How to fix vertical stripes on a computer monitor?

What should I do if there are streaks on my computer screen? Generally, there are two possibilities for this problem, a problem with the graphics card, or a problem with the monitor.

There are many reasons why streaks appear on a computer screen, and it is generally caused by the display being subjected to strong magnetic interference from the outside or inside. To check if the graphics card is overheating or not, we use the easiest way to solve it, install your monitor on another computer and see if it looks normal.

Causes and solutions for streaks on the computer screen:

1.External interference: It is due to strong electromagnetic interference in the vicinity of the display, such as electric sparks and high-frequency electromagnetism.

If the intensity of interference is very high, it will cause the entire screen of the monitor to produce white horizontal streaks; If the intensity of the interference is not high, it can be characterized by a severe change in one corner of the display.

Solution: When these two situations occur, we must first focus on checking the surroundings of the display site to eliminate the equipment with strong magnetic interference, and in general, the problem can be solved.

2.Interference from the inside: The performance of internal interference is very different from that of external interference, and if the display is interfered with, it will cause the display screen of the monitor to appear black horizontal stripes, and it is more serious.

Solution: In this case, we can open the case to check if there is any bad contact inside the display, whether there is any problem with the output end of the power supply or the output transformer, etc.

3.Another reason is that if the display is used for a long time, the internal capacitors will deteriorate and fail, resulting in too slow start-up, gray screen, and blurry fonts. At this time, as long as the aging capacitor is replaced, the fault can generally be eliminated, but because it is also a very high-tech work, it is recommended to send it for repair.

4.Due to improper setting of the display resolution, there may also be a serious streak fault on the computer screen, this kind of fault will generally appear on older machines, if your computer is working under win95, then you can press the F8 key to enter the safe mode of the system, reset the display mode of the display, and generally be able to troubleshoot after restarting.

1.The graphics card's memory is damaged and needs to be replaced or repaired.

2.The interface between the monitor and the graphics card is not in good contact, just plug it in tightly.

3.The display data cable is aging and needs to be replaced.

4.The display itself is aging or defective, so it is better to throw it away and replace it with a new one.

Hello, solution 1: The phenomenon of irregular stripes in the laptop caused by the failure of the graphics card is the failure of the graphics card caused by the use of the computer for a long time, if there is such a situation, you should turn off the computer in time, let the computer rest for a while, so that the graphics card of your laptop is buffered slowly, otherwise the graphics card will be damaged after long-term use. In addition, the screen of the laptop should be wiped frequently, so as to ensure the cleanliness of the laptop screen, because once the inside of the screen enters the dust, it will damage the chip of the laptop screen, which is relatively fragile and cannot be restored once damaged, so it is very important to keep the laptop screen clean.

Solution 2: If the refresh rate is set too low, it will cause the screen to shake, the check method is to right-click the blank area of the system desktop, and click the "Properties" command from the pop-up right-click menu to enter the property setting window of the monitor. Click the "Settings" tab in this window, and click the "Advanced" button in the corresponding label page that pops up behind it to open the advanced property settings interface of the monitor.

Then click on the Monitor tab where you can see the monitor's.

Here's how to fix the vertical stripes on the computer monitor screen:

1. Problems with the graphics card.

If the graphics card is broken, there will be a blurred screen, and dust will also appear, check the graphics card, open the chassis to remove dust, this reason is the most likely.

2. Problems with the display screen.

Put *** into the optical drive to see for 30 minutes,See if there is a phenomenon of a blurred screen,If there is a basic one, you can conclude that the display is broken,If not, it is not a problem with the display。

3. Software conflicts.

Software conflicts can also occur sometimes, but the green stripe is rare.

The following points should be paid attention to in the maintenance and maintenance of LED displays:

1. The display should also be a combination of work and rest.

Because the basic display principle of LED backlight display is no different from that of traditional CCFL backlight display, it relies on the backlight tube to irradiate the LCD screen to present the image. At the same time, the pixels of the LCD screen are composed of a lot of liquid crystals, and the continuous use for too long a time will cause the crystal to age or burn out, and once the damage occurs, there will be the bright spots and bad pixels we say, and these damages are permanent and irreparable.

2. Avoid hard objects bumping and scratching.

For most LED backlight displays, their most vulnerable place is the screen, the general screen hardness is below 3H (the hardness of the pencil lead), it is easy to be "mistakenly injured" by other devices if you don't pay attention to it when you use it, and once the screen is damaged, it means that the LED display is basically scrapped.

Summary. As far as the description goes, the vertical lines on the display are caused by the impact of external forces or moisture absorption on the top bezel. The recommendations are as follows.

1.The monitor is powered off, and the back shell is blown with a hair dryer for 10 minutes.

2.It will improve by pressing firmly on the top shell where streaks appear.

3.If 1 and 2 are invalid, it is recommended that you send them for repair. It takes 100 how to deal with the vertical stripes on the computer display.

As far as the description goes, the vertical lines on the display are caused by the impact of external forces or moisture absorption on the top bezel. The recommendations are as follows1The monitor is round guessed that the power is off, and the back shell is blown with a hair dryer for 10 minutes

Pressing firmly on the top casing where streaks appear will improve 3If 1 and 2 are invalid, it is recommended that you send them for repair. Requires 100

Well, I fell like this, and the vertical stripes are still shaking.

How much will it cost to send it for repair?

If it is sent for repair, **100 or no repair value is reported.

Therefore, it is recommended that you send it for repair, **100

Oh oh ok, thanks.

You're welcome, if you have any doubts, you continue to ask.

Ask about custom messages].