What to do if the digital TV shows that the E12 area is incorrect

The incorrect E12 area displayed on digital TV is generally caused by the upgrade of the server connected to the set-top box, which leads to the failure to pass the authentication application of the set-top box smart card. Here's how to fix it:

1. Generally, the set-top box will automatically communicate with the server and refresh the authorization data of the smart card in order to pass the authentication.

2. If it still cannot return to normal after waiting for ten minutes, you should call the after-sales service of the set-top box, and the other party will refresh the authorization data of the smart card for the user, and it can be restored to normal after refreshing.

3. In addition, the failure of the set-top box or smart card may also lead to the prompt, and the specific fault needs to contact the after-sales service of the set-top box to arrange professionals to come to the door for comprehensive detection and repair of the fault.

I can only find customer service to solve it.

TV prompt (e1101--1) No signal is what's going on.

TV prompt (e1101--1) no signal what's going on, hello dear! 1、Check the network connection of the TV first,If the connection is not normal,There will be a prompt on the screen"Network is not connected"。 Check whether the IP parameters set by the TV are incorrect, and reset them to ensure that the network connection is normal; 2. When the above settings are invalid, connect to the broadband with a computer or mobile phone to test whether you can access the Internet.

It can be connected to the Internet normally, and the problem is compressed to the part of the network TV; 3. If you can't connect to broadband Internet access, check the broadband home equipment, such as cats, routers, and network cables, until mobile phones and computers can access the Internet normally. After the network problem is solved, the TV can be watched normally; 4. If the network is normal, the problem may be related to the bridge socks of the TV department. There will be a USB flash drive with **content,Or *** machine signal connected to the TV**,It can be normal**,There is no problem with the TV。

Check whether the network cable has poor contact with the crystal head, or the network cable port of the network TV is not in good contact, you can plug in and remove the crystal round head a few times, and shake the network cable to test it. You can also directly change a new network cable to try it; 5. If Minxiang is connected to the top box, the routine inspection is to observe the status of its indicator light, whether the remote control operation screen responds, and whether its working state is normal; 6. Through the above intuitive substitution method and elimination method detection ideas, the cause of the problem and the final failure equipment can be compressed. Hope it helps.

Summary. Hello, we are glad to answer for you, the authorization has expired, such as arrears, etc.

The show has been rearranged or the encrypted content has been updated.

The solution is as follows:

1.It can be solved by calling a cable operator.

2.It can be carried out through network authorization, and the general method is to turn on the computer first, search again, and then turn on the computer and leave it for a few hours. so that the authorization code loads. It's a good idea to check with your carrier before proceeding.

3. Check if the fee has expired, if you don't arrive, you can find ** to consult the TV station, and the TV station will deal with it.

4. It may be the illusion caused by the failure of the set-top box or smart card, you can ask a professional master to check it.

5. It may be caused by the chaos of the TV program, shut down and restart, and restore the factory settings.

Cable TV appeared E1101-4

Hello, we are glad to answer for you, the authorization expires and is delayed, such as arrears, etc. The show has been rearranged or the encrypted content has been updated. The solution is as follows:

1.It can be solved by calling a cable operator. 2.

The general method is to turn on the phone first, search it again, and then turn it on and leave it for a few hours. so that the authorization code loads. It's a good idea to check with your carrier before proceeding.

3. Check if the fee has expired, if you don't arrive, you can find ** to consult the TV station, and the TV station will deal with it. 4. It may be the illusion caused by the failure of the set-top box or smart card, and you can ask a professional master to check the crack. 5. It may be caused by the chaos of the TV program, shut down and restart, and restore the factory settings.

Hello, 1.If the cable between the TV set-top box and the TV is loose and the contact is not sharp, the signal will be lost. 2.

You can then check the cable, connect it correctly, and secure it again. 3.If it still doesn't work, you can plug and unplug the external cable again, and then observe and use it after powering off for half an hour.

4.If the service provider's external cable TV transmission line fails, or the server fails, the signal will be lost, and the service provider needs to repair it before returning to normal. 5.

Mistakenly switch the signal source of the TV to other modes,Resulting in no signal display,The solution can be to press the signal beam block source key of the TV,Switch the signal source mode one by one,Until the picture of cable TV is restored。 6.If the set-top box fails, take it to the after-sales repair point where the service provider is located for repair.

What is the cause of the E11 system error on the TV screen and what should I do?

Hello dear, it's a pleasure to serve you: the TV shows that E11 is not authorized by the program. You can unplug the smart card when the machine is turned off - insert the self-grinding SIM card into the SIM card slot inside the machine.

Menu-System Settings-OK-9999-OK-Factory Reset-Power Off-Power On-Insert a Smart Card that Can Watch TV Programs normally-Stop for a while-Pull out the smart card-Put back the smart card of the original machine-Turn off the code copy machine-Turn on, you can watch normally. E11 system error You can first turn off the set-top box, take out the encryption card from the set-top box, reinsert the encryption card and then power on the test machine to see if it returns to normal, if it still doesn't work, then you can only contact the franchise store to re-open an account or replace the encryption card.

Summary. Pro, the digital TV display 12 area is incorrect, which is generally caused by the upgrade of the server connected to the set-top box, and the authentication application of the set-top box smart card cannot be passed.

Digital cable TV display"The e12 region is incorrect"What's going on?

Good morning, dear, and may your day start now.

Pro,Digital TV display 12 area is incorrect,Generally caused by the set-top box connected to the server upgrade spare,Unable to pass the set-top box smart card authentication application to guide this ruined pickpocket。

To put it simply, it is caused by the mismatch between your smart card and the set-top box, if only part of the TV station is incorrect, it should be the cause of the TV station, you can call the telephone Weizhen phone to the TV station for consultation.

You can try to restart the set-top box and TV, if not, it is recommended that you call the TV station** for consultation.

You can also take your set-top box to a cable station technician for repair.