How to use the exterior mirror heating of the Audi A6L

The heating button of the Audi A6L rearview mirror is in the folding adjustment position of the reflector, there is a heating knob, the knob is turned to the middle is automatic heating, it will not be heated on both sides, and it can be heated by adjusting it to the corresponding position.

The Audi A6's mirrors are useful for heating up on rainy days, and they heat up the electric mirrors, which are the mirrors on both sides of the window.

First, there is no need to adjust the angle by hand, and there is generally a control button next to the driver's seat to adjust the angle of the mirror.

Second, the mirror can be heated automatically, so when it rains and snows, you can dry the water droplets or snow on the mirror, so that it will not affect the vision.

The rearview mirror heating function means that when the car is driving in rain, snow, fog and other weather, the rearview mirror can be heated by the heating wire embedded in the lens to ensure that the lens surface is clear.

When the rearview mirror is heated, the heater behind the lens quickly heats the mirror, which can slowly remove the rain or fog on the mirror, saving the driver the trouble of frequently wiping the lens, thereby reducing the danger of driving.

In fact, the working principle of the electric heating rearview mirror is very simple, and the cost is not very high, that is, an electric heating sheet (electric heating film) is installed in the lens of the rearview mirror on both sides, in rainy and snowy weather, the owner turns on the electric heating function of the rearview mirror, and the electric heating film will be quickly heated to a fixed temperature within a few minutes, generally between 35-60 degrees Celsius, so as to play the effect of heating the lens, defogging and defrosting.

Attached: How to use the heating function of the car rearview mirror: The car rearview mirror heating switch is usually located next to the rearview mirror adjustment key, which is a key with a rectangular pattern and wavy lines. The specific steps to use the mirror heating switch are as follows:

1. Press the brake pedal of the car and prepare to turn on the power of the whole car.

2. Press the one-button start button of the vehicle.

3. The dashboard of the car is lit up, and the power of the whole car is turned on.

4. Press the hotbutton next to the switch of the exterior mirror to open the rearview mirror. When the exterior mirror heating function is turned on, the water mist on the exterior mirror slowly dissipates.

The Audi A6L mirrors are adjusted in the door armrests. Rotate the knob to the left to the left rearview mirror mark, and then you can shake the knob up and down, left and right, to adjust the angle of the left rearview mirror. Similarly, the knob can be rotated to the right to the right mirror to adjust the angle of the right mirror.

There is also a 0 mark in the middle, which represents the vacant position, so as to prevent accidentally touching the knob and disturbing the previous setting.

A6L heated mirror.

Heated mirror function logo, at the bottom right of the knob. At this point, turn the knob to this position to heat the mirror. Generally, in rain, snow and fog, remove the moisture or frost on the mirror surface to ensure the clarity of the mirror.

A6L rearview mirror folding.

At the bottom left of the knob is the rearview mirror folding logo. Similarly, turn the knob to that position and the mirrors will automatically retract. Of course, the automatic retraction function of the rearview mirror of some models can also be set to automatically retract after the vehicle is locked.

The rearview mirror adjusts the angle correctly.

1. **Rearview mirror.

Adjust the ** rear-view mirror, so that the rear-view mirror is parallel to the horizon, and let the horizon line be placed in the ** position of the mirror 1 2 places, the mirror is slightly similar to the driver, to ensure that the vehicle behind can be seen clearly.

2. Left rearview mirror.

Adjust the horizon line to the left side mirror**1 2, and at the same time let the body expose 1 4 in the mirror. Too little body reflection is exposed, and the vehicle close to the rear of the car is not visible; If there is too much body image, it is easy to see the vehicle that is already in parallel.

3. Right rearview mirror.

Because on the right, the driver's blind spot will be larger, and the angle of adjustment is different from the left rearview mirror. At this time, the horizon should be adjusted to 2 3 in the right rearview mirror, and the body image should also be exposed 1 4.

Heated mirrors are useful when driving in rain, snow, fog and other weather, as well as in winter. The function of rearview mirror heating is that when the car is driving in rain, snow, fog and other weather, the rearview mirror can be heated by the heating wire embedded in the lens to ensure that the surface of the lens is clear. However, when the rain is particularly heavy, the effect of mirror heating will not be obvious enough.

Exterior mirror heating function is used in winter after the rearview mirror frost or ice, as long as the rear window defrost switch is opened, this switch is generally a button, located on the center console, press the button outside the rearview mirror will begin to heat, when it reaches a certain temperature, it will automatically turn off, and the frost or ice on the rearview mirror will disappear soon, which will bring great convenience to the driver.

When driving in foggy days or rain and snow, the fog of the rearview mirror surface caused by fog, frost or rain invasion in winter will cause the driver's vision to the opposite side of the rear is not clear, and the driver needs to stretch out the window from time to time to clean the lens surface, which is not only extremely inconvenient, but also seriously affects the driving safety, and is only a temporary measure, and the fog and rain will immediately make it blurred.

And the rearview mirror with heating function, when encountering the above situation, the driver only needs to turn on the heating defrost button, and the rearview mirror will be heated (generally about 45), remove the fog and frost on the surface of the lens, make the rearview mirror clear, not only convenient and save a lot of trouble, but also improve the safety factor when driving. At present, the domestic medium and high-end cars are equipped with this kind of rearview mirror with heating function.

Turning the knob to the middle will automatically heat, and putting it on both sides will not heat.

The rearview mirror heating function is not available in every vehicle, so check whether your vehicle is equipped with it.

When turning on the rearview mirror heating switch, avoid mixing it with the front windshield.

In rainy and snowy weather, when pressing the car rearview mirror heating switch, the indicator light on the button lights up, and the heating sheet will quickly heat up to a fixed temperature within a few minutes.

The defrost and defogging function key is placed on a button, that is, after pressing the heating button of the rearview mirror, the rearview mirror and the rear window of the vehicle are heated at the same time to achieve the effect of derainwater, defrosting and defogging.

The exterior mirror should be heated to the outside temperature lower than 20, and the rotation of the rearview mirror should be twisted to the middle, as long as the knob is screwed to the middle, it will be automatically heated.

The exterior mirror of Audi A6 has a heating function, which is used to cause the driver to not be able to clearly see the rear of the vehicle due to water vapor or rain and snow in rainy and snowy weather, thus affecting driving safety

1. Press the brake pedal of the Audi A6 car.

2. Press the one-button start button of the Audi A6 car.

3. The instrument of the Audi A6 car lights up, and the power supply of the whole car is turned on.

4. Press the rearview mirror heating button located in the Audi A6 to turn on the exterior mirror heating function of the vehicle.

5. At this time, the Audi A6 exterior mirror will slowly become hot to remove the dirt on the lens.

When the rear window heating device is turned on, the rearview mirror is automatically heated.

The Audi A6L mirror heating system is automatically switched on when the rear window heating is turned on and the outside temperature drops below 20 degrees Celsius. Depending on the outside temperature, the mirror surface is heated. When the vehicle detects that the outside temperature is below 20 degrees, the rearview mirror heating function is switched on.

When the temperature detected by the external temperature sensor is lower than 20 degrees, it will be switched on.

It should be noted that although the external temperature** displayed by the meter is also measured by the external ambient temperature sensor, it will be recalculated based on data such as vehicle speed and engine temperature. That is, the temperature at which the rearview mirror heating function is turned on is not equal to the temperature displayed on the meter. Simply press the rear window of the center console to heat up the mirrors and heat them up (as shown in the picture below).

<> first of all, let's take a look at how to judge whether a car has a rearview mirror heating function. As you can see, there is a mirror adjustment knob on the left front door, which shows that the car has a heated mirror.

So what are the functions of rearview mirror heating?

Let's start with the icon in the image above:

Figure 1 is the symbol of defrosting in the front gear, which uses the air conditioning air to remove fog caused by temperature difference in the front gear or frost caused by the weather.

Figure 2 shows the rear gauge heating symbol, which uses a heating wire to remove mist or frost from the rear gauge.

Figure 3 is the rearview mirror heating symbol"It's the same way"It can also be concluded that it can be heated by heating the heating wire to remove mist and frost.

So, should the rear heater be able to remove water?

Through the comparison of the above two **, it shows that the heating of the rearview mirror can evaporate the fine water droplets in a certain period of time. However, the effect of the rearview mirror heating and water removal function has a lot to do with the current rainfall and vehicle speed.

Summary. 1.The rearview mirror heating function automatically heats up when the following operating conditions are met:

The mirror adjustment knob is on heating setting.

The outside air temperature is below 20

2.The outside air temperature is measured by the exterior temperature sensor, not the temperature displayed using the instrument cluster.

3.The rearview mirror heating function automatically adjusts the heating power from 0-100% depending on the outside temperature and the current vehicle speed

4.There is no problem with heating and defrosting and defogging the mirrors, and the effect is not as fast as we think when removing water on rainy days.

The Audi A6L mirror heating switch is located on the driver's side door panel. The exterior mirror heating function needs to meet certain conditions before it can be activated, and the heating system is automatically switched on when the rear window heating device is turned on and when the outside temperature drops below 20 degrees Celsius. The temperature at which the rearview mirror heating function is turned on is not equal to the temperature displayed on the meter, and the external temperature** displayed by the instrument will be recalculated in combination with data such as vehicle speed and engine temperature.

The Audi A6L mirror heating switch is located on the driver's side door panel. The heating function of the exterior mirror can only be turned on if certain conditions are met, and the heating position is not installed when the rear window Minna glass heating device is turned on, and the outside temperature is lower than 20 degrees Celsius. The temperature at which the rearview mirror heating function is turned on is not equal to the temperature displayed by the instrument, and the external temperature of the instrument display** will be recalculated in combination with the vehicle speed, engine temperature and other data.

Audi A6L Mirrors The heating button is folded in the mirror. There is a heating knob. Turn it to that position to heat. The position is on the door panel on the side of the open driver's seat.

The rearview mirrors of the Audi A6 are very useful for heating in the rain. It heats the electric mirrors, which are the mirrors on either side of the window.

First, there is no need to manually adjust the angle. It is electric. Generally, there is a control button next to the driver's seat that adjusts the angle of the rearview mirror.

Second, the mirror can be automatically heated, and when it rains or snows, you can wipe the water droplets or snow off the mirror so that the view is not affected.

Heated Audi A6 mirrors are generally more practical in winter. When driving in winter, we will find that the glass on our car is almost frosty, and it is difficult to wipe it off with a towel. Frost on the front windshield can be removed by turning on the heater and blowing the glass after parking.

Frost on the rear windshield can be removed by turning on the heating switch of the rear windshield and heating it through the heating wire in the rear windshield.

The A6 rearview mirror has an anti-glare switch. When it's turned on. There was a bright light from behind.

Anti-glare is automatically turned on. A piece of glass in the rearview mirror is moving. Bright light is refracted elsewhere.

It doesn't shake the driver's eyes. It is a tool for the rearview mirror driver to directly obtain external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent traffic accidents, and ensure personal safety, all countries stipulate that cars must be equipped with rearview mirrors, and all rearview mirrors must be able to adjust the direction.