Where is the iPhone 6 light sensor set up?

In the display and brightness of the phone settings.

Specific steps to turn on iPhone 6 light sensor:

1. Find "Settings" on the desktop and open it.

2. Click "Display & Brightness".

3. Turn on "Auto Brightness Adjustment".

The light sensor is also called the brightness sensor, and the English name is light-senso.

It is generally located at the top of the screen of the handheld device, and can automatically adjust the brightness of the screen of the handheld device according to the brightness of the light currently in which the handheld device is located, so as to bring the best visual effect to the user.

In dark situations, the screen backlight will automatically dim.

The light sensor of iPhone6 is also called the brightness sensor, which is generally located above the mobile phone screen, and it can automatically adjust the screen brightness of the mobile phone according to the light brightness that the mobile phone is currently in, bringing the best visual effect to mobile phone users. Many tablets and mobile phones are equipped with sensors.

2. The light sensor is composed of a light projector and a light receiver, the light is focused by the lens in the light projector, the light is transmitted to the lens of the light receiver, and then the light is transmitted to the receiving sensor by the lens of the light receiver, and the receiving sensor converts the received light signal into an electrical signal.

How to reset the iPhone6 light sensor settings and steps:

First, enter a darker room, open the settings in your phone, and find "Brightness & Wallpaper" in the settings.

Then tap "Brightness & Wallpaper" to enter the settings, turn off "Adjust Brightness Automatically".

Move the "Brightness Slider" in the brightness setting of your phone to the place where you are most comfortable looking at the brightness of the screen, and then turn on the auto-brightness again when you are done.

Finally, turn on the lights in the room, and you will see that when the light gradually enters the light sensor, the brightness will automatically adjust the brightness, and the cursor will move in the direction of brightness, and the light sensor on the phone will be successfully reset.

<> light sensor is also called a brightness sensor, the English name is light sensor, many tablets.

and mobile phones are equipped with this sensor. It is generally located above the screen of the handheld device, and it can automatically adjust the brightness of the screen of the handheld device according to the brightness of the light currently in which the handheld device is located, so as to bring the best visual effect to the user.

It can be set in the Settings of your iPhone.

1. Open your iPhone and tap Settings.

2. Click "General" after entering.

3. Then click on "Auxiliary Leakage Cultivation Function".

4. Then click "Show Adjustment".

5. After entering, turn on the "Auto Brightness Adjustment" button.

The iPhone has a light sensor, if it is turned on, it can automatically adjust the brightness of the screen according to the surrounding situation, and if the surrounding environment is darker, it will automatically reduce the brightness of the screen to protect the eyes; If the surrounding light is strong, it will make the screen display two more, so that the screen content can be displayed, and it will not be too strong to see clearly, today here is how to make the iphone light sensor work, if you are interested, you can take a look.

Method steps.

Here take the iphone6 mobile phone as a screenshot of the operation, update the ios system to the latest version, unlock the phone, and open the settings.

Enter the mobile phone settings interface, find the general, click to enter, the old version of iOS can be directly set in the display and brightness.

Go to the general settings screen and click Accessibility.

Find Display adjustments in Accessibility, see if it's on, and tap to go to Settings.

In this interface, turn on the automatic brightness adjustment function, so that the iPhone light sensor can work.

You can try to cover the left light sensing hole on the top of the iphone6 mobile phone, you can see that the system will automatically reduce the brightness after masking, and the brightness of the screen will automatically adjust higher after letting go of the cover, and the light sensor will work.

Settings, display. There's an auto-sensitive one inside. UC Volunteer Service Team has you covered!

?The Wife (2008).Crystal Love (2002) ?The Accession of the Little Leatherman (2003).

1. Open the desktop of your phone and click the icon of settings.

2. Go to the options of the settings, and then click on the general options.

3. Then go to the general options and click on the Accessibility option.

4. Then enter the accessibility function, click on the column showing adjustment, and enter.

5. Then after entering, turn on the back switch of automatic brightness adjustment.

6. Then you can see the light sensor hole covering the top of the iphone6 mobile phone, and the system will automatically reduce the brightness, as shown in the figure The brightness of the mobile phone, if you let go of your hand, the light sensor will start to work.

When answering **, cover the part above the earpiece with your hand, and the screen will go black. The screen goes black when the phone covers the light sensor, which is the result of the phone's light sensor, or the combined action of the light sensor and the proximity sensor. The functions of its expression are:

1.When the ambient brightness changes, adjust the screen brightness to suit the function of the human eye.

2.Darken the screen when answering** to avoid glare from the screen and to prevent undesirable images that may occur when parts of the face are illuminated.

3.When the screen is covered, or when you put your phone in your pocket (bag), turn off the screen in time to save power.

The basis for making environmental judgments when implementing these functions is that the light in front of the screen is dimmed and objects are close together. And covering the light sensor with your hand actually fulfills both conditions, so the screen will go off.

It can be set in the Settings of your iPhone.

1. Turn on your iPhone and tap Settings.

2. Click "General" after entering.

3. Then click "Accessibility".

4. Then click "Show Adjustment".

5. After entering, turn on the "Auto Brightness Adjustment" button.

iPhone is a series of smartphones developed by Apple in the United States, equipped with the iOS operating system developed by Apple, and Jobs revealed the launch of the first generation of iPhone at Apple's annual meeting of global software developers at the 2007 annual meeting of Apple Worldwide Software Developers at the Mascoconi Convention Center in San Francisco.

The first-generation iPhone was released on January 9, 2007 by former Apple CEO Steve Jobs, and was officially released on June 29, 2007.

Tools Raw material: iphone6s

1. Turn on our phone, find Settings on our phone desktop and tap on it.

2. After entering, find Universal and click on it.

3. Once you're in, find Accessibility and tap on it.

4. Once you're in, find the amplifier and click on it.

5. Finally, click to turn on the automatic brightness adjustment switch.

Reset iPhone5 light sensor settings method and steps:

1. First enter a darker room, then open the settings of your iphone5 and find "Brightness & Wallpaper".

2. After that, click "Brightness & Wallpaper" to enter the settings, and then we will turn off "Auto-adjust brightness".

3. Next, we move the "brightness slider" in the iPhone brightness setting to a more suitable position for the environment, that is, when we are most comfortable looking at the brightness of the screen, after completion, we can turn on the automatic brightness again, as shown in the following figure:

4. Finally, we can turn on the lights in the room, and then you can see that when the light gradually enters the light sensor, the cursor will move to the direction of brightness, so far we have successfully reset the iphone5 light sensor.

PS: The biggest function of the iphone5 light sensor is to automatically adjust the brightness of the screen, in order to save power, and it has nothing to do with the quality of iphone5 photography.