How to boost your phone s 4G signal, how to boost your phone s 4G signal

If you have an unstable or bad signal on your phone, it is recommended that you:

1.It may be that the signal coverage of your location is poor, and it is recommended that you restart your phone or try it in a different location.

3.If it doesn't work, please turn it off, take out the SIM card, and try to reinsert it.

4.Replace it with a different SIM card.

If the problem still exists after the above operation, it is recommended that you bring the purchase invoice, three-guarantee voucher and mobile phone to the local service center for testing by the engineer.

The 4G signal strength is determined by the coverage of the local operator's equipment, and the user cannot improve it by himself.

If users need a better telecom 4G, they can choose a mobile phone with good signal acceptance ability, or use it in an open place such as a window.

4G+ is the use of new carrier aggregation technology, the 4G network speed to further improve the mobile network standard, the three major domestic operators have achieved 4G+ network commercialization, mobile phone display 4G+, indicating that the mobile phone supports 4G+, and the signal has been covered to the local area.

Mobile 4G SIM phones define two units of representation for signals, one is DBM and the other is ASU.

We usually mention the most is the dBm representation method, in the case of no problem with the hardware of the mobile phone, the signal strength value between -75dBm and -85dBm is within the normal range, and the mobile phone will not have problems answering and dialing ** within this value. When the signal strength value is between -85dbm and -95dbm, the number of mobile phone signal cells is often no longer full, but mobile phone calls are still no problem.

And when the value is between -100dbm and -110dbm, the signal of the mobile phone has been relatively weak, and if the user dials ** at this time, it happens to encounter the situation that the mobile phone call is interrupted when moving from a signal base station to another signal base station.

The mobile phone below -110dbm is basically in a state of no service, and the dial ** will definitely be dropped.

There are two main factors that determine the mobile phone signal:

1. It is the level of software and hardware of the mobile phone itself;

2. It is the operator chosen by the user;

Steps to check cell phone signal strength:

Open the phone menu, find the [About Phone] item at the bottom of [Settings], and you can check the real-time signal strength in the [Status] option.

If you are using a Huawei phone and the number of signal bars in the status bar of your phone is high or low, we recommend that you take the following steps to solve the problem:

1.Avoid using magnetic metal cases, magnetic stands, or magnetic chucks.

Metals and magnetic materials can easily interfere with the signal, resulting in poor mobile phone signals.

2.Please try to change to another SIM card.

It is recommended that you install other mobile phone cards into your mobile phone to view, if the signal display of other mobile phone cards is normal, it may be that there is a problem with your mobile phone card, it is recommended that you go to the operator's business office to replace a new mobile phone card.

3.Please try moving to your current location.

1) In some closed indoor environments, such as houses with dense spacing between buildings, the mobile phone signal may be blocked, resulting in poor signal. You can get outside to see if your phone signal is back to normal.

2) The degree of network coverage of operators varies according to different regions, and urban areas basically meet the coverage, but some remote areas may have insufficient coverage capacity, which will lead to poor mobile phone signal.

You can determine whether the poor mobile phone signal is caused by the current regional network coverage by whether the mobile phone signal is poor when you are only in the same area, or whether the mobile phone with the same carrier** card in the vicinity also has poor signal.

4.Check that the APN settings are correct.

Incorrect APN settings will affect the normal use of the network.

Method 1: aClick Settings;

c.Click on the APN name (APN) to go to the APN page.

d.Turn on the three dots button in the upper right corner;

e.Click Reset to default.

Method 2: If your phone is EMUI and above or Magic UI and above, or HarmonyOS and above, you can also follow the steps below:

a.Click Settings;

b.Tap Mobile network, then tap Mobile data;

c.Click on the APN name (APN) on the Mobile Data page to go to the APN page.

d.Turn on the three dots button in the upper right corner;

e.Click Reset to default.

Settings > Wireless & Networks > Mobile Networks > Access Point Name (APN) > turn on the three dot buttons in the upper right corner > reset to default.

5.Please try to reset the network settings.

If the above troubleshooting does not resolve your issue, we recommend that you contact Huawei Consumer Service** (950800) for further assistance, or back up your data in advance (WeChat QQ and other apps need to be backed up separately), and bring your purchase voucher to a Huawei customer service center near you.

Enter the About Phone interface of the mobile phone settings, click on the status and information of the interface, and then click on the network to clearly see the signal strength; 2. Open the [**] of the mobile phone and select [Dial Pad]; 3. Enter the ** of the corresponding model of your mobile phone in the keyboard to enter the mobile phone [engineering mode], which is generally a combination of * and numbers;4. After entering the engineering mode, select [Mobile Phone Information] - [Preferred Network Type].5. Select [LTE ONLY], the data network of the mobile phone will be disconnected and reconnected, and the mobile phone will automatically lock the 4G signal, and will not switch to the 3G 2G network due to poor signalOf course, if you're in an area or if your phone's 4G signal is good, this won't improve your internet speed

The above is the introduction of the mobile phone to enhance the 4G signal, sometimes the signal of the mobile phone is not good is a common phenomenon of the operator in the current region, if you often encounter a bad signal in a certain area, it is recommended to call the operator service ** feedback.

1. Prepare a headset and plug the headset into the headset, then you will find that the signal grid of the signal bar has increased again. 2. When you find that the signal is not good, you can move it and find a place with a better signal. 3. Place the keychain straight on the table and place the phone next to the keychain, here you will find that the signal in the signal bar has increased.

4. Make an antenna ring with iron wire, and put the mobile phone in the antenna ring to increase the signal. 5. Manually select the connection settings of the mobile network, switch the APN access point, and remember to save the settings when finished.

This is a more direct method, and it also has something to do with the operator of your SIM card, some places will be a little stronger, and some places will be stronger. You have to look at the region you are in, which signal will be stronger, buy the corresponding SIM card directly, isn't it possible to port the number to the network now?You can go to the home carrier with the strong signal.

Improve the reception position of the mobile **, such as you can climb to a higher place to receive the signal, preferably closer to the side of the transmitting equipment of the mobile company;

Holding the phone in a way that may interfere with the mobile signal, avoid blocking the phone's antenna when holding the handset to ensure that the signal is not blocked;

If you live in a basement or in a rural area with little mobile coverage, you can contact your network provider to see if a signal booster is available.

Turn off data roaming and data calls while in use. And choose a place with a good signal for use, and the signal in some areas is not very good.

Quickly boost your cell phone signal, as long as this trick, you know?

1. Turn off and restart your phone.

The easiest way is to restart the phone, so that you can search and connect to the network signal again, and many times some small problems with the phone can be solved by just restarting it! If you feel that restarting is more time-consuming, you can also turn on the airplane mode of your phone and then turn it off, the same is true

2. Turn off the 4G of the mobile phone

Now is the 4G era, many people's mobile phone network settings will give priority to the 4G network, but when we encounter a bad signal, we can first temporarily turn off the 4G network of the mobile phone, turn off [Enable 4G] in the [Settings] - [Cellular Mobile Network] - [Cellular Mobile Data Options] of the iPhone mobile phone, select the 3G network, then the signal will become better.

Of course, this method is only suitable for situations where you are in a hurry to hit ** in a short period of time, after all, it is unlikely to be connected to the 3G network all the time.

3. Manually select the operator.

We can also turn off [Auto] in [Settings] - Cellular Network - Network Selection] on the iPhone, and manually select the carrier by ourselves, which can temporarily change our signal problems.

4. Set the single-card mode.

This method is for the dual SIM mobile phone in the iPhone, when we encounter a bad signal, we can temporarily set the mobile phone to single SIM mode in the settings, single SIM is much faster than dual SIM when searching for signals, so to a certain extent, it can also solve the signal problem of our mobile phone.

5. Reset the mobile network settings.

If none of the above works, then try again! Click [Reset Network Settings] in [Settings] - General], which is to clear the network data in our previous mobile phone and re-search the network signal, the data stored by the mobile phone will not disappear, but you need to re-enter the password when you want to connect to WiFi.

How to enhance the four-G signal on my mobile phone, I think you can wear it if you stand higher in some better places.

If your Apple phone wants to enhance its own four-G signal network, in fact, there is no way to enhance your own four-G signal network, but if you are in the countryside, the signal and network strength in the city will be different. You can find a place with a lot of concentration.

How can a mobile phone boost the signal of 4G? Speaking of words, if you call the Apple mobile phone, you tune it into the machine of the world, and he is all 4G numbers.

That's not to be done, you have to change the phone, the current Apple uses the mobile phone and its signal is very good, because its latest Apple mobile phone uses Qualcomm's machine communication skills, the signal is particularly stable, the old Apple mobile phones used are Inter Int, the signal is particularly rubbish, this is Apple's biggest weakness.

If you want to enhance the design number, you must first have a strong signal under the signal tower.

If there is no signal on the iPhone 4G, you can turn on the airplane mode and turn it off again to see if it can return to normal.

The 4G signal cannot be boosted. Because you're going to modify your phone. There is no need to do this. It's easy to break your iPhone.

If you want to boost the signal of 4G, you can use the mobile phone booster.

3. Turn off the operator's [Auto] button, wait for about 10 seconds, and the name of the surrounding operator will be searched below, if it is mobile, select [China Mobile], if it is Unicom, select [China Unicom]. See if the signal has changed.

If you want to boost the 4G signal on your iPhone, it is recommended that you go to a place close to the signal tower, or find a relatively open place, and the signal will be relatively better.

If you want to increase the signal, you should delete unnecessary things as much as possible.

How does the iPhone increase?4G signal. If the iPhone is four. Very high-tech phone. If you won't get it. Li Ke. Go downstairs. Mobile phone stores. The front desk attendant helps you out.

The general way to boost the signal is that you can take your phone from one place and send it to another, and the signal will become stronger.

If you want to enhance your consciousness, you can do it directly from the official website.

I think this kind of thing is generally to choose a faster network speed, in fact, I don't think there is a way to enhance this thing, unless you want to use a signal enhancement device.

There is no way to do this, the poor signal of Apple's mobile phone is recognized, so it is impossible to achieve enhanced signal.

Hello, the iPhone phone, as long as it is in some places with fewer housing areas, the signal is better.

It is good to choose the area where Dunhua Si is located and choose a place with a good signal.

Of course, this is to find a place with a strong signal, or to handle something**.

I have many friends who use Apple mobile phones, and they have complained to me that the signal of Apple mobile phones is relatively poor. In fact, the mobile phone signal is not good, there are only two reasons, the first is the mobile phone baseband problem; Second, the influence of the surrounding environment on the mobile phone signal. Today, Xiaoke will share some ways to improve the signal of Apple mobile phones, let's take a look!

First, the base station problem.

There is no good way to deal with the baseband problem (if you change the phone), but I know how to check the baseband model of the Apple phone.

First, open the dialpad on your phone, then enter [*3001*], and then press the dial key. We can see the base station model of our mobile phone. "main menu"Stands for Intel Baseband,"field test"Stands for Qualcomm baseband.

As we all know, the signal of Qualcomm baseband is much better than that of Intel baseband.

Other solutions.

Regarding the problem of the baseband of the mobile phone, Xiaoke really does not have any good solutions, but there are other ways to restore the signal and improve the network speed.

Sometimes the Apple mobile phone network is not good because the signal connected to the base station is not strong. At this time, we can turn on and off [Cellular Network Search] to re-search for nearby base stations, so as to enhance the signal and network.

2) Reset network settings.

Sometimes the poor signal and network of the Apple mobile phone may also be caused by the local network cache, and the reset network settings function can clear the local network cache of the mobile phone, but it will also clear the wifi password, so be prepared before the operation.

Steps: Settings - General - Restore - Reset Network Settings.

If you feel that your iPhone has a poor signal, you may wish to try the above methods.