How to kneel and beg for an iron earphone to burn the machine? How to cook the moving iron headphone

Burn-in: 1Keep in mind that the method of cooking headphones is "gradual", at first use a softer**, let the headphones soothe for 10-30 hours at a lower volume, and then use the ordinary** (except rock and dance music) to cook for 100-200 hours at medium volume; If you listen to the treble at this time, it is not harsh, it becomes mellow and natural, the midrange is warm and friendly, and the low frequency is no longer a rumbling in a mixed group, but full of details, then congratulations, OK, you must not rush to quick success.

2.One is that you can't work continuously for too long! Because there is resistance in the voice coil, it will heat up after working for a long time, and it will burn the voice coil if you don't do it!

It's best to stop for a few minutes every two hours and then continue. Second, the volume must not be too large, the earbud diaphragm is a very fragile material, if the volume is large, the stroke of the voice coil movement will be large, so as to pull the diaphragm violently, which will cause the voice coil to loosen, the diaphragm to deform or even tear and so on.

3.Open the full frequency, the purpose is to open up the earphones, the method is to use a variety of different frequencies to continue **, generally continuous boil for one to two hours and then take a break, but the volume is not too large, about ten hours after there will be obvious effects.

4.What you need to do is to make a sense of boiling ** (especially high-quality headphones will be of great help),Most of them use some high-quality audio vast pure** sounds,Personal favorites,Sad city、Happy hotel, etc.,The use method is the same as above。

5.Choose your favorite song to make the 3300 even more effective in this genre. In fact, after the earphones are used for a long time without boiling, the sound quality will also be improved to a certain extent.

6.It is recommended to listen naturally, do not deliberately go to the pot, you can also use a safer method, turn the phone to the radio, find a channel-free position, you can hear the sound of the current in this position with a volume of 20% for 10-12 hours.

You can also go online to get a trial disc, don't listen to rock and roll at first, and listen to something soothing**.

The headphones don't need to be cooked, and deliberately cooking them is easy to cause problems. It's just a run-in process, the result is the same, it can't be because the pot changes a lot, as long as the run-in is over, everyone is the same. If it really has a big impact, the manufacturer must have finished cooking before leaving the factory.

Just listen to it naturally, *** put all types of songs on it, the volume should not be too big, just put it for a while. I've been playing for so many years, and I only deliberately go to the pot, and the pot is broken, and I haven't seen the natural pot bad. Now I use UM3X, a three-unit moving iron.

Every earphone is so open, don't worry, the myth of burn-in is non-existent. Don't put too much sound, don't put too much bass, before boiling.

The moving iron earphones basically do not need to be burned, the volume is too large to damage the earphones, and it is also not good for hearing, please take it in moderation.

You can use the dynamic method to cook, but there is one point, Apple's moving iron headphones are not much necessary to cook.

Not only Apple, basically there is no need to cook the headphones below 1,000 yuan, one is that the time needs to be long, and the other is that the effect is not obvious, if you are a headphone enthusiast, you will not buy MA580.

About how to cook MA580, the simplest and most effective way is to use it to listen slowly**, anything**, but the sound can not be turned on too much, and it will be naturally boiled in the early months after listening.

After the machine, it can improve the ductility of the diaphragm, and the potential of electrical performance can also be exerted. The structure of the headphones is simpler than that of the speaker, and the diaphragm is much thinner than the speaker, and the diaphragm is generally fixed with glue, and it is very likely to melt the glue under high-power operation, resulting in the serious consequences of the diaphragm edging, and the biological diaphragm is especially prone to such problems, so we recommend that you can listen to it for a week at the medium volume of normal use. In addition, a few methods are proposed for your reference:

1.Radio no signal...The "hissing" sound (similar to pink noise) emitted allows the earphones to work for a long time to achieve the effect of burning2

Use the software on the computer to burn the machine; It's a software burner that can make pink noise3The use of a class of sound CD signal disc to carry out, this sound CD records pink noise, also known as pink noise The diaphragm of the moving iron is made of metal, which is harder, and the open sound treble is easy to sharpen, and there will be improvement after praise, but the overall change is not as large as the moving coil, because of the factors of diaphragm material and structure

Operation method: 1. Choose a natural listening method when cooking headphones.

2. Adjust the high volume of the ** volt you usually listen to one-third to one-half of the normal use, do not use a symphony with a strong bass or large length, and change it to ordinary pop**.

3. After listening for a period of time, the volume of the headphones needs to be slowly increased, and under normal circumstances, it is enough to listen for about 200 hours.

Earphone cooking: It is an operation carried out for the run-in of mechanical infiltration hall dust parts, the purpose is to make the edge of the diaphragm move and avoid sound tightness.

Plex Zen Motion Iron Headphones: Earphones that are transmitted to the center point of a miniature diaphragm through a delicately constructed connecting rod to produce vibrations and sounds.

Moving like an iron earbud requires a pot process to enter a stable state.

The "pot" has nothing to do with the moving coil moving iron, its significance lies in the mechanical run-in of the earphones to achieve a relatively mature and stable state.

A moving iron headphone is a headphone that is transmitted to the center point of a miniature diaphragm through a delicately constructed connecting rod to produce vibrations and sounds. Moving iron headphones can be easily placed in the ear canal due to the much smaller size of the unit.

This effectively reduces the area of the ear part and allows it to be placed deeper into the ear canal.

In the initial stage, you can use the radio to turn on the machine, you need to tune the radio to a blank channel with no signal, and the volume is controlled below 20%; At this time, the sound of Zizi is equivalent to the white noise disc we usually use when burning, and it takes about 6 to 8 hours a day to buy new headphones, and it needs to last for a week to two weeks, although this method is relatively slow, but it is the safest way to burn the machine, so that it will not damage the headphone parts, at least not because of the operation problem to burn the headphones, thereby affecting the service life of the headphones.

Burn the machine** lossless is the best, no, it also needs 320k*** bass; Yan Huang's first drum.

Mid-range ferry port California Hotel Paradise.

HF Vivar Season 4 Moon Goddess.

I use these tunes for several headphones.

Increase the sound of 1 4 each time for about 10 hours in each volume segment (you can slowly increase the volume to extend the burn-in time when you feel that the sound is loud).

As for whether to burn the machine 1k down, many people say don't burn the machine, in fact, I don't agree with it, the burner is also a kind of fun, see if you can hear the change of the headphones.

Just listen to it naturally, there are only some quantitative changes in the burn-in, and there will be no qualitative changes.