can operate the "Properties" window of the printer as follows: click Start Menu Printers & Fax to open the printer list window.

2. Find the Epson690K printer, right-click and select "Properties" from the menu.

3. Then in the "Printing Preferences Menu" window, click the "Printing Preferences" button to open the "Preferences" window.

4. Or open a document directly, such as Word, click File Print, open the print window, select the corresponding printer, and click the "Properties" button. You can also open the printer's Print Preferences window.

5. In the main preference window, find the "Quality" option and change the speed of the printer by modifying the parameters after the option.

6. In the new window, you can try to use the preset ratio to define the print quality, i.e. the print speed.

1. Open the printer's properties window, you can do the following: click Start Menu - Printer and Fax in order to open the printer list window.

2. Find the Epson 690k printer, right-click, and select "Properties" in the pop-up menu.

3. Then in the pop-up menu default options bar window, click the "Print Preferences" button to open the preferences window.

4. Or directly open a document, such as word, click File - Print, open the print window, select the corresponding printer in it, and click the "Properties" button. You can also open the printer print preferences window.

5. In the main window of preferences, find the "Quality" option, and you can change the speed of the printer by modifying the parameters behind the option.

6. In the new window, you can customize the print quality, that is, the print speed, by dragging the end of the scale.

Turn on the power switch.

Press and hold the pause button for three seconds, wait for the pause button to flash, and then press the speed button on the left side to adjust the speed.

Adjust to the desired speed position, press pause to save the settings.

After turning on, press the speed button, cut the paper After the passbook light is on, press and hold the pause button for 3 seconds, after the pause light flashes, you can press the speed button to adjust the position you want to adjust! Give it a thumbs up!

There is a speed selector key on the panel to adjust the printer speed.

Operation steps: 1. Press and hold the pause button on the panel for three seconds, and the pause light will start flashing.

2. Press the speed button to adjust the status of the speed light.

3. Follow the indicator light and select the desired status to set it.

4. Set toRegular speed.

5. Set toHigh speed

6. Set toUltra-high speed

You can do it as follows:

1. Turn on the power, if it was on before, turn it off and turn it back on.

2. Press and hold the "Pause" button for 3 seconds, and the light of the pause button will start flashing.

3. Press and hold the "Font" key to start adjusting the printing speed. Each time you press it, the 3 lights in the upper left corner of the printer panel will flash differently. Note: The 3 lights flash differently, and the meaning of the representative is shown on the panel.

4. Press until the status of the 3 lights is "off and off" (that is, Songti high-speed), or "off and on" (black-body high-speed), that is, the high-speed state is selected.

5. After selection, press the "Pause" button to save, and the speed adjustment is over.

6. In addition, we can also choose a lower resolution when printing, and the resolution is low, and the speed will go up. How to set it: Select "Paper Quality" "Advanced" "Print Quality" on the print interface, and select a low resolution.

Summary. Epson 790k to adjust the printing speed, first you have to turn off the power of the printer, then turn it back on, then press and hold the pause button for 3 seconds, let go when the pause light flashes, and then adjust by pressing the speed button, and then press it again after adjustment.

Just stop the key. The speed light, the right light is on is high quality, and the left light.

The light is on for super high speed, and the light on the right is super high speed when it is flashing.

How to adjust the printing speed of Epson 790k.

Epson 790k to adjust the printing speed, first of all, you have to turn off the power of the Dong Nian Yu nano section printer, and then turn it back on, and then press and hold the pause button for 3 seconds, let go when the pause light flashes, and then press the speed button to adjust it, and then press the pause button after adjustment. The speed light, the right light is high quality, the left light is super high, and the right light is super high.

Epson 790k to adjust the printing speed, first of all, you have to turn off the power of the Dong Nian Yu nano section printer, and then turn it back on, and then press and hold the pause button for 3 seconds, let go when the pause light flashes, and then press the speed button to adjust it, and then press the pause button after adjustment. The speed light, the right light is high quality, the left light is super high, and the right light is super high.

1. Turn on the power, if it was turned on before, turn it on again after the switch is off. 2. Press and hold the "Pause First Imitation" button for 3 seconds, and the light of the pause button will start flashing. 3. Press and hold the "Font" key to start adjusting the printing speed.

Each time you press it, the 3 lights in the upper left corner of the printer panel will flash differently. Note: The 3 lights flash differently, and the meaning of the representative is shown on the panel.

4. Press until the status of the 3 lights is "off and off" (that is, Songti high-speed), or "off and on" (black-body high-speed), that is, the high-speed state is selected. 5. After selection, press the "Pause" button to save, and the speed adjustment is over. 6. In addition, we can also choose a lower resolution of lead separation car when printing, the resolution is low, and the speed will go up.

How to set it: Select "Paper Quality" "Advanced" "Print Quality" on the print interface, and select a low resolution.

Here's how to adjust the LQ-630K to ultra-high speed before April 2014:

1. Turn off the power of the printer.

2. Press and hold the "Paper Feed and Unwrap Key" and "Pause Key" at the same time, then turn on the power of the printer, press and hold for about 5s, wait for the print head to start moving and then let go, the printer will print out a page of text.

3. Press the line break button 8 times, the power light goes out, and the paper light and pause light flash. (Press it again and again, and the status of the indicator will change every time you press it).

4. Press the paper feed button three times, the power light will go out, the paper shortage light will stay on, and the pause light will stay on. (If you press it three times and the indicator status is incorrect, continue to press).

5. Shut down and complete the setting.

The following is how to adjust the speed of LQ-630K printers shipped after April 2014:

1. Turn on the power of the printer and load the printer paper. Press the "Wrap Page (Under Item)" button and the "Feed Unwinding (On Item)" button at the same time until the printer makes a "beep" sound and the printer starts printing.

2. Press the button "Wrap Line Change Page (under the project)" nine times. After each press, the printer will print a line of text, and after pressing the ninth, it will print out "Chinese character high-speed", you see what is written behind, if it is not "high-speed" or "ultra-high-speed" to perform the third step, if it is ultra-high-speed, it means that it is already the highest speed, and the fourth step is executed.

3. Press the "Pause (Set)" button. After pressing, "high speed" or "super high speed" will be printed later, press the pause button again, and it will change later, adjust to the speed you want and perform the fourth step.

4. Press the "Wrap Lines (Under Items)" button and the "Feed and Return (Item)" buttons at the same time, and the printer will beep to save the settings.

First, check the paper size you set and the actual continuous paper size you are using.

1.Custom Paper:

XP: Click "Start" in the lower left corner of the computer - > printers and fax machines.

File "->Server Properties", select "Create New Format", enter the name of the custom size (for example: 1234) in "**Name", and enter "Width" and "Height" respectively according to the actual size of the paper (height = number of consecutive paper holes *.

Printer area margin" does not need to be modified, click "Save Format" to complete the paper customization.

Win7: Click "Start" in the lower left corner of the computer - > Devices and Printers", click the printer icon used with the left mouse button, select "Server Properties" in the upper menu bar, check "Create New Form", enter the name of the custom size (for example: 1234) in the "Form Name", and enter "Width" and "Height" respectively according to the actual size of the paper (height = number of consecutive holes *).

Printer area margin" does not need to be modified, click "Save Format" to complete the paper customization.

2.Driver Settings:

Right-click on the printer icon you are using, select "Print Preferences" - > Layout - >Advanced", and select the name of the custom size "1234" in "Paper Size".

3.Application Settings:

Please perform the "Page Setup" according to the above custom size in the application you are using, and if the printed result still has the same problem. It is recommended that you test in a common software such as Word, if the print result is correct, it means that there is a problem with the application software you are using, it is recommended to check your software settings or contact your software developer.

Taking the EPSON LQ-300K II dot matrix printer as an example, the detailed steps to adjust the printing speed are as follows:

1. Turn on the power, if it was on before, turn it off and turn it back on.

2. Press and hold the "Pause" button for 3 seconds, and the light of the pause button will start flashing.

3. Press and hold the "Font" key to start adjusting the printing speed. Each time you press it, the 3 lights in the upper left corner of the printer panel will flash differently. Note: The 3 lights flash differently, and the meaning of the representative is shown on the panel.

4. Press until the status of the 3 lights is "off and off" (that is, Songti high-speed), or "off and on" (black-body high-speed), that is, the high-speed state is selected.

5. After selection, press the "Pause" button to save, and the speed adjustment is over.

Adjust the speed method:

1. Turn off the power of the printer.

2. Press and hold the paper feed and return button and pause button at the same time, then turn on the electrodisperse beam source of the printer, press and hold for about 5 seconds, wait for the print head to start moving and then let go, the printer will print out a page of text.

3. Press the line break button 8 times, the power light goes out, and the paper light and pause light flash.

4. Press the paper feed button three times, the power light will go out, the paper shortage light will be on, and the pause light will be on.

5. The town excavation bridge is shut down and set up.