How to maintain industrial dehumidifiers?

Dehumidifier Care & Maintenance 1The condenser should be cleaned from time to time to keep it clean. 2.

The dehumidifier should be placed indoors**. 3.The air inlet and outlet of the dehumidifier shall not be blocked by obstructions, and the air filter shall be cleaned.

4.When the ambient temperature is lower than 15, the water droplets attached to the surface of the evaporator will freeze and weaken the effect of the dehumidifier, if the surrounding temperature exceeds 40, the pressure in the system will increase and overload the compressor, at this time the overload protector should cut off the line, otherwise the compressor motor will be damaged. Therefore, the optimal temperature range for the use of the dehumidifier is 15 40 .

5.If the humidity in the air is below 30%, it is too dry and uncomfortable, so the reliable humidity controller controls it to maintain the range of 50% to 60%. When in use, the doors and windows should be closed as much as possible to achieve the dehumidification effect of the room.

The body should be placed flat, not inclined or horizontally to avoid machine failure or abnormal noise. 6.If the water storage in the dehumidifier is too full, and the water in the storage tank must be transported during operation to avoid overflowing the wet surface, please unplug the power cord and then pour out the water in the water storage tank.

7.It is best to swing the dehumidifier for four to six hours in advance after moving, and then turn it on, because the compressor line in the dehumidifier contains cold coal, and after moving, the cold coal must return to its original position after four to six hours. 8.

Clean the air filter regularly (about once every 2 weeks) to maintain the dehumidification and dust removal efficiency and life of the machine. Clean the air filter and wash it with water below 40 meters; It is better to wash with detergent, after washing off the dust, rinse it with water, dry it in the shade and put it back into the body. When cleaning the body, gently wipe it with a damp cloth; Avoid splashing water directly to clean up so as not to damage the insulation of the appliance.

If there is adhesive on the surface of the body, it can be cleaned with soapy water, and avoid spraying it with gasoline, petroleum essence, solvent or spray insecticide to avoid paint peeling or discoloration. Do not use thin rods or wires to dig inside the machine to avoid malfunction or danger. 9.

When the power is out or not used for a long time, or when you are traveling, please unplug the power cord to maintain the life of the machine.

A good dehumidifier is recommended to choose Parkoo dehumidifier, which has a large dehumidification capacity, is safe and reliable, and is worth choosing.

1. Long service life.

The design and utility model patented technology of Baiao dehumidifier are adopted, and the high-performance core components are selected, coupled with exquisite manufacturing technology and strict performance testing, which can ensure the stable and reliable operation of the equipment in harsh environments, and the service life is longer.

2. Low carbon and energy saving.

Under the same dehumidification capacity, the energy consumption is about 20% lower.

3. High-tech products.

Baiao dehumidifier has won the "high-tech product" certification, and its technical strength has advantages in the industry.

4. Super cost-effective.

Baiao's advanced ERP management system efficiently integrates the best chain resources and realizes large-scale production, providing customers with dehumidification products with "leading technology, exquisite workmanship, excellent quality and reasonable".

How to maintain the industrial dehumidifier is as follows:

1. The condenser should be cleaned from time to time and kept clean.

2. The dehumidifier should be placed in the indoor position.

3. The air outlet of the dehumidifier shall not be blocked by obstructions, and the air filter shall be cleaned.

4. When the ambient temperature is lower than 15, the water droplets attached to the surface of the evaporator will freeze and weaken the effect of the dehumidifier, if the surrounding temperature exceeds 40, the pressure in the system will increase and overload the compressor, at this time, the overload protector should cut off the line, otherwise the compressor motor will be damaged. Therefore, the best operating temperature range of dehumidifier zui is 15 40 .

If you want to know more about industrial dehumidifiers, we recommend consulting Parkoo. Parkoo products have passed the domestic CCC, the United States ETL, South Korea KC certification, the European Union CE GS certification, and the Japanese PSE certification. With more than 10 years of experience, Baiao has accumulated a large number of technical backbones and rich industry experience.

From the nuclear power field, which has high technical requirements, to various energy and production fields, and even general warehousing applications, Baiao can provide them with perfect industry temperature and humidity solutions. [Click to match your exclusive temperature and humidity solutions and products].

Check it up regularly.

After long-term use, the circuits and components in the dehumidifier will have different degrees of aging. Serious will also cause harm to the unit and the human body, so please ask professionals to regularly check the circuit of the dehumidifier, replenish the refrigerant, replace the aging components, the replacement of the aging components can effectively prevent radiation to the human body, and give you a healthy environment.

The dehumidifier must clean the filter element frequently during normal times. Unplug him when he doesn't need the power supply. Keep it dry on a regular basis.

How to maintain the industrial dehumidifier, under normal circumstances, it takes about 20 days to a month to remove the filter and clean it.

There are many ways to maintain the dehumidifier, and you must wipe it often, and you can often wipe it with that kind of oil.

The maintenance of industrial dehumidifiers has its own procedures, and it is usually paid attention to wiping clean with lubricating oil.

Try to use purified water, and then there is also the case of trying not to let the machine get wet.

Industrial dehumidifiers must be maintained a lot of time and maintained with oil.

Industrial dehumidifiers usually need to add more oil, which can make it run more smoothly. In addition, it is best to conduct a safety check once a month, and once you find that some parts have problems, you can replace them in time.

As long as the inspection can be strengthened, the regular replacement of the parts inside can make his operation more perfect.

Sometimes it rains one after another, and the house is damp, especially in some areas in the south, the humidity is very heavy, and many families will choose to buy a dehumidifier. Next, PCHOUSE will introduce you to how to maintain the dehumidifier.

1. Clean regularly.

Regularly removing the filter of the dehumidifier for cleaning can effectively improve the dust removal effect of the dehumidifier and improve the ambient air. It is recommended that you clean the heat sink of the outdoor unit every half month, which can fully improve the heat exchange coefficient and heat exchange efficiency of the dehumidifier, so as to increase the working efficiency of the dehumidifier.

2. Regular inspection.

Whenever the dehumidifier is used for a period of time, the control elements inside the dehumidifier will be partially aged, and even cause some harm to the human body. Therefore, it is necessary to regularly ask professionals to check the dehumidifier, replace the aging components, and replenish the refrigerant, which can prevent the aging of the components from harming the machine and the human body, and can keep the dehumidifier in good working condition.

3. Adjust the humidity.

When adjusting the humidity of the dehumidifier, the user should set the humidity according to the actual situation such as how he feels about the humidity, the number of people in the space, and the size. Usually in a state of less activity such as rest and sleep, the relative humidity of the room is about 60%rh, and the human body will feel more comfortable. The humidity of the dehumidifier must be properly regulated, because if it is set too low, it will not only make people feel dry, but also shorten the life of the dehumidifier.

Therefore, if the dehumidifier is not used for a long time, protective measures should be taken. When the dehumidifier is not used for a long time in winter or when going out, the dehumidifier should be covered with a protective cover to avoid the dehumidifier from being exposed to the sun and rain, the deposition of gray oak dust, and the difficulty of cleaning and maintenance in the future caused by the bridge.

Industrial dehumidifier is a common tool in life, people must pay attention to its use when using the dehumidifier, but also pay attention to its cleaning skills. How to clean the industrial dehumidifier? Next, let pchouse answer for you.

The body of the dehumidifier needs to be wiped with a damp cloth frequently, but the Zhendan dehumidifier cannot be put down. For the stains on it, it can be cleaned with a neutral detergent product.

The filter screen of the dehumidifier needs to be cleaned once every half a month, and when cleaning, you only need to pick up the handle and pull it forward, and the removed filter screen can be used to absorb dirt with a vacuum cleaner. For dirty filters, you also need to use cleaning products to soak, and then use a soft brush to scrub, pay attention to the action to be gentle, do not damage the filter. After cleaning, dry it in the sun or with a hair dryer and reinstall it.

However, if the filter is damaged, it needs to be replaced.

If the dehumidifier is not used for a long time, be sure to let the residual moisture inside clean, which can reduce the growth of mold, and you can choose to stop the antibacterial operation and set a timer to shut down for about 4 hours before stopping. If you are sure that you do not use it, pack it in a plastic bag and put it in a ventilated and stable place.

It can be seen that the dehumidifier needs to pay attention to relevant matters when using it, such as cleaning problems, the body of the dehumidifier needs to be wiped with a relatively moist cloth frequently, but the dehumidifier cannot be put down. For the stains on it, it can be cleaned with a neutral detergent product.

Moisture and mold can cause damage to human health and products. In this case, it is necessary to use a dehumidifier to inhibit the growth of mold and prevent moisture from causing damage to human health and products. So, we're going to use a dehumidifier!

1. After the dehumidifier is used for a period of time, the air inlet filter will accumulate dust, and the dust will accumulate too dense and thick, which will affect the dehumidification effect. Therefore, it is necessary to clean the filter frequently to make the front and rear ventilation smooth.

2. The humidity sensor is generally placed on the ventilation surface, if the use environment is not good, the humidity sensor is blocked by dust, and the sensor cannot display and control the humidity. After a period of use, the user clears the sensor with a soft brush. dust and keep the sensor fresh.

3. When the dehumidifier is not used for a long time, unplug the power plug to clean the whole machine, volatile oil, thinner, and detergent may cause harm to the machine, please do not use it. Drain the water tank of stagnant water to avoid the growth of bacteria.

4. When the dehumidifier is used for a long time, stop it at least once a week and do some general maintenance to see if the machine filter needs to be cleaned and whether the machine has any abnormal sound.

5. The dehumidifier controlled by digital microcomputer should not be disassembled by non-professionals due to the precision of its control of the original components. Operators should also not change functions frequently, which will reduce the service life.

6. Refrigerated dehumidifiers are dehumidified by the principle of compressor refrigeration, because the compressor is a high-tech component and the heart of the entire dehumidifier, the compressor has certain requirements for the quality of the power grid, and the compressor is often used in an environment with unstable voltage, which will lead to short circuit of the compressor coil and other failures. Therefore, when the voltage fluctuates greatly, the use of the dehumidifier should be stopped and the voltage regulator should be used instead. Dehumidifiers with microcomputer-controlled voltage protection function are not subject to the above conditions.

7. When installing the dehumidifier, the user should pay attention to matching the power cord that matches the wire diameter. If the power cord is too thin, the current when the machine starts is too large, which can easily cause an instantaneous voltage drop, resulting in a short circuit of the compressor and other related electrical components.

8. For dehumidifiers with compound compressors, when it is necessary to move and place, the tilt of the body should not exceed 45°. It is absolutely forbidden to put it upside down or horizontally, which is easy to cause the decoupling of the internal shock absorbing spring of the compressor, so that the compressor can not be used normally when it is used.