Who knows what the characteristics of the die are

The stamping parts made of the stamping die are flat, no hair, and precise.

Stamping die is a special process equipment that processes materials (metal or non-metal) into parts (or semi-finished products) in cold stamping processing, which is called cold stamping die (commonly known as cold stamping die). Stamping is a pressure processing method that uses a die installed on the silver machine of pressure sail pants to apply pressure to the material at room temperature to make it separate or plastically deformed, so as to obtain the required parts.

1. Hemming. Hemming is a stamping process that rolls the edge of the process piece into a close closed circle. The axis of the curled circle is in a straight line.

2. Roll edge. The curling edge is a stamping process that rolls the upper edge of the hollow part into a close closed circle.

3. Stretching. Drawing banquet is a stamping process that turns straight wool or process parts into a curved surface, and the curved surface is mainly formed by the extension of the material located at the bottom of the punch.

The explanation of the word die is: corresponding to the punch"Accessories"The workpiece produces plastic deformation under the joint action of the stamping of the punch and the resistance of the die to complete the processing process, the punch die is an indispensable part of the stamping process, and the accuracy of the punch die determines the machining accuracy of the workpiece to a large extent.

The explanation of the word die is: corresponding to the punch"Accessories"The workpiece produces plastic deformation under the joint action of the stamping of the punch and the resistance of the die to complete the processing process, the punch die is an indispensable part of the stamping process, and the accuracy of the punch die determines the machining accuracy of the workpiece to a large extent. The pinyin is:

chōngmú。The structure is: punch (left and right structure) die (left and right structure).

What is the specific explanation of the die, we will introduce it to you through the following aspects:

1. Online explanation [click here to view the details of the plan].

Die: polyurethane rubber die, steel die, sheet die, low melting point alloy die, zinc alloy die and combined die and other structural forms.

Idioms about stamping dies.

The flesh and blood are blurred, the mountains and water monsters are strange, the people are blurry, the ends of the makeup are pretending to be pretending to be angry.

Words about stamping dies.

Pretending to be a model, even simulating a model, a mountain model, a water makeup, a model, an ambiguous appearance, a human model at both ends, a dog-like first mouse, and an ambiguous one.

Sentence formation about stamping dies.

1. According to Pascal's law, each die has an equal pressure value in the process of pressing the chain of the ring.

2. The application of this national standard parts library and component library can reduce the repetitive work of the majority of designers and improve the design efficiency and quality of the cold stamping die.

3, Zhang Xiong suddenly stopped, Bai Lao Wanxing imitated Zhang Xiong, but he didn't expect him to stop suddenly, and he stumbled into it.

4. The punch and die structure of multi-bend bending parts die are introduced.

5. The characteristics of the cold stamping die punch were analyzed by applying the group technology, and the part classification and coding system was designed by using the characteristics.

The closing height of the punch is the distance between the upper plane of the upper template and the lower plane of the lower template when the mold is in the lowest working position.

The concept of the Rush Mold:

In the trial production of new products and the production of stamped parts in small batches, a simple die structure has been widely adopted. This kind of die not only has a simple structure, but also has the characteristics of convenient manufacturing and low cost, and can meet certain processing quality requirements.

In the production of cold stamping, the research and development of these simple stamping dies has great practical value. This is because compared with conventional stamping dies, simple stamping dies have a fast production time and low manufacturing costs, which provides a more economical and effective way for the trial production of some new products and the production of stamping parts with small batch requirements.

Therefore, strengthening the research and development of simple stamping dies will effectively promote the upgrading and production development of industrial products, and have very important practical significance for further improving economic benefits and improving the existing industrial production technology level.

Summary. Stamping die products are usually manufactured on a die. A stamping die is made up of a punch and a die that forms the shape of a sheet metal by applying pressure between the two dies.

Punches are usually used to form shapes in a die. Therefore, stamping die products are manufactured on a die .

Stamping dies, whether the product is on the die or punch.

Stamping die products are usually manufactured on a die. The punching and pressing die is composed of a punch and a die, and the shape of the sheet metal is formed by applying pressure between the two dies. Punches are usually used to form shapes in a die.

Therefore, the stamp mold product is a ruler made on the die.

Can you tell us more about that?

A stamping die is one of a variety of molds that are used to form parts of a specific shape and size on materials such as sheet metal. It consists of two molds, the upper and lower dies, the concave die and the punch. The die is made up of a workbench and a die base, a die head, a template and a die base plate covered on it, while the punch is made up of a moving block, a top plate, a top, a top die judgment plate and a top die base, etc.

During the stamping die operation, pressure is applied from top to bottom, and the sheet metal is bent or sheared into the desired shape. In this case, the punch can be a tool used to support the sheet metal and form the desired shape of the die. The die is a tool used to slowly press the sheet metal into the desired shape.

Therefore, when manufacturing stamping die products, the die is usually the main manufacturing tool. Stamping dies are widely used in automobiles, electronics, home appliances and other industries, and can be used to produce automotive bodies, electronic equipment shells, panels and other products. Due to the advantages of high efficiency, low cost and flexible design, stamping dies have an important position in modern manufacturing.

The punch in the blanking die is the hole of the punching part, and the concave mold out the shape of the part. In the same set of molds, when blanking, the punch has to be punched into the die to drop the part, therefore, the punch is smaller than the die.