Canon IP2780 printer flashes yellow light 16 times

1. The printer lights up yellow.

It may be the reason that there is no ink, because the printer can only identify the capacity of the original ink, if this is the case, the printed font color may be relatively light, and adding some ink can solve it.

2. It is also possible that the printhead is blocked after being used for too long, and in such a situation, the printer can be used for deep cleaning.

3. If the printer lights up yellow and cannot be printed, there may be a reason for the paper jam.

Take it all out, tidy it up, and put it in the printer.

4. If the printer continues to turn on the yellow light and there is no paper jam, you can first power off the printer, and then re-power the power.

Press and hold the stop button and the button below the power button for more than 5 seconds to resume printing.

Summary. Dear, the Canon IP2780 printer will flash yellow.

1. The general situation is that the ink cartridge has not been installed, it is recommended to remove the ink cartridge and try it back before reinstalling it. Second, the reason is that the waste ink bin is full, which is prompted by the program, and it will be like this after you clean it a certain number of times. You can find a 2780 waste ink bin clearing software on the Internet and run it, and the waste ink bin can be used normally.

Dear, the Canon IP2780 printer will flash yellow.

1. The general situation is that the ink cartridge has not been installed, it is recommended to remove the ink cartridge and try it back before reinstalling it. Second, the reason is that the waste ink bin is full, which is prompted by the program, and it will be like this after you clean it a certain number of times. You can find a 2780 waste ink bin clearing software on the Internet and run it, and the waste ink bin can be used normally.

If you have strong hands-on ability, you can also do the following: 1. First, open the paper tray lid of the Canon 2780 printer. 2. Furthermore, take out the ink cartridge of the Canon 2780 printer and empty the Canon 2780 printer.

3. Next, press the "1" button on the control panel of the Canon 2780 printer. 4. After that, press the "Clear Return" button on the control panel of the Canon 2780 printer. 5. Finally, on the control panel of the Canon 2780 printer, press the "Start" button to clear the battery.

1. FINE cartridges cannot be recognized.

2. The fine cartridge may not be installed correctly or the fine cartridge may not be compatible with this printer. Please open the front cover and install the f correctly

3. INE cartridge or FINE cartridge compatible with this printer.

1. The yellow light is on that the machine does not recognize the cartridge, the general domestic cartridge may encounter this problem, this is the chip obstacle deliberately set by the original manufacturer, it needs to be cracked and cleared, if it just shows "the ink has been used up" or "install the used cartridge", then press the ok key directly, if the light will still flash, press the stop reset button for more than ten seconds, see if the light will flash, if it is still flashing, you can try the following clear square pure key or method:

2. Turn off the power supply, reconnect the power to do Wu Yuan, press and hold the electric excitation key with one hand at the same time, press the stop reset button with the other hand, quickly take the hand away before the light is on, and the light has to start again, press the paper feed button three times, and then press the power switch, basically it's OK.

Hello! Let me answer this question for you Canon printer IP1180 print key yellow light flashing has the following possibilities: 1. Wrong paper supply:

Yellow light flashes 2 times; 2. Paper jam error: the yellow light flashes 3 times; 3. Ink is used up: the yellow light flashes 4 times; 4. Wrong installation of ink cartridges:

Yellow light flashes 5 times; 5. No ink cartridge: yellow light flashes 6 times; 6. Car error: yellow light flashes 7 times; 7. Waste ink warning:

Yellow light flashes 8 times; It would be nice to deal with it in comparison.

Summary. 1. The yellow light is on that the machine does not recognize the cartridge, the general domestic cartridge may encounter this problem, this is the chip barrier deliberately set by the original manufacturer, it needs to be cracked and cleared, if it just shows "the ink has been used up" or "install the used cartridge", then press the ok button directly, if the light will still flash, press the stop reset button for more than ten seconds, see if the light will flash, if it is still flashing, you can try the following clearing method:

2. Turn off the power supply, reconnect the power supply, press and hold the power button with one hand at the same time, press the stop reset button with the other hand, quickly take the hand away before the light is on, and the light has to start again, press the paper feed button three times, and then press the power switch, basically it's okay.

IP2780 printer green light and yellow light keep flashing.

Hello, Hello, it's a pleasure to serve you, and here is the relevant information I have found for you.

1. The yellow light is on that the machine does not recognize the cartridge, the general domestic cartridge may encounter this problem, this is the chip obstacle deliberately set by the original manufacturer, it needs to be cracked and cleared, if it just shows "the ink has been used up" or "install the used cartridge", then press the ok button directly, if the light will still flash, press the stop reset button for more than ten seconds, see if the light will flash, if it still flashes Qi Heng, you can try the following clearing method: 2. Turn off the power supply and reconnect it to the power supply, Yu Rent holds down the power button with one hand at the same time, and presses the stop reset button with the other hand, quickly take the hand away before the light is on, and the town light is on and you have to start again, press the feed button three times, and then press the power switch, basically it's okay.

I hope that my efforts can be a good help to Zhongnai, you wish you a happy life, good health, and a lot of money

Canon printer IP1180 print key flashing yellow light is possible as follows:

1. Paper supply error: yellow light flashes 2 times;

2. Paper jam error: the yellow light flashes 3 times;

3. Ink is used up: the yellow light flashes 4 times;

4. Wrong installation of ink cartridge: yellow light flashes 5 times;

5. No ink cartridge: yellow light flashes 6 times;

6. Car error: yellow light flashes 7 times;

7. Waste ink warning: yellow light flashes 8 times;

Summary. Hello dear. As far as the description is concerned, the Canon IP1880 inkjet printer, which has not been used for a long time, after turning on, the reasons why the yellow light and the green light flash alternately are as follows, consultation record · on 2022-10-12

Canon IP1880 inkjet printer, I haven't used it for a long time, after turning it on, what is the reason why the yellow and green lights flash alternately, and how can I solve it?

Hello dear. As far as the description is concerned, the Canon IP1880 inkjet printer, which has not been used for a long time, after turning on, the reasons why the yellow and green lights flash alternately are as follows, 1The Canon IP1880 inkjet printer flashes alternately with yellow and green lights indicating that the printer has an internal error caused by a component error.

2.You haven't used the printer for too long, causing the inkjet printer to get the ink clogged or the print head to get clogged.

The workaround is as follows,1For the Canon IP1880 inkjet printer, pressing and holding the triangle button (i.e., the button below the power on button) cancels the flashing state.

2.Then on your computer, open the Control Panel, Devices & Printers, and find the Canon IP1880 Inkjet Printer.

3.After right-clicking, Printer Properties, Maintenance, find Printhead Cleaning, and perform Printhead Cleaning. 4.After 3 executions, the test page is printed, and the test page is normal Canon IP1880 inkjet printer can be used normally.

Above, can you understand? <>

Canon IP1800 printer yellow light.

Flash 15 times because you have installed an ink tank that is not suitable for this printer, and the correct ink cartridge needs to be installed.

How to install printer cartridges:

1. Take out the ink cartridge of the printer, the color printer has a black ink cartridge and a color ink cartridge, and the black and white printer only has a black ink cartridge.

2. Peel off the label of the cartridge and stick it on the side of the cartridge or other out, we can see that there are 5 small holes on the cartridge, which is the corresponding color of the color cartridge as shown in the figure, and any hole on the black cartridge can be inked.

3. Turn the ink on and place the syringe.

Insert the ink into the ink and draw the ink, about 3ml of ink is removed.

4. In this way, the ink is extracted according to the corresponding color and added to the ink cartridge, and it should be noted that the minute ink is used with different syringes and cannot be mixed. The syringe is shallowly inserted into the sponge of the ink cartridge, and the ink is slowly injected to make the sponge completely absorbed, and it is not easy to add more, otherwise the ink will leak.

5. Attach the cartridge label back to its original place, and the cartridge can be used when it is put back into the printer.