What is the problem of the mobile network operator s remote unresponsiveness?

1.Settings - Find "Application Manager" - (All) - Find apps that don't work - (Storage) - Clear data.

3.If you also get a stop prompt when you run the built-in program, check if your phone has the latest firmware version and upgrade your machine to the latest version.

If the problem persists, please bring the purchase invoice, repair card and machine to the Samsung service center for professional after-sales engineers to help test.

If the phone prompt is not responding, it is recommended:

1.Turn off your phone and restart it.

3.If this prompt persists, it is recommended to uninstall the third-party software that was operated before the phone became unresponsive.

4.Check if your phone has firmware system push notifications, and if so, upgrade your phone to the latest version. View by: Settings - (General More) - About Device - System Update - Update.

If the problem still exists, it is recommended that you bring the purchase invoice and the three-guarantee certificate to send the mobile phone to your nearest after-sales service center for testing.

There are many possibilities, different causes, and different solutions

1. There may be a problem with the router, as shown in the figure below, press the reset reset button for 8 seconds, and then reset it after factory reset.

2. The Internet access mode of the WAN port of the router is incorrect. Here's how to fix it:

1) Go to the router settings page.

2) Tap on "Advanced Settings".

3) Find "WAN Port Settings".

4) Choose the right way to surf the Internet.

5. Broadband and password are mistyped or not case-sensitive.

The solution is as follows: Enter the correct broadband account number and password, and pay attention to the case of the account password.

6. When the Internet access mode is automatically obtained, the IP obtained by the WAN port of the router conflicts with the IP of the LAN port of the router.

Summary. Hello! 1. Restart the cat, if there is a spare cat, it is recommended to replace the spare cat; 2. Restart the router, if it is useless, it is recommended to reset the router (restore factory settings), re-dial the network, if there is a spare router, it is recommended to re-dial the network after replacing the router; 3. Call the network operator and ask the other party to check whether the line is faulty, resulting in the server not responding.

Hello! 1. Restart the cat, if there is a spare cat, it is recommended to replace the spare cat; 2. Restart the router, if it is useless to destroy the vertical car, it is recommended to reset the router (restore factory settings), re-dial the network, if there is a spare router, it is recommended to re-dial the network after replacing the router; 3. Call the network operator and ask the other party to check whether the line is faulty, resulting in the server not responding.

It didn't work. Hello dear! You can do this in the following ways:

1. The SIM card of the mobile phone is in poor contact with the shrapnel of the mobile phone card slot, resulting in the failure of the SIM card circuit, and the inability of the mobile phone to communicate with the network base station. 2. Due to the incompatibility between the application software and the system for installation, the system software closes the modulation and detracking excitation modulator in the mobile phone signal processing circuit, at this time, the mobile phone can be turned off and then restarted, and the modem in the mobile phone signal circuit will be restarted, and after the signal is normal, delete the suspicious mobile phone application software installed before the problem; 3. If the SIM card of the mobile phone is not registered in the network, you can insert this SIM card into another mobile phone at this time, such as the lead wild fruit also shows no service as the reason for the SIM card; 4. If the SIM card of the mobile phone fails to reconnect to search the network after there is no signal in the network signal coverage area, you can manually search for network registration under the menu of Settings - General - Network - Network Operator; 5. If the signal coverage of the mobile phone SIM card network operator is not available, you can change the location to an open area, and then check the mobile phone signal grid display, if the display is normal after changing the location, you can call the network operator service ** for feedback and complaints.

If you don't connect to the Internet, it keeps showing that the network is being connected, and the communication diagnosis shows that the remote end of the network operator is not responding, what is going on and how to solve it?

Dear, hello, I am glad to answer for you whether you are connected to the Internet, has been displayed in the network, the communication diagnosis shows that the network operator has no response at the remote end, what is going on, how to solve it? Answer: If you don't connect to the Internet, it keeps showing that the network is being connected, and the communication diagnosis shows that the network operator has no response at the remote end, the details are as follows:

Turn off the router and the broadband modem, restart and restart to see if it can be restored to normal, if it still can't return to normal, observe whether the broadband cat has a red light flashing, if there is a red light flashing, it should be a problem with the external network, you need to contact the operator, let them send a master. Door repair, you yourself is not in a way.

Here are five ways to do this.

1. Solution:

Go to the router settings page, click "Advanced Settings" - WAN Port Settings - and select the correct way to access the Internet. Cause: The WAN port of the router is incorrectly selected for Internet access.

2. Solution:

Enter the correct broadband account number and password, and pay attention to the case of the account password. Cause: The account and password of Broadband were entered incorrectly, or were not case-sensitive.

3. Solution:Fourth, the solution:5. Solution:

Modify the WAN port rate of the router to 10 Mbit/s full-duplex. Cause: The broadband line of the home is too long, resulting in insufficient driving capacity.

Turn off the device for 10 minutes and restart it, if it doesn't solve the problem, call customer service to report the fault.

Cause 1: The WAN port of the router is incorrectly selected for Internet access.

Solution: Go to the router settings page, click "Advanced Settings" - "WAN Port Settings" to select the correct Internet access method.

Cause 2: The broadband account and password are entered incorrectly or are not case-sensitiveSolution: Enter the correct broadband account and password, and pay attention to the case of the account password.

Cause 5: The broadband line of the home is too long, resulting in insufficient driving capacity.

Solution: Change the WAN port rate of the router to 10M full-duplex.

The remote unresponsiveness of the network operator can be solved from the following aspects:

1. If the Internet access method is wrong, go to the router settings page and select the correct Internet access method.

2. If the broadband password is entered incorrectly, re-enter the correct broadband account and password, and pay attention to distinguish the case of the account password.

3. If the network port of the router is damaged, modify the LAN port address of the router to solve the problem.

4. The router address is wrong, clone the MAC address on the computer that can access the Internet normally without connecting the router to solve the problem.

5. Confirm whether your network cable line is normal, that is, insert the network cable into the network card of your computer, whether the local connection is red cross, if the red cross is played, it means that the line is a problem, if there is no red cross, it is generally caused by the user name and password are not entered correctly.

6. It is recommended that you try to dial in directly, if the broadband connection can access the Internet, but the router is reported as an error, reset the router or replace it with a new router.

There are many possibilities, different causes, and different solutions

1. Anti-virus software, try it after turning it off;

2. If there is a problem with the router, reset it after factory reset;

3. The power supply of the router is unstable;

4. The Internet access mode of the WAN port of the router is selected incorrectly;

5. The broadband account and password are entered incorrectly or are not case-sensitive;

6. When the Internet access mode is automatically obtained, the IP obtained by the WAN port of the router conflicts with the IP of the LAN port of the router.

7. The network broadband operator binds the broadband account to the MAC address of the computer;

8. The broadband line of the home is too long, resulting in insufficient driving capacity.

Here's how to fix it:

The fourth reason solution: Go to the router settings page, click "Advanced Settings" - "WAN Port Settings" to select the correct way to access the Internet.

The fifth reason solution: Enter the correct broadband account number and password, and pay attention to the case of the account password.

Cause 8 solution: Change the WAN port rate of the router to 10M full-duplex.

If your mobile phone cannot access the Internet normally, please check the following conditions:

1. If you don't restart your phone after upgrading to 4G**, you won't be able to use the Internet function normally;

2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;

3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;

4. After 3-5 minutes of power off, restart the phone and try again;

5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

6. If the traffic usage reaches the maximum value in the current month, the network will be automatically closed, it is recommended that you pay attention to our SMS reminder or inquire about the **product description.

Here are five ways to do this.

1. Solution:

Go to the router settings page, click "Advanced Settings" - WAN Port Settings - and select the correct way to access the Internet. Cause: The WAN port of the router is incorrectly selected for Internet access.

2. Solution:

Enter the correct broadband account number and password, and pay attention to the case of the account password. Cause: The account and password of Broadband were entered incorrectly, or were not case-sensitive.

3. Solution:

Fourth, the solution:

5. Solution:

Modify the WAN port rate of the router to 10 Mbit/s full-duplex. Cause: The broadband line of the home is too long, resulting in insufficient driving capacity.

If the direct-connected modem can connect to the Internet, there is a problem with the router, and replace the router immediately.

If your router cannot be connected to the network after setting, please log in to the router interface, click "Advanced Settings" - "System Status (or Running Status)" to check what the connection status of the WAN port connection is, please check the following troubleshooting methods according to your WAN connection status:

The WAN port displays the solution to the failure of the connection.

The WAN port displays the troubleshooting method in the connection.

The WAN port shows that it is connected but cannot connect to the network.

Hello! Hopefully, the following methods can help you. If your router cannot be connected to the network after setting, please log in to the router interface, click "Advanced Settings" - "System Status (or Running Status)" to check what the connection status of the WAN port connection is, please check the following troubleshooting methods according to your WAN connection status:

The WAN port displays the solution to the failure of the connection.

The WAN port displays the troubleshooting method in the connection.

The WAN port shows that it is connected but cannot connect to the network.