How to adjust the speed of the garment factory computer grip car

Big brother, I have to ask your ** master, how do we know.

The specific adjustment method is as follows:

1. First turn off the device.

2. After shutting down, press the P+S buttons, and then turn on the machine when you don't let go.

3. When the motor is started, release the two buttons.

4. Then press the P button + - to select P68

5. Press the S button again to display the data and high speed, return to the P57 menu, and then modify the speed, do not exceed 4800

6. Finally, return to the P1 menu, after the setting is completed, return to the boot interface 3333, shut down and save.

1. Turn off the device 2, press P+S and then turn on 3, wait for the screen to appear, and then release 4, press P to set the speed 5, set it, and restart the device.

<> look at the picture.

What is the sidecar password. Locked.

The specific steps are as follows:

Press P first, display P-number, press plus and minus to P-01, then press S, then the number that appears is the speed, press plus and minus to adjust to the speed you need, then press S to confirm, then press P, and end.

Press and hold the P button, and P1-2000 can be adjusted when it comes out.

The control panel of the computer sewing machine mainly adjusts the size and speed of the needle code, the specific operation depends on what brand of machine you have, the computer sewing machine adjusts on the display screen There is a circle of speed Press it and then press the - sign, as if it is adjusted in this way.

Sewing machine First of all, we check whether the needle is installed correctly, it is best to change to a new needle, if it still does not work, we then open the needle board, turn the needle to the lowest position, and see that the tip of the hook is about 8mm away from the needle. If so, then lift the needle left and right, and then see if the hook tip coincides with the center of the needle. At this time, the needle and the hook tip should not be too tight, and there should be a gap.

Sometimes the needle is a little bent and will skip the needle, the easiest way is to change the needle to try, if it doesn't work, when the needle is installed, try a little bit down, only a little bit Oh, otherwise the thread will break, sometimes such a simple operation is also very effective, with the needle and the thickness of the things you sew also have a relationship. If the needle is thicker, it will skip if the needle is thin, and if it is thin, the needle will also jump if it is thick.

According to the master of the first big question to operate and see, if it doesn't work, you can't find the manufacturer of this product directly, customer service to them to call **, should be able to solve the problem very efficiently, only the manufacturer knows, his product, but also better understand his product.

accounted for the number of patent applications filed by WIPO last year. "Historically, it's really unmatched," he said

The braking force should be well controlled, and the manual transmission car should also pay attention to the control of the half-clutch state when the speed is very low.

The most common mistake that beginners make is to press the brakes to the end when the speed is slow to a certain extent, so that the car finally stops suddenly. In fact, on the contrary, the slower the speed, the less sexual force, so the brakes should be lighter, so as to ensure that the car stops at a uniform deceleration. If it is a horizontal road, when the speed of the manual transmission is close to stopping, you can completely step on the clutch, take off the gear, completely release the brake, and let the car stop naturally only by friction and then pull the hand brake.

If it's downhill, you need to apply a little brake and a little resistance. The automatic transmission also needs to apply the brakes a little bit, otherwise the car will re-accelerate.

With more practice, you will be able to control the car slowly, and the speed of the control car can be slowed down to no more than 1 cm per minute. There is no slowest except for the stop (the speed is 0).

After driving for a long time, you can judge how far you can go by inertia according to the speed of the vehicle, so as to naturally control the braking force at different speeds, and release the brakes at the appropriate time to let the car stop smoothly in the required position.

Driving a car is not good with theory alone, it must be practiced, just like using chopsticks, theory alone is useless. Although everyone knows how to use chopsticks, it is still not good to use the hand that is not used often. Because that hand didn't practice.

When the laptop's system is running very stuck, you can rule it out as follows:

First, the software aspect.

1.It is recommended to reduce the number of startup items and avoid running multiple programs at the same time.

2.It is recommended to use an external power supply as much as possible and set the power supply option to high performance, so that the CPU can reach full range operation.

3.It is recommended to turn off the Windows Update function of the operating system, as frequent updates will have a slow impact on the system.

4.It is recommended that you can use some optimization software to try to optimize the system.

5.If the above operations do not work, we recommend that you reinstall the operating system and observe it.

Second, the hardware aspect.

1.It is recommended that you try upgrading the memory to speed up your machine.

2.If none of the above methods work, then it may be a hardware failure of the notebook, and you need to take the machine to the service center for testing and judgment.

Scholar Mr. Liu Chuanfu pointed out in the monograph "Cao Fu, Jia Baoyu in the Dream of Red Mansions": "A hundred years of red studies ignored the signatures of more than 200 Yan Zhai, especially when Yan Zhai, who often 'cried loudly', signed his name in 1754, Cao Xueqin was still alive, and lived for ten years. It is our common sense that whoever signs the author is the author.

In recent years, the call for the denial of 'author Cao Xueqin' has become more and more intense. But who is Fat Yan Zhai is also a mystery, and the only historical material is also recorded by Yurui, "his uncle Fat Yan Zhai", saying that he is Cao Xueqin's uncle. [13]

1. Please check the manual of the equipment directly and adjust it according to the instructions in the manual.

2. Consult the dealer or official customer service, and adjust it according to the other party's explanation.

Questions. Silver Arrow pulls the car Qixing computer.

Here's how:1Look at the a(n)b button on the left, which represents the incoming needle.

2.Then the display will show the numbers, such as 1-2-3-4-5 and so on, the higher the number, the more needles will be poured. and d(n) are the outlet inverted needles.

Its digital control is the same. 4.As for the automatic thread trimming, there is a screw for tightening the needle and thread, and the computer car has a large one and a small one.

5.Which is smaller is the one that controls the length of the trimming thread. The tighter it is tightened, the shorter it is.

6.If it can't be solved by screws, it is necessary to let the factory's machine repair debug.