What should I do if the fiber modem port is insufficient????

If the fiber modem port is not enough, you can install a router, and generally there are 6-8 router ports, which can meet the use of basic ports.

Fiber connection router installation Setup method:

1. Automatically obtain the IP address and DNS settings of the local connection of the computer;

3. Connect the network cable from any LNA port of the cat to the WAN port of the wireless router, open the browser, enter, enter, enter the login username and password (the login username and password are indicated on the wireless router label), and OK.

4. Set up the wizard, next, select PPPoe dialing method, next step;

5. Enter the Internet access and password, next step;

6. Fill in the wireless network name in the SSID box, enable WPA-PSK WPA2-PSK encryption, enter at least 8-digit wireless password, and next;

7. Click Finish and restart the wireless router according to the prompts.

Haven't you heard that fiber optic Internet access is sometimes limited in length?

Even if there is a time limit, you connect the router yourself, and the router automatically dials in to log in to the Internet, how does the network provider know that there are several computers behind your router to access the Internet at the same time? It seems that the general network ** business can't find out.

Your current situation is that 3 computers dial up to access the Internet separately, and the network ** provider can certainly see the time you have spent online.

It is recommended that you understand the specific situation before deciding.

Add a router directly connected to the optical modem, all network cables are hung on the router, dial with the router, 24 hours a day, there are 3 hours left, I don't know how to use it!

Buy a wireless router.

Who told you that the superposition counts the time, and the one who smokes it directly.

This is usually due to the poor matching of the cave in the following situations

1. There is a problem with the optical interface of the optical modem, and the optical modem needs to be replaced.

2. The indoor pigtail connection optical cat connector is loose, and the connector can be restored by plugging it in.

3. The bending of the indoor part of the optical fiber is too large. Excessive bending of the optical fiber will affect the total reflection transmission of the optical signal in the optical fiber, as long as the optical fiber is straightened.

4. If the optical fiber of the outdoor part is broken or the optical port of the equipment in the computer room is faulty, you need to contact the staff for fault reporting.

Precautions for using Catlight:

1. Place the light cat steadily, pay attention to ventilation, moisture-proof, and do not fall.

2. The cable entering the home is a leather optical fiber, which cannot be made in a small circle or bent at 90 degrees, otherwise the attenuation will affect the Internet speed and even be unable to connect to the network.

3. Try not to move the position of the optical fiber plug and optical modem equipment, so as not to cause damage and attenuation of the access line.

4. The operating environment temperature of the optical modem connected to the optical fiber should not be higher than 45 degrees, and it is recommended to avoid high-power electrical equipment, such as refrigerators and air conditioners, so as not to interfere with the normal operation of the optical modem.

5. In case of failure, try to turn off the power of the modem for three seconds and then turn it back on.

There are many ways to solve the problem of insufficient optical modem interfaces, which are described in detail from the following aspects:

First, you can consider using a switch. A switch is a network device that connects multiple computers and allows them to communicate with each other. You can use a switch to expand the number of interfaces of the modem to meet more network connection requirements.

Switches are divided into ordinary switches and gigabit switches, users can choose different kinds of switches according to their actual needs, for example, if users need to transmit a large amount of data, they can choose gigabit switches, and if they only connect a few computers, they can use ordinary switches.

Second, consider using a router. A router is a network device that can connect one LAN to another LAN or WAN. Using a router allows multiple computers to share the same network connection, thus expanding the number of interfaces of optical modems.

In addition, network extension devices such as network extenders and bridges can be used. The network extension device can connect multiple LANs together to form a larger network, thereby expanding the number of interfaces of the modem. For example, two LANs can be connected using a bridge so that they can communicate with each other.

The selection of network expansion equipment should be based on the actual needs of the user.

In short, there are many ways to solve the problem of insufficient optical modem interfaces, and users can choose according to their actual situation. Whether you're using switches, routers, and network extension devices, you can meet your network connectivity needs. <>

If the indoor pigtail connection optical modem connector is loose or the contact is poor, in this case, the interface needs to be removed to clean up the lower disturbance and then plug it back in.

The bending of the indoor part of the optical fiber is too large, and the excessive bending of the optical fiber will affect the total reflection transmission of the optical signal in the optical fiber, in this case, only the optical fiber needs to be straightened.

If there is a hidden question about the optical interface of the optical modem, this is a hardware problem of the optical modem, and the optical modem can only be sent to customer service for repair or replaced with a new optical modem.

Broadband arrears, now Kuanzao Li broadband business is basically a postpaid model, operators will shut down broadband services due to customer arrears for too long, in this case only need to pay off the arrears.

Regional broadband failure, the entire area of broadband may be overhauled or out of fault in maintenance, in this case, you can call customer service ** to understand the situation, wait for the maintenance personnel to repair the broadband.

How is it not enough? It is enough to use only one interface for one account of the modem. It can be expanded with an external router.

There are also many types of fiber optic modems, and some fiber optic modems have 2-4 network cable ports. Although the fiber modem has 2-4 network cable ports, if only one is enabled, the other few are not enabled, so they cannot be used.

Fiber optic cat: refers to a cat that pon's fiber to the home. PON Cat is the terminal equipment ONU of EPON and GPON, which can realize the first-line opening of voice services, broadband Internet services and ITV digital TV services, and can be fully digital terminal equipment without adding any separator.

There is also a big difference in bandwidth rate, ADSL modem can only open up a maximum of 6Mbps due to copper cable transmission limitations, and ONU optical modem terminals can open up a maximum of 100Mbps at a rate determined by the user. The ADSL is a copper cable transmission, and the PON equipment is an optical fiber transmission.

To log in to the settings interface of the modem, check the free LAN port. If ITV or IPTV is enabled, one LAN will be occupied, and the other three LAN ports can be used.

The operator only gives you an opening.

1: The second port of the two-port cat is an ITV-specific interface, which will be retained even if there is no such service.

2: The first port of the four-port cat is a dedicated interface for ITV.

Solution: 1: Know the administrator password of the optical modem, this password is different for each user, and you need to query it in the maintenance background.

2: Log in to the modem management interface, delete the ITV data in the network settings interface, tick it directly, and then click Delete.

3: Just tick the port on the broadband data.

The operator corresponds to the parameter settings on your modem. If only one interface is delivered in the multi-port modem, the corresponding interface can only be used, and the other interfaces will be unavailable because there are no configured parameters, and then the situation you mentioned will appear.

Oh,Simple,The routing of optical modems is restricted,In fact, there are so many ports,Only one can be used,The others are IPTV,Reserved ports for smart cells, etc.。