The sticker already has a format, how to print the data on it, and what printer to use?

This kind of printing is called "nesting", which is to print accurately on the printing substrate of the existing content, and sometimes the content of each thing that needs to be printed is different, such as the progression of the number and batch number in the picture. The most common type is to put the delivery information on the express bill of the finished product.

Software: Search for the software to see a lot of printing software can be used, different software functions are different, the vast majority will charge a certain fee, you can try to buy a few at a low price.

Word itself can be typed, using the "mail" function (the name of the 2007 version), and the specific way can be searched on the Internet.

Hardware: Theoretically, any printer can be used, laser, inkjet, and dot matrix, but the printer is required to feed and position the paper well.

The diagram you give is printed using a dot matrix printer, and its advantage is that it avoids the problem of high requirements for printed paper from laser printers and poor waterproofness from inkjet printers. Moreover, there are two classifications in dot matrix printers that are specifically suitable for nesting, called: "passbook printer" and "flat push printer", the former is an upgraded version of the latter's thickness adaptation.

It is recommended that you buy a second-hand side push printer or passbook printer to use, the more classic model is the PR2 series, about 400-800 yuan a piece, very easy to use.

The steps to add paper format to the printer are as follows:

1. Take win7 as an example to enter the control panel.

2. Find the viewing device and printer in the control panel.

3. Enter the inspection device and printer.

4. Select the print you want to add paper to, and find the content of the print server.

5. Enter the server content.

6. Select Create New Content, and then fill in other options such as format name.

7. After the setting is completed, select the storage format, and you can save the paper format you just added for printing.

<>1. Click "Start" -- Settings -- Printer & Fax.

2. In the blank space, right-click the mouse, select "Server Properties", and click the left mouse button to confirm.

3. In the "Print Server Properties" window, mark the name "Create" before "Create New**", change the width and height of the paper size, save the format, and click OK.

4. Right-click on the selected printer, select "Properties", and select "Printing Preferences".

5. In the "Printing Preferences" tab, click "Advanced", select "Paper Specification", and in the drop-down list, select the paper name to set, and click OK.

6. Click "Device Settings", select "Rolling Paper Feeder", select "Paper Specification", select the paper name set in the drop-down list, and click OK. In this way, the printed paper is the required paper.

It's a simple question worth asking.

Tell you, click Start, Settings, Printer and Fax to open, right-click on the blank space, select Server Properties, check the Create New Format, and fill in the table name as old as you want; For example, half of A4 is the unit, which is the imperial system); The width below is: the height is left and right, and it doesn't matter if it's up and down; Then save it and it's OK

Open the Printers & Faxes management window in the Control Panel, right-click in the blank space, and select Server Properties. You can set it up right inside! You can also use the software that comes with the printer to set it up... Dot matrix printers are a little tricky to set up!

Hope it helps!