Why is the new second hard drive not showing up?

Confirm that the data cable and power cable are good and connected normally; load in CMOS

default to see if you can find it; If it doesn't work, open the case, find the jumper of reset, jump and restore the factory settings to see if you can find it. If you can't find it, there may be a problem with the hard drive.

The new hard disk is plugged in, and my computer does not show up because the disk has not been scanned, so you can scan the disk again.

Tools Material: Take win7 system as an example.

1. First, on the desktop, check the "Computer" icon.

2. Then in that interface, right-click on the "Manage" option.

3. After that, in that interface, click on the "Disk Management" option.

4. Then, in the interface, click on the "Re-scan Disk" option in the "More Swift and Multi-Operation" on the right side.

5. Finally, in the interface, the new hard disk is displayed.

Added a hard disk to the computer, but a desktop computer system.

Why can't I see the second hard drive, so why can't a desktop computer system see the second hard drive? The following is why I have collected and sorted out the desktop computer system, why I can't see the second hard disk, I hope it will be helpful to you

Reasons why desktop computer systems can't see the second hard drive.

Tools Raw materials.

Computer. Device Manager.

Method steps.

1. Methods and steps to open the IDE interface:

1. Go to the control panel.

Open the "Management" item, select "Disk Management" on the left, on the right side, only hard disk 0 is seen, and the second hard disk 1 does not appear.

22. To solve the problem of not showing the second hard disk, first open the "Control Panel" program in the start menu.

3. After entering the "Control Panel", drag the scroll bar to find and open the "System" item.

4. After opening the "System Properties" window, select "Hardware" and click the "Device Manager" button.

5. After entering the "Device Manager" window, select "IDE ATA ATAPI Controller".

6. In the sub-item of "IDE ATA ATAPI Controller", there is a red cross in front of the "Secondary IDE Channel" item, indicating that this item has been closed.

7. Since the "secondary IDE channel" is closed, the second hard disk will definitely not be displayed, so select the "Enable" item in the right-click menu.

8. Starting the "Secondary IDE Channel" is not complete, but also open the property item in the context menu.

9. In the Secondary IDE Channel properties window, select Device 1 under Advanced Settings, and its Device Type setting is None.

10. You need to set the "device type" to "automatic detection", so that when you boot up, this port will be automatically scanned, and the second hard disk will be displayed in the system, and after being set to "automatic detection", you need to press the "OK" button to confirm.

11. If your hard disk is installed in the slave disk of "Hail Main IDE Channel", then you need to set it, and select "Properties" in the right-click menu of "Main IDE Channel".

12. Enter the "Main IDE Channel" property window, select "Advanced Settings", then change the "Device Type" under "Device 1" from "None" to "Auto Detection", and then press the "OK" button, so that the settings are completed, and you can see the second hard disk in the computer system.

1.The computer system does not see the second hard drive.

2.What should I do if I have a dual-hard drive computer installed and the new hard drive does not show up.

3.How to install the system on the second hard disk of the computer.

4.How to install a second hard disk on a computer.

5.How to install a second hard drive on a desktop computer.

6.How desktop computers use two hard drives.

7.How to install two hard disks on a desktop.

If the newly added disk cannot be found, we recommend that you turn on Disk Management to check the disk status

1.Enter [Computer Management] in the Windows search bar, and then click [Run as administrator].

2.In the computer management window, click [Disk Management].

View disks in Disk Management. If it says [Offline], right-click and choose [Online].

If it appears online but does not have a drive letter (e.g. e:), right-click and select [Change Drive Letter and Path].

Click [Add].

Select [Assign a new drive letter], and then click [OK].

If it shows as [Unallocated] and you know that the disk partition is empty. Right-click and choose [New Simple Volume], and follow the prompts on the screen to create a disk block in the available space.

3.Enable and reinstall the driver in Device Manager.

3-1.Enter [Device Manager] in the Windows search bar, and then tap [Open].

3-2.Click the triangle next to the device type of [Disk drive]. Right-click on [Undetectable Hard Drive] and click [Enable Device].

Confirm if the drive is detectable. If the [Enable device] option is not displayed, your hard drive is enabled, and please proceed to the next step.

3-3.Uninstall the driver from the hard drive. Right-click on [Undetectable Hard Drive] and click [Unmount Device].

3-4.Tap [Uninstall].

3-5.Restart your computer. After you restart your computer, the system will automatically install the drivers. Confirm if the drive is detectable.

Add a new hard disk to the computer, and the solution is not displayed as follows:

1. Right-click on "My Computer", select "Properties", and in the properties dialog box that opens, select "Hardware" - Device Manager.

2. You can see that there are two hard disks under the "Hard Drive" in the "Device Manager" that you open, which can be detected by 360 Hardware Master Detection and Drive Genie Detection, but in "My Computer", it is still the original partition.

3. In fact, at this time, you only need to partition the computer to solve it, if it is a win7 system, you can partition it with Windows' own disk manager, "Manager" - disk, right click on it after seeing your second hard disk - create - divide the partition size according to your needs - format NTFS - quickly format there and tick - you can see it on my computer after execution; In the case of an XP system, we can install a partition software, search on the Internet, there are many.

4. After the partition is over, open "My Computer" and you can see that the partition has been successful.

What should I do if the installed hard disk does not display?