The tile seam is not done, how to rework

First, in the process of sewing construction found that there is not a good seam, with a sewing knife to deduct the undone sewing agent, re-gluing, and then press the seam, in the construction process of the sewing agent has not been cured, the sewing agent is still soft, with a sewing knife to deduct the sewing agent is also easy, if you wait for the sewing agent to be deducted in the curing process, it is more time-consuming.

Second, if it is a solidified sewing agent, then you can only prepare professional rework tools, a 1600-watt heat gun, and a shovel. Use a heat gun to blow the sewing agent that needs to be reworked, blow the sewing agent with a hot air gun in one hand in the front, blow the sewing agent softly, hold a shovel in the other hand in the back, follow the heat gun and push the sewing agent forward, and the sewing agent after blowing soft is gently pushed out of the tile gap with a shovel.

3. Remember to clean up the gaps, especially the reworked tile gaps, to clean them cleanly, and there can be no residue of the joint agent in the gaps, including the edge of the tile gaps, otherwise particles will appear when pressing the joints, resulting in an uneven and smooth surface of the joint. Don't look at the technical content of beauty sewing is not high, but doing beauty sewing is a meticulous work, you need to have enough patience, confidence and carefulness, focus in order to do a good job in beauty sewing, focus to be professional. Fourth, when cleaning the sewing agent, be sure to wait for the sewing agent to blow soft before shoveling, do not use a vigorous shovel, and do not blow the heat gun against a place for a long time The tile gap will become brittle because the heat gun bakes for a long time, otherwise vigorously use the shovel to clean the sewing agent, the tile gap is easy to collapse porcelain, if it is for the customer's home to rework, the tile is damaged, not only can not pay the wages, but to compensate the owner for the loss, the novice is easy to make such a fatal mistake, so that the gain outweighs the loss.

Then you need to clear it out first, and do it before.

<> pro

I am glad to answer for you: the specific way is as follows: 1. First use a utility knife or shovel along the gap of the tile to cut the original beauty seam.

If the original seam construction is not qualified, after cutting, the whole seam can be easily pulled out. If the craftsmanship is better, it cannot be pulled out directly. 2. Turn on the hot air with a hot air gun or hair dryer, blow on the seam, at this time, the residual seam will become soft when it encounters high temperature, and immediately use a utility knife to remove the residual seam.

When blowing hot air, pay attention to control the temperature, as long as the beauty joint agent is soft, otherwise the temperature is too high to easily cause the tile to crack, but the gain outweighs the loss. 3. Use a vacuum cleaner to remove the dust and impurities in the crevices, so as not to affect the effect of the secondary sewing. It is recommended to choose a high-power vacuum cleaner to remove debris and dust, and then use a sponge or rag to wipe off the dust on the surface of the tile.

4. After the seam is cleaned, you can re-apply the sewing agent, and the method of the second operation is exactly the same as the first sewing. Note that the material of the sewing agent should still choose a two-component, and the effect is better. And in the process of beautifying the joint, it is necessary to clean up the dust and residual sewing agent in the tile gap in advance to ensure that it is correct before construction.

With the help of a special sewing shovel or utility knife, the blade is hard enough, because the sewing is still relatively hard after it is done, and the adhesion to the tile is very high. Use a spatula to slowly cut off the original sewing material little by little.

This method is very laborious, testing the patience and carefulness of the builder, pay attention to avoid the destruction of the tiles! Of course, the seams are not so easy to clean, and many areas are difficult to remove with a shovel.

What should I do if the tiles are not dry and the seams are made.

With the help of a special sewing shovel or utility knife, the blade is hard enough, because the sewing is still relatively hard after it is done, and the adhesion to the tile is very high. Use a spatula to slowly cut off the original sewing material little by little. This method is very laborious, testing the patience and carefulness of the builder, pay attention to avoid the destruction of the tiles!

Of course, the seams are not so easy to clean, and many areas are difficult to remove with a shovel.

Hope it helps, dear

Hello dear! Glad for your question! How to deal with the gaps in the tiles without doing beautiful seams:

Nowadays, the tiles will be seamed, not only more beautiful but also anti-fouling and moisture-proof, so if you don't do the seams, what are the treatments: 1. You can use white cement or black cement to hook the joints in the tiles. The connection is better when using white cement and black cement to hook the joints, and it is particularly convenient to clean.

But their shortcomings are all too obvious. It will fall off over time. In particular, the grease stain in the kitchen will turn yellow.

Greasy ones are hard to clean. 2. You can use caulk to repair the joint. The caulk has a certain degree of adhesion to the Tongxiao, has the characteristics of compression, wear, and cracking, and is simple to operate, and it is also very cheap.

The disadvantage is that it is not waterproof and easy to powder, and after a long period of use, it will become dirty, black, and breed mold, which is not beautiful enough. Caulk does not have the slightest water-blocking effect, which is why the bathroom is obviously waterproof, and the walls on both sides of the bathroom will still be alkaline. As an alternative to traditional caulk, it has the characteristics of easy scrubbing, dirt resistance, no shedding, and beautiful appearance.

It is used by many owners as the first choice for caulking, so what are the advantages of the sewing agent: 1. The sewing agent is made of polymer and high-grade pigments, which has ultra-high performance and super decorative effect compared with the traditional caulk. And it is more green and environmentally friendly, and does not contain toxic substances that are harmful to the human body.

2. The beauty joint agent can avoid the black and mildew of the tile joints and prevent the growth of bacteria. This is because the sewing agent has strong adhesion, waterproof and mildew resistance, corrosion resistance, and is very loose and suitable for use in the relatively humid environment of the kitchen and bathroom. Moreover, the surface of the beauty joint agent is very easy to take care of after solidification, and it can be scrubbed with water together with the tile, and the surface is wear-resistant and not easy to become dirty.

3. The color of the sewing agent is very rich, there are many selectives, and the color is bright and shiny, more beautiful and high-end, and it will not fade after long-term use, bringing a better overall effect to the wall. Moreover, the surface layer has high strength, good texture toughness, high adhesion density with ceramic tiles, and is more harmonious and integral. 4. The construction of the beauty joint agent is also relatively simple, and the current new beauty joint agent does not need to use the gap of the tile filler as the bottom layer, and can be directly used to fill the gap of more than 2mm tiles.

The beauty joint agent can effectively prevent the deformation and damage of the ceramic tile from thermal expansion and cold contraction, and the adhesion of the beauty joint agent is strong and sticky, which can prevent the tile from falling off to protect the tile and prolong the use time of the tile.

Summary. The rework of the seam will not affect the tiles, and the seamstress master must be very careful not to damage the tiles when cleaning the gaps.

The rework of the seam will not affect the tiles, and the seamstress master must be very careful not to damage the tiles when cleaning the gaps.

In the process of tile seaming, if it is broken, it can be redone, and it is necessary to remove all the original seam of Kongsong, and the tile does not need to be disassembled. If you want the bucket to burn Zheng Zheng to remove the beautiful seams that have been done, you need to use a small spatula knife, which can cut off the beautiful seams and then remove them.

In addition, a hot air blower is also needed, because once the solidification mark is destroyed, the virtual reserve will become very hard, and it will be easier to soften it through the hot air blower and eradicate it again.

In the past, caulk or white cement were used to repair joints. But their shortcomings are all too obvious. After a long time, it will turn black and fall off. In particular, the grease stain in the kitchen will turn yellow. Greasy ones are hard to clean.

As a substitute for the caulk, the beauty sewing agent has the characteristics of easy scrubbing, dirt resistance, no falling off, and beautiful appearance. It is the first choice for filling gaps by Honda owners, and the beauty joints in the bathroom also have a great effect on preventing water from seeping through the gaps in the tiles.

There is no tile gap to do beautiful seams, just look at the caulk is not the slightest water blocking effect, which is why, the bathroom, obviously waterproof, the wall on both sides of the bathroom will still be anti-alkali, not waterproof is not done, but sometimes the toilet water consumption is large and penetrates into the sand and dust, because there is sand and dust to block the water can not be emptied in time, it will penetrate from the cement sand dust to the wall outside the bathroom to cause anti-alkali, you bathroom to do beautiful seams, you can effectively prevent this situation.

A house is generally lived in for 10 to 20 years, do you want your tile gaps to be as bright as new, or let it go?

If the tile is not seambled, you can use black cement to hook the tile, and the effect is very good. Although this practice has been practiced for a long time, many people have forgotten about it because of the appearance of beauty sewing agents.

However, the cost of tile seams is too high, and black cement is still used, saving money at the same time, and the effect of decoration is also good-looking. Mul.

Black cement has been tempered over time and has now become more practical. If you use black cement to hook the joints, the adhesion is very good, and you are not afraid of mold or dirty, and it is much easier to clean.

Whether it's a kitchen, bathroom or balcony, you can use it to hook the seams.

You can use black cement to grout the joints in the tiles, which is a good effect. In the past, there would be this practice, but after the appearance of the beauty sewing agent, this practice will not be used very much, but the cost of tile sewing is relatively high.

The black cement will be very practical after a period of time, and the connection when using black cement to hook the joints is better, there will be no mold and too dirty, and it is particularly convenient to clean. Whether it is in the bathroom or the kitchen, it can be used to hook the seam.

1.Avoid blackening and mildew in the crevices.

Traditional gap fillers are caulks, which are easy to breed bacteria in a humid environment, and even if they are cleaned, they are easy to recur. If you use a sewing agent, it can be effectively solved, because the sewing agent has the characteristics of waterproof and mildew-proof, strong adhesion, good sealing, can keep the gap dry, and prevent the gap from mold.

2.Fill in the gaps and have a beautifying effect.

White caulk is used for a long time, it is easy to yellow and discolor, and there is manual error when paving tiles. The choice of a colorful sewing agent makes the gap look very unsightly. The color of the beauty joint is very rich, and it will not fade after long-term use, and it can also fill the unevenness in the gaps in the tiles.

At the same time, if you want to make beautiful joints, you must reserve the width of the gap, which can also make the tiles more neat and highlight the overall beauty of the tiles.

3.Easy to clean and keep tidy.

The surface of the sewing agent is smooth as porcelain, wear-resistant and non-sticky stains, it is very convenient to clean, as long as it can be wiped clean with a wet rag, and it can be cleaned together with the tile. The sewing agent is not easy to get dirty, and the high-quality sewing agent is environmentally friendly and healthy, which can ensure the cleanliness and tidiness of the gaps.

4.Protect the tiles and extend the service life of the tiles.

The tile itself will have the phenomenon of thermal expansion and cold contraction, and the hard caulk will directly affect this change of the tile, resulting in the arching and cracking of the tile. Although the beauty joint agent is very hard, it will have some toughness, which will not affect the thermal expansion and contraction of the tile. At the same time, the adhesion of the beauty joint agent is very strong, which can firmly adhere to the tile, prevent the tile from falling off and arching, and prolong the service life of the tile.

The gaps of tile paving are generally beautifully seamed, if the color difference is too abrupt, you can choose a similar color to the tile. It is also possible to use caulk for caulk, and now there is also beauty sewing paper, but beauty sewing paper is a real IQ tax product ......

There is no seam treatment, only a metal strip or glass product is used as a filling between the two tiles when laying tiles.

Hello, there are two reasons for the problem of beauty seams, one is that the inside of the seam is not clean, there are water stains or dust, and the other is that the colloid is not full and collapses. In either case, there is a corresponding solution, but you must first pick out the problematic sewing agent in the gap. If the sewing agent has not yet cured, you can directly use a sewing knife to pick out the sewing agent; If the sewing agent has been cured, you should first blow the sewing agent soft with a heat gun, and then use a sewing knife to clear it.

The cleaned gaps only need to be re-applied with gel and repaired.