What to do with Volkswagen Tiguan burning engine oil? Is there any easy way to fix it?

The solution to burning engine oil in the car is to send it to overhaul, but the cost of overhaul is very high, and it is also very time-consuming, so I didn't do it, and now I use GT engine oil to continue, this oil is the base oil of four types of PAO, the quality is very high, even if it burns engine oil, it will not produce carbon deposits, it can protect the engine well, there is no problem with normal driving power, and it is much better than overhaul.

The problem of burning engine oil can only be solved by repairing the engine, and everything else is in vain.

In order to protect the engine and prolong the life of the engine, German cars are designed to reduce the frictional resistance between the piston ring and the cylinder wall, and an oil film will be formed in the cylinder wall, and part of the oil film will be burned off with the gas burned at high temperature, so the oil loss is more than the same period last year.

1. Volkswagen's processing technology for engine cylinders, the engine cylinder wall is shown as a mesh shape under the microscope, each small mesh is a "small oil depot" for storing oil, and the piston has better lubrication performance than the flat cylinder wall when running up and down in the cylinder, which also minimizes the wear between the piston ring and the cylinder wall.

2. The toughness of the piston ring of the Volkswagen car is better, and the degree of tension is weaker than that of the Japanese car, simply put, it is strong, but the elasticity is small, and this matching naturally reduces the wear caused by the piston ring running up and down on the cylinder wall, so the Volkswagen car after driving hundreds of thousands of kilometers to measure the wear of the cylinder wall of the engine, which is much smaller than that of other car series, and the engine can still maintain good working condition.

3. The engine is like the heart of the car, the engine burns oil in the final analysis, or the piston ring has a problem, under normal circumstances, there will be oil loss every 1000km, if it exceeds too much, it is possible to burn oil. If there is a problem with the sealing of the piston ring, the oil will follow the movement of the piston and secretly drill into the combustion chamber to participate in the combustion, and then the oil will be burned.

4. In order to prolong the service life of the engine, Volkswagen manufacturers cause engine oil to be burned.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Fuel in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston cylinder wall clearance, etc., all of which are directly or indirectly related to the formation of carbon deposits, so keeping the fuel circuit clean is of great help to prevent burning engine oil, of course, this needs to be done with the help of high-quality PNF fuel additives.

There are two ways to solve the problem of burning engine oil

Overhaul. PNF restoratives.

Benefits of this one:In the case of overhaul, the cost is very high, the vehicle depreciates quickly, and the later run-in is also very troublesome. First of all, you have to find out the reason for your burning oil, oil circuit blockage, carbon deposits, piston ring stagnation can be repaired with repair agent, there are riders who have repaired it with repair agent before, you can refer to it.

Check whether the wastegas valve is leaking first.

Look at the ** burned, is it a turbine leak or an oil-gas separator problem or the piston air tightness is not enough. If the car is older, you can consider adding a more viscous oil, which will also help to reduce burn-in. It's burning badly, hurry up and repair it, or there is too much carbon in the engine, and there is a certain possibility that the cylinder will be pulled.

Hello, if this car is found to burn engine oil during the warranty period, this can go to the 4S shop to claim the free repair of the engine.

The problem is that the car or the engine oil is too low.

1. Carry out different maintenance methods according to different reasons, including replacing the valve seal.

2. Clean up the carbon deposits inside the engine, replace the piston rings and use higher type fuel.

3. Let the internal parts of the engine be better lubricated.

4. Use engine oil that meets the technical requirements of the vehicle.

5. Avoid frequent rapid acceleration and long-term ultra-high-speed driving.

6. When filling the oil, it should meet the specifications.

7. Use metal repair Chingshan agent: The principle of metal repair agent is to use nano-scale cermet to fill the worn places on the cylinder wall, and fill the tiny holes on the piston ring to improve the tightness between the cylinder and the piston.

Pay attention to the selection of new car engine oil

The new car is still in the run-in period, special attention should be paid to the selection of oil in the limb, the grade of the oil should not be too low, and the viscosity should not be too high. This is due to the small gap between the bearings during the running-in period of the engine, and the metal grinding debris and a large amount of heat are easy to be generated between the bearings, which requires the lubricating oil to have better fluidity, that is, smaller viscosity, so that it is easy to take away the metal chips and play a better cooling role, so as to avoid the accident of burning tiles and holding shafts.

Hello, this situation suggests that you overhaul the engine.