How to deal with the sound of the earphones has been adjusted to the smallest level or the loudest?

1. Open Settings - General - Accessibility - Mono Audio in turn, do you see the left and right adjustment sliders? Move the button in the middle to the far left or right.

2. Still in this auxiliary function, find "** noise elimination" and turn it off.

3. There is also a hearing aid in the auxiliary function, turn on the "hearing aid mode", and then press the volume button to turn up the volume when you hit **. This one was originally intended for people with behind the ears.

If the above methods don't work, it may really be something wrong with your phone or headphones. You can try to change the headphones first, but if it still doesn't work, then you can only send it to Apple for after-sales maintenance.

If the sound of the headphones has been turned down to low and still feels loud, then you can adjust the sound of your device and turn the sound of the device to a little lower, and that's it.

In the case of headphones, if the sound has been turned to a minimum, you can turn down the sound of your mobile phone or computer a little bit, and then the sound will not be so loud.

Just searched and learned,Test it works,Go in to set up,Accessibility,Accessibility,Audio,Mono on,Tune to the left channel or right channel,The volume is small。

If you're using an iPhone, try setting the volume with Siri, and if you say "2% volume", it will automatically set it quieter than using the volume buttons. However, it is good to note that the new iPhone system is currently supported in the control panel.

The specific adjustment steps are as follows:

1. Unlock the phone, swipe up from the bottom frame to pop up the settings menu, 2. Repress or (long press) the volume rectangle bar to pop up the large rectangular bar, 3. When the volume is adjusted to the last bar with the button, then press and hold the rectangle bar to slide down to make more subtle adjustments to the volume.

If you are using an Android phone.

You can turn off the **volume synchronization in the interface of the Bluetooth settings,So that there are two levels of control of the volume of the system and the headset,After adjusting the volume of the system** to the minimum,Then press the volume button on the Bluetooth headset to adjust the volume,The volume will be very small。

All sounds are pulled to a minimum, so that the sound is noticeably smaller and has little to no impact on the quality of the song.

Here's how to fix it:

1. Right-click the small speaker icon in the lower right corner of the system tray and click "Recording Device";

2. Click the microphone icon and click the "Properties" button in the pop-up "Sound" window;

3. Click the "Level" tab in the pop-up "Microphone Properties" window;

4. Adjust the "Microphone Volume" and "Microphone Strengthening" sliders to the appropriate position;

5. Click the "OK" button to save.

First of all, confirm whether the Yuanxiang earphones are damaged, if there is no damage, it may be a problem with the settings, you can try it by following the following steps:

1. Enter the settings interface.

2. Enter the general interface of cavity elimination.

3. Enter the accessibility interface.

4. On the Accessibility page, slide the list.

5. Find the volume balance and take the bush key, and find that the sound is completely inclined to the left channel.

6. Adjust the channel channel to balance left and right, and the sound can be heard on both sides of the earphone.

Don't worry, it's not that the earphones are broken, there is a thin sheet in the earphones, which is normally convex, but because it is sometimes deformed with use, the sound becomes quieter. The steps to workaround are as follows:

1. First of all, put the low-sound earphone in your mouth and suck it (if you mind sucking it directly in your mouth, you can wrap the earphones in a napkin).

2. Then put it in your mouth and suck it.

3. Generally speaking, its sound quality will return to normal.

The bluetooth headset volume is too low, and the phone is already the loudest solution, as follows:

1. First turn on the Bluetooth headset and connect it with the mobile phone, as shown in the figure below.

2. Then press the button on the side of the phone to adjust the volume, as shown in the figure below.

3. There will also be a button for volume adjustment on the earphone, as shown in the figure below.

4. In the mobile phone, drag the interface down, and at the control panel, you can also adjust the volume of Bluetooth, as shown in the figure below.