How to fix a car door that is a little recessed?

We drive every day, it is inevitable to encounter bumps and bumps, a new car does not take long to have scars, the body door is a little recessed is also very normal, although this depression is not obvious from a distance, but it still affects the beauty of the whole car up close. Here's how to fix a dent in the door.

As long as the paint surface of the door depression does not fall off or peel off, and the depth of the depression is not very deep, then we can repair it with professional tools and try to restore it to the previous body state, without the need to remove sheet metal and paint. Hearing this, I believe that many car owners will breathe a sigh of relief, after all, the ** and time-consuming sheet metal painting are quite exaggerated.

We can buy a set of dent repair tools online, which is not expensive, and you can have it for dozens of dollars. First of all, clean the indented area, then load the special glue into the glue gun, plug in the power supply and preheat it for about 7 minutes. Then choose the appropriate gasket, pay attention to the large depression with a large gasket, the larger the gasket, the greater the traction force, and then use the glue gun to evenly coat the gasket with sol, quickly paste into the concave position, and gently press until the special glue is fixed and then let go.

Align the hole in the middle of the towing bridge with the gasket after attaching, put the nut into the gasket screw bar and tighten it, and then twist the nut until it is pulled to the recess and trimmed. After the repair is completed, the tool is removed, and then the alcohol is sprayed on the body residue, and finally cleaned with a scraper.

If you don't want to do it yourself, then we can hand it over to the repair shop outside, they have a technology called depression repair, also known as light sheet metal, but the depression repair technology is actually similar to our own hands, all of which use suction cups to suck out the depression position, and then use the hook to reach behind the depression area, and then slowly eject out, and finally use a rubber hammer to deal with the protruding part.

Automobile depression repair technology is determined according to the difficulty and area of the depression repair, as well as the sharpness of the depression, the sharper the pit repair, the greater the difficulty of repairing, and the more than a few hundred yuan. For example, a depression in the shape and size of an egg generally costs about 150 yuan.

Door dents may seem easy to repair, but they are actually very limited and cannot be repaired if they are damaged in the case of paintwork, and if they are located near the wheel arches, corners and AB pillars, then they are not easy to repair.

Walk on the top without a trace of the depression repair. That is, polish it under 200 pieces, and if there is no big depression on the side after polishing, it will be no problem.

If it's not obvious, forget it, if it's obvious, you can first take hot water to see if you can absorb it well, if you can't do it and pursue perfection, you can only go to the car repair shop to repair it, and generally you can go to Changsha Rongxiang to do paint-free repair, fast and high-quality.

If the door of the car is recessed a little bit of air. How to fix this, this is simple, because if you fix this, you should be able to pull it out with a shaping machine.

In this issue, we will share with you 6 ways to fix car door dents, save time and money, let's take a look!

With the affluence of everyone's life, more and more people can afford to buy a car, remember when I was a child, the family was poor, only bicycles, and then when I grew up, the family was a little more comfortable, and then I bought a car, when the car arrived at home, everyone in the family was very excited, and for the car is very cherished, the body is dirty to be wiped, the interior does not allow children to get dirty, it can be said that it is very cherished, but there is always some small friction when driving, once the car door is recessed a little, Dad is very distressed, and immediately went to repair, so the car door is recessed a little, is it necessary to repair it? Let me give you an analysis.

So is it necessary to fix the car door if it is recessed a little? The answer is that it is not necessary. There are two reasons for this.

The first reason is that it does not affect the other functions of the car, the car door is only a little recessed, which does not affect the other functions of the car at all, and does not affect the opening and closing of the door, but it may look a little unsightly; The second reason is that it is more troublesome. Repair this door needs to be insured, and sent to repair for a few days, not only delay time, but also may be higher in the next year, so it is not cost-effective, and often walk by the river, it is normal for the car to bump and bump, this small injury does not have to be repaired, you can wait until the bump is more one-time to repair it, so that it is more time and energy saving.

When the door of the family was touched, it was not recommended to repair it immediately, but it was a pity that the father cherished the car more, and could not see that the car was a little damaged, so he didn't listen to the words, and went directly to repair it.

All in all, if the car door is recessed a little, the cost and time of comprehensive repair, and this situation does not affect the other functions of the car to consider, there is no need to repair, in fact, I want to say that we still have to be cautious when driving, although the car door recessed does not affect anything, but everyone will definitely feel sorry for their car, so drive cautiously to avoid accidents, resulting in their own sadness.

I don't think it's necessary, because it doesn't affect the daily driving of the car, and if the requirements for the car are particularly strict, it can also be repaired.

Of course, it is necessary because it will make the car look more beautiful, and secondly, it will also prevent the paint from peeling off due to this shape for a long time.

If you don't think it will affect the appearance of the car, then there is no need to repair it, otherwise it may be necessary.

Generally, the ** ranges from 100 to 400 yuan. Different regions, different models, different damage status and area, the charges are different, generally speaking, it depends on which part is the specific part, how big the depression is.

Sheet metal engineering owners generally can not complete their own, need to be carried out through the car repair shop, if you choose a general repair shop, sheet metal plus painting ** is about two or three hundred yuan, for economic considerations of the owner can choose a more reliable repair shop.

If you take into account the level of construction and after-sales service, car owners can choose 4S shops, which may be more expensive, but the quality should be first-class, and more professional color mixing can be carried out in terms of painting.

Car Dent Repair Tool:

1. A crowbar. In fact, there is no professional name for this thing, and its role in the repair process is to restore the dent to its original state by prying. It is mainly used as a steel plate that is recessed into the top from the inside to the outside, this technique must be delicate, and the fine-tuning is the key little by little, otherwise the frequent and large-scale action will destroy the original force and toughness of the steel plate and even cause greater body damage.

2. Rubber hammer.

In terms of appearance, this tool is no different from an ordinary hammer, but the difference is that both ends of the hammer are made of rubber material, which can play the role of a hammer without damaging the paint. It is mainly used to repair the overall shape by smashing from the outside in.

3. Pointed end. This pencil-like thing was used a lot throughout the restoration, and due to its hard texture and relatively sharp ends, it gained a lot of pressure, and it played a great role in fine-tuning the bumps in the body.

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

Similar to the one in the picture, it is generally about 300 yuan.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.

The small depression of the car door can be solved by the suction cup, that is, the depression is repaired by the principle of pressure, and the principle of the door depression is repaired by the suction cup

1. It is adsorbed on the object and has a very large tearing force. Then we can repair the small depression of the door through this small suction cup, adsorb the suction cup on the depression, if the depression is larger, you can use a few more. For sharp and large-area depressions, it is recommended to go to the repair shop and call a sheet metal master to repair it.

2. You can pull it out with the help of tools, which requires skillful force, otherwise the depression is likely to become prominent and affect the appearance. You can use a bridge suction rod that can suck up the sol gasket that we have attached, and then twist the nut until it is pulled until the depression is flattened, so that the force will be more even.

3. Another method is to go to the store to carry out light sheet metal, use a suction cup to suck out the concave position, and then use the hook to reach behind the concave area, and then slowly eject out, and finally use a rubber hammer to treat the protruding part, which is similar to the effect of do-it-yourself.

4. The general sheet metal repair is determined according to the difficulty and area of the depression repair, the larger the area and the sharper the depression, the more difficult it is to repair, so it is relatively expensive.

Not all depressions can be repaired, as long as the paint does not fall off, does not fall off, and the depth of the depression is not very deep, the method of depression repair can be used. However, if the depression is located near the wheel eyebrows, corners and AB pillars, the difficulty of repair is much higher.

You don't need to take insurance, as long as you don't hurt the bottom paint, you can drive to your local auto parts city to do a traceless repair shop to do a traceless repair, you don't need to re-paint after you do it, if there are scratches, you can do a polish, keep the original paint.

The hollow of the door is actually repaired in the same way as the depression in other positions, but some small hollows in the front door can be repaired by pulling and using glass hooks. If the body is dented and the paint is off, it is recommended to paint the sheet metal.

Hello, the recessed part can be sheet metalized.

1. Align the traction pad covered with hot melt adhesive with the center of the groove and gently press it with your hand. After 3-5 minutes, align the center hole of the rally bridge with the axis of the traction washer and then install it. Pull out the spacer evenly and it will slowly dent.

2. In the offset position, the tool hook cannot be extended from one side. The door can be removed, and you can find the right tool to prepare for removing the door.

3. Remove some of the fixing screws hidden in the inner panel, and then destroy the inner panel evenly. The in-house repair team is divided by 3 and 5 because the average repair experience of a sharkskin dent repair master is more than 3 years. Please delete it.

If you do this yourself, be careful not to break the clasp.

4. The next step is to remove the wiring harness. Remember the original position of the harness and the corresponding interface. Do not disassemble when cool. I also don't know when it was installed. Please remember clearly.

5. Basically, the internal structure can be disassembled, and the hook can be retracted, but this is usually enough. Locate the iron mounting bracket for repairs and secure the door to prevent it from moving back and forth.

6. Then, extend the hook to the other side of the dimple and use the light from the light board to observe the dimple changes in real time. **Towels are used to protect the doors. There are strict repair procedures and protection plans in place to ensure that the car does not cause secondary damage during the repair process.

7. After reaching a certain level, please use a hammer and a special wooden pen**The pen in the pen is Indian sandalwood, which will not scratch the paint of the car, and beat back and forth until the dimples are mixed into the paint of the car.

8. It is basically submerged and invisible to the naked eye, but the standard has not yet been achieved, and it will do well if it is repeated a few times. The above is how to fix the recessed car door.

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

Similar to the one in the picture, it is generally about 300 yuan.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.