Do you need to top the yellow peel fruit when it blooms, and what is the reason why the yellow peel

Yellow peel needs to be peeled off from the interfloral knot.

Yellow peel fruit. Prune dead branches, diseased branches, shade branches, and dense weak branches before spring flowering to ensure ventilation and light transmission. After fruit picking, the fruit branches are cut off in time to promote the germination of autumn shoots, and the weak branches are thinned from the base, and the general leaves a few strong buds at the base and then cut them short.

Fruiting trees are thoroughly pruned immediately after fruit harvesting to promote neat budding. The fruiting mother branch was shortened, the fruit spike at the top of the fruiting branch was pruned, and the dead branches, diseased branches and weakened branches were removed. Reasonable shaping of the tree, such as the use of pressure top to open the skylight, the retraction and pruning of the long branches, and the removal of overly dense branch tips to form a good round-headed tree shape. After about 10 days of plastic pruning, that is, before and after the beginning of autumn, the branches begin to sprout and extract the autumn shoots, especially the branches that have been stubbed and treated with more buds, select the top two buds, and the rest are all erased, which is conducive to concentrating nutrients and extracting strong branches.

Due to the strong growth advantage of the top of the autumn shoots of yellow skin, according to the practice of fruit farmers, the topping treatment of autumn shoots in a timely manner to break the top advantage can promote the second late autumn shoots and increase the total amount of autumn shoots. At the same time, through topping, the branches can also be short, strong and compact, the crown dwarfing, and promote more flowers and fruits, the specific topping method is: after the yellow peel is picked, leave 2-3 compound leaves on the fruiting branches for shortening, promote their early autumn shoots, and let the fruitless branches that do not affect the tree shape spontaneously grow autumn shoots. When the second autumn shoot grows 6-8 compound leaves, the length is 13-15 cm, and the base stem is as thick as the head of chopsticks.

Keep 5-6 compound leaves, early picking to keep short, late picking to keep long. Depending on the early and late growth rate of the first autumn shoots, topping can be carried out in batches, but no later than late September. Yellow peel topping must be combined with fertilization in order to extract the second autumn shoots in a short time.

The first time was applied immediately after fruit picking, and the second time was applied after the first batch of autumn shoots were topped. Fertilization was mainly based on fast-acting nitrogen fertilizer, and 200 kg of human and animal manure water and 3 kg of compound fertilizer were applied to each plant. After the new secondary autumn shoots grow 6-8 compound leaves, spray foliar fertilizers such as potassium dihydrogen phosphate once, and spray together with disease and insect removal, so as to facilitate the healthy growth of autumn shoots and enhance stress resistance.

The reason why the yellow-barked fruit tree does not bloom

It may be because the fertilizer and water are not enough, the light temperature is unreasonable, the soil layer is not suitable or the bud promotion is not in place. Fertilizer and water** should be ensured to be abundant. Ensure sufficient sunlight exposure time, keep the temperature above 20, and do a good job of promoting buds, and apply pesticides appropriately.

Yellow-barked fruit trees do not bloom, generally not at the flowering age, and are in the young plant link. Generally, the flowering period is after the autumn shoots are ripe. Branches that do not sprout new shoots and immature autumn shoots generally do not undergo flower bud differentiation and do not bear fruit.

After the autumn shoots are ripe, as long as the temperature and moisture are suitable to meet the flower bud differentiation, it is generally in December and January of the following year. Fresh winter shoots can be appropriately removed; to promote flower bud differentiation.

In the flower bud differentiation stage, it is necessary to reduce watering and fertilization to promote the branches to enter the dormant mode, which is beneficial to the flower bud differentiation. Flower buds divide the nutrients and growth of the trunk, mainly with the help of spring and autumn shoots. Therefore, the pruning of yellow-bark fruit trees should be light and not heavy, so as to prevent the flower branches from being cut by mistake and causing them to fail to bloom.

The flowers of the yellow-barked fruit tree are mostly unisexual and dioecious, and most of them only bloom and do not bear fruit if they are solitary plants.

Fertilizer and water are not enough

The reason why the yellow-barked fruit tree does not bloom is likely to be due to the lack of nutrients in fertilizer and water, the yellow-barked fruit tree does not get enough water and nutrients, and is in a long-term lack of nutrients, or too much ammonia fertilizer is used to promote the steep growth of the plant's branches, which in turn causes the yellow-barked fruit tree to not bloom.

The light temperature is unreasonable

The failure of the yellow peel fruit tree to bloom may also be caused by unreasonable light and temperature. Under normal conditions, the yellow-barked fruit tree needs to ensure at least 4 hours of light time per day, and if it is the fruiting period, it needs to be increased, and the temperature during the flowering period also needs to be above 20, so that the yellow-bark fruit tree can bear fruit.

The soil layer is not in place

The unhealthy soil layer is also one of the reasons why the yellow-barked fruit tree does not bloom. The soil for planting yellow-bark fruit trees requires a loose and porous structure, reasonable drainage and good air permeability, and the overall pH is slightly acidic and alkaline, salinized, agglomerate, stiff, and poor soil is not able to make yellow-bark fruit trees bloom.

Bud promotion is not in place

From December to January of the following year, the yellow peel fruit tree will slowly differentiate into flower buds, the number of flower buds, the differentiation speed and the health of the flower branches, etc., in order to ensure the growth of the yellow peel fruit tree, it is also necessary to spray some paclobutrazol for the yellow peel fruit tree at the end of November to promote budding.

The yellow peel fruit has not all bloomed, can the fruit be preserved?

Hello, dear, in view of the flowering period of the yellow peel fruit is 7 September, so it can still be properly preserved when it has not yet fully bloomed. There are usually two methods for preserving yellow peel fruits: the number of buds picked and the number of knots left.

If the early leakage adopts the method of picking nodes, it is necessary to select the top or sub-top 3 or 4 flowers in each inflorescence when the flowering rate of the yellow peel fruit reaches 60% to 70%, and gently remove the remaining flowers. If the knots method is used, you need to select the top 1-2 flowers in the inflorescence and gently pluck the flowers hanging below.

OK.

Planting steps. First, the selection of yellow skin varieties: at present, the main cultivated varieties are chicken heart yellow skin, selected large chicken heart yellow skin, etc.

Planting steps. Second, the requirements of the yellow bark tree environment:

1. Temperature requirements: the temperature is above the annual average temperature of 20, and the average temperature in January is more than 12 The area is the most suitable, and the temperature is below 0 The adult tree will be frost damaged, and the cold resistance of the young tree is also poor.

2. Water requirements: Yellow bark is an evergreen fruit tree, which needs a moist environment and sufficient water, and grows well in areas with annual rainfall of more than 1500 mm and evenly distributed.

3. Light requirements: sufficient light, the branches and leaves in the crown can absorb scattered light for photosynthesis, expand the photosynthetic area, enhance the accumulation of tree nutrients, expand the fruit-bearing area, and improve the quality and yield of fruits; Insufficient light affects plant photosynthesis and nutrient accumulation, which is not conducive to plant growth and development.

4. Soil requirements: Yellow bark does not have high requirements for soil, clay loam and sandy loam can be planted, but different soils will have different impacts on the life and yield of yellow bark plants. Planting yellow bark on clayey heavy soil with thin soil, poor drainage and irrigation, and stagnant water will have a short life span and low yield.

Planting steps. 3. Planting of yellow bark trees

1. The planting time of the yellow bark tree: generally from March to May, when there is more rain, the temperature rises, it is easy to take root, and the survival rate of the plant is high. When the nutrient bag seedlings are transplanted, the root system is less affected, and the garden with irrigation conditions can be planted in spring, summer, autumn and winter.

2. The planting density of yellow bark trees: generally 50-80 plants per mu, and the row spacing of the plants can be 3 meters, 4 meters or meters. When planning dense planting, about 110 plants are planted per mu, and the row spacing of plants can be 2 meters to 3 meters.

According to the length and width of 1 meter, deep meters of the specifications of digging holes, each hole buried 50 kg of green manure, 50 kg of soil miscellaneous fertilizer, 500 grams of lime, 500 grams of phosphate fertilizer, backfill topsoil should be about 20 cm above the ground.

3. Precautions for planting yellow bark trees: the roots of yellow bark seedlings should avoid contact with fertilizer, the seedlings should be kept upright, the root system should be naturally stretched around, and the depth should be covered with fine soil to the root neck.

The yellow peel fruit is a common fruit tree that generally blooms in spring. If it rains during flowering, it may have an impact on pollen dispersal and pollination. Specifically, the Lower Town Trail Rainy Weather reduces dust and impurities in the air, which helps pollen spread through the air and fall on the pistils of other plants.

However, if it rains for too long or too much, the flowers of fruit trees such as yellowbark fruit can become moist, which may cause pollen to become damp, inactive or rotten, which can affect pollination. In addition, strong winds or cold air during the rainfall may cause flower buds to shrink, wither or freeze.

Therefore, in general, a moderate amount of rainfall is beneficial for the growth and development of fruit trees such as yellow peel fruit during flowering. However, if the continuous heavy rain is too long, it is not conducive to the normal growth and development of fruit trees such as yellow peel fruit.

Summary. Hello, after the yellow bark tree blooms, you need to pay attention to the addition of fertilizer, the cutting of flower spikes, the control of watering, and the thinning of flowers and fruits. After the flower spike appears, it is necessary to add flower fertilizer in time, cut off the spike tips that are obviously not as good as other flower spikes and seedless yellow skin, water without leaving standing water, and cut off the flowers and fruits that do not grow well.

Hello, after the yellow bark tree blooms, you need to pay attention to the addition of fertilizer, the cutting of flower spikes, the control of watering, and the thinning of flowers and fruits. After the flower dust spike appears, it is necessary to add strong flower fertilizer in time, cut off the spike tip that is obviously not as good as other flower spikes and seedless yellow skin, water without leaving stagnant water, and cut off the flowers and fruits that are not growing well to cover them.

Yellow bark tree flowering treatment method 1, additional fertilizer After the flower spike appears, it is necessary to start the treatment of top dressing of the yellow bark tree. According to the growth state of the yellow bark tree, the formula of the fertilizer should also make some changes, only use a little phosphorus and potassium fertilizer and calcium and magnesium and other trace elements when the growth is good, and the growth is not very good, you need to use nitrogen, phosphorus and potassium loose hands such as compound fertilizer, pay attention to thin fertilizer diligently. 2. Cutting flower spikes According to the different growth states and varieties of yellow bark trees, flower spikes also need to be cut.

The flower spikes of seedless yellow bark are relatively long, sometimes they can grow to about 25 cm, but the side spikes are relatively scattered, which will lead to uneven flowering, so it is necessary to cut off part of the spike tips before the seedless yellow bark blooms to ensure the state of the flowers. 3. Watering control of the yellow bark tree in the flowering and fruiting period, because the water consumed by the flowers is much more aggravated than usual, so the watering must be watered thoroughly to keep the soil in a slightly moist state for a long time, but also pay attention to the characteristics of the yellow bark is not resistant to waterlogging, there can be no stagnant water residue when watering, and the water should be properly controlled before the fruit is ripe. 4. Although the number of flowers produced by the yellow bark tree is relatively large, and the number of fruits let out by the potatoes will be more, but not all of them can be left, and those flowers that do not grow well and grow poorly should be selected during the flowering period, and they will be cut off, and the weak and thin useless fruits should be cut off during the fruit period, so as to save nutrients for other flowers and fruits.

I planted the ** peel fruit seedlings in April last year, and now some of the seedlings are about to bloom and there are a lot of flower spikes, what should I do?

Hello, just follow the above method to deal with it.

The saplings are still very small, some only have two branches, and some have only one main branch about a meter high.

Probably. It can be pruned properly, and the first year does not give much thought to the problem of leaving fruit.

If you don't leave fruit, do you cut off the flower teeth?

Cut off part of the spike tip to ensure the condition of the flower.

Don't you finish cutting the flower spikes?

If you don't finish cutting it, you can trim a lot of it.

<>1. The yellow peel fruit blooms from April to May, and bears fruit from July to August.

2. Yellow skin scientific name: clausena lansium (lour. Skeels Rutaceae, small trees that can reach up to 12 meters in height.

leaflets ovate or ovate-elliptic, asymmetrical on both sides, panicles apical; The flower buds are round and spherical, the calyx lobes are broadly ovate, the petals are oblong, the filaments are linear, the fruit is pale yellow to dark yellow, the flesh is milky white, translucent.

If you want it to bloom as soon as possible, you can remove the newly grown winter shoots, and the flower buds are generally in December to January of the second year, which can effectively promote its flowering. In the middle of November, paclobutrazol can be sprayed, which can promote flower bud differentiation well. Hope mine is helpful to you.