-
Hello. We apologize for the inconvenience.
If you have other wireless networks nearby, please try to compare:
a. Other networks can be connected normally, you can judge that the mobile phone system and hardware function are normal, please try as follows:
1. Wireless network availability: It is recommended that you use other devices to connect to the wireless network, compare whether you can connect to the Internet normally, if you can't connect normally, it is recommended to re-set the wireless network, such as changing the channel, encryption mode, etc.;
2. Whether dial-up is required: some telecom network users use ADSL to access the Internet, and need to dial up to verify their identity through PPPoE, and the mobile device cannot be verified, so it cannot be connected to the Internet, and you can contact Telecom customer service (Telecom customer service**: 10000) for further consultation;
3. Number of wireless network connections: It is possible that there are too many users using the current network connection, resulting in the inability to use the network normally, so it is recommended to try it during idle periods;
4. Wireless network signal: When the wireless signal signal is weak, it may lead to the inability to connect normally or the application cannot be connected to the network normally, it is recommended to move the mobile device to a strong wireless network signal to try;
5. Wireless network restrictions: Some network service providers or network departments will restrict the use of wireless networks, such as binding the MAC address of the device that can be used, and it is recommended that you check with the corresponding network service provider or management personnel;
6. Wireless network in public places: If you are visiting the wireless network provided by the merchant or the operator, you may need to verify additional user name or authentication code and other information, usually after successful connection, you can open the browser and enter the corresponding user name and password to use it normally, it is recommended to consult the customer service of the merchant and the operator for specific conditions;
7. If the above suggestions still cannot be improved, it is not excluded that the compatibility between the routing equipment and the product is caused, and it is recommended that you replace the wireless network or routing equipment for use;
b. If other networks cannot be used normally after being connected, it may be caused by abnormal system or hardware functions
1. Please back up the fuselage data for a factory reset attempt (Main Menu - System Settings - Backup & Reset - Factory Reset - Reset Phone);
2. If it still cannot be improved after recovery, please take the time to go to the local maintenance site to test and process the system and hardware.
If the conditions are limited and you cannot compare with other wireless networks, it is recommended that you conduct a simple investigation based on the above suggestions, and if it cannot be improved, please send it to the repair site in time.
You can access:
Find the nearest site. The business hours of the maintenance site are usually from 9:00 to 18:00 from Monday to Sunday, except for holidays, and the stations will be slightly adjusted according to their own operations.
You are welcome to contact us or visit Lenovo at any time
Consult to find out.
-
Hello. For convenience, it is recommended that you go to Lenovo's service station to inquire about the diagnosis of the problem, the maintenance is free of charge during the warranty period, the main components are guaranteed for 2 years, the system and software are guaranteed for 1 year, foreign licensed goods need to register for IWS global warranty, and the choice of service station can be queried:
Other questions can also be compared in these two forums, idea forum, think forum:
Hope it helps, thank you.
-
I've had the same problem, it's not usually a setup, you try it with a wireless router.
-
Right-click on the online neighbor, click on the computer-shaped icon, and enter the account number and password.
-
Or you can turn on wifi, which is the sector symbol in the drop-down button, or you can find it in the system settings.
-
Click the up and down arrows which button in the message dialog box.
-
Hello. Go to System Settings - Wireless & Network - WLAN Settings (On), then click on the wifi signal you want to connect to, enter the correct password and then you can surf the Internet. For network signals such as CMCC or Chinanet, it is recommended that you can directly contact the corresponding operator and request the password, and then enter it to use.
If you have other questions in the follow-up use process, you are welcome to contact us at any time or visit Lenovo Lewen (
Consult to find out.
-
Wi-Fi Internet access needs to be connected to a wireless router, and the password is set by the wireless router when connecting to the network cable, so you need to know the password of the router to access the Internet!!
The SSID is the identifier of the service set, which can be searched for details!!
-
You can also use the broadband at home, dear! Just buy a wireless router and you're good to go. One is probably more than 100.
-
If the password is set or something, or can't be connected, just reset your route, my tablet has this situation, can connect to other wifi, can connect to mobile phone hotspot, is the home wifi can not be connected, after the route is charged. It may be a small bug in Android, and there is no solution at the moment.
-
1. The wifi icon in the status bar is highlighted; If the icon is highlighted, it means that it is connected to a WiFi network; If the icon is gray, it means that it is not connected to a WiFi network; Also know the network signal strength of the wifi.
2. If you are not connected to WiFi, go to Settings - > Wireless & Network - > WLAN Settings - > Menu Key - > Advanced and confirm whether "Static IP" is checked. (Normally, it is not necessary to set it to a static IP).
Lenovo asked:
-
1. Data traffic Internet access
If your mobile phone card has enabled the data traffic Internet access function and** (China Unicom 2G, China Unicom 3G), you can enter the main menu of your mobile phone - System Settings - SIM card management - Data connection - open to turn on this switch, and then you can apply for networking.
2. Wifi Internet access
You can go to System Settings - WLAN Settings - Open - WLAN Settings - Find the network you want to connect to - click Enter Verification Password - Click Connect to access.
Please understand and try the above.
You are welcome to contact us or visit Lenovo at any time
Consult to find out.
-
You can access the Internet with WIFI, GPRS Internet access, and 3G Unicom
-
Hello. If you need to use Wi-Fi, the device needs to be covered by Wi-Fi and log in with the corresponding account and password.
If you are connected to home broadband and use a wireless router at the same time, set the wireless account and password in the wireless router settings menu (the account must be English characters, the password must be more than 8 digits, you can refer to the wireless router manual), enter the device menu: "Settings - Wireless and Network - WLAN Settings" to turn on the wireless function, click "WLAN Settings" to select the name of the wireless network that needs to be connected in the scan list that appears, click Connect, enter the password, and OK.
If you are connected to a public network (such as a public network such as CMCC or Chinanet), or in scenarios such as McDonald's or airports, you need to obtain an additional username or authentication code to access the website.
You are welcome to contact us at any time or visit Lenovo Lewen (for consultation.
-
Dear Lenovo users, hello!
Hello. For convenience, it is recommended that you go to Lenovo's service station to inquire about the diagnosis of the problem, the maintenance is free of charge during the warranty period, the main components are guaranteed for 2 years, the system and software are guaranteed for 1 year, foreign licensed goods need to register for IWS global warranty, and the choice of service station can be queried:
Other questions can also be compared in the two forums, the idea forum.
Think Forum:
-
If you want to connect to a normal WiFi network, you just need to enter the system settings --- WLAN, find the name of the WiFi hotspot next to you, and click to enter the password.
-
Lenovo P700After connecting to WLAN,There is no IP bar setting,Only password input field,If you want to enter the IP bar setting, you don't know how to click in。
-
Very simple! First of all, you ask the mobile phone to open the wifi**rough shed, and then connect to the network in the place where there is a cmcc to log in to the browser, at this time the browser will automatically jump to the login wifi network**You only need to enter the mobile phone number in the input bar, the mobile phone can receive verification SMS, and then enter the verification code on the computer to connect to the wifi network.
1.Lenovo P700 uses MTK processor, with a frequency of 1GHz, with 512M RAM memory, 4G ROM storage space and Android system, and the performance is mainstream. In terms of screen, it adopts an inch 480*800 resolution 16 million color IPS screen, with good display effect, and is equipped with a 5 million pixel camera, which can bring good photo effects and meet your daily application and entertainment use. >>>More
Hello. If your device does not respond when you click the power button and does not turn on, we recommend that you perform the following steps to troubleshoot the device: >>>More
1. Too much program cache: in the mobile phone settings - application - all - find the program that stops running - clean up the data; (Most of them can be solved with this method). >>>More
It is recommended that the battery be re-seated before trying to boot, if it is still abnormal, please send it to the repair site for specific testing and treatment in time. >>>More
Lenovo P700i is equipped with a 5 million (rear) + 300,000 (front) pixel camera, which can bring good photo effects and can meet your daily application entertainment use, please understand. >>>More