-
Anonymous users2024-02-06What set-top box are you???
The green light is generally displayed when the set-top box is successfully started and the signal is detected, otherwise it will not be displayed.
If you have been stuck in the startup, it means that your set-top box can not be successfully started, and it has not yet reached the step of turning on the green light, it should be that there is a problem with your set-top box, if it is with the system, it is recommended to re-flash the system, if not, please find someone to fix it.
-
Anonymous users2024-02-05Turn off the power and try it on a restart!
-
Anonymous users2024-02-04If the green light is not on, the signal is not good, it may be a problem with the antenna, find a master to take a look.
-
Anonymous users2024-02-031、There are three reasons why the TV has been displayed in loading after it is connected to the Internet:
1.Network bandwidth.
Not enough to be commonly known as internet speed.
Slow; 2.The TV system is a small CPU that does the memory and is slow or unable to run this software;
3.Insufficient or limited traffic to the server providing the source;
2. According to the above three solutions:
1.Insufficient bandwidth: increase the network speed, such as changing from 50m fiber to 100m fiber;
2.The TV has not enough memory: The solution to this problem is to reflash the system or uninstall the software and install new software. Both of these solutions require TV drama service providers to provide themselves that cannot be solved;
3.The signal source server does not have enough traffic: you can change the time period** or change the program**.
-
Anonymous users2024-02-02Summary. 1. The network signal is poor, it is recommended to restart the network.
2. It takes a certain amount of time to buffer the data when you turn on the TV, so it is recommended to wait for a while.
Why does the TV keep showing loading when it's turned on?
1、The network signal is relatively poor,It is recommended to restart the network2、When you turn on the TV, it takes a certain amount of time to buffer the data,It is recommended to wait for a while。
Reboot. Rebooted or useless.
Cable or over-the-air.
Cable television. Restart the set-top box.
-
Anonymous users2024-02-01Summary. 1、There are three reasons why the TV has been displayed in loading after it is connected to the Internet:
1. Insufficient network bandwidth is commonly known as slow network speed;
2. The memory of the TV system is small, the CPU runs slowly, or the software cannot be run;
The TV turns on and the system is loading.
1、There are three reasons why the TV has been displayed in loading after it is connected to the Internet:1、The network bandwidth is not enough, commonly known as slow network speed; 2. The memory of the TV system is small, the CPU runs slowly, or it is impossible to amuse the brother silver to run the software; 3. The server traffic that provides the signal source is insufficient or limited; Hope it helps.
Ask about custom messages].
1. There is no signal or the signal is relatively poor, mainly because the signal will be affected by various factors such as terrain, landform, and high-rise buildings in the process of propagation, such as the current location is in a relatively closed place, and the signal may be affected. >>>More
1.Try to restart the tablet;
3.Back up your data, factory reset attempt. >>>More
1. Press the Power + Volume Down buttons at the same time to force a restart. >>>More
。1.In the process of installing win10 official version of the system, when there is a blue screen and infinite restart failure, we first need to disable the "graphics card driver". When the computer restarts indefinitely, press and hold the power button to force it to shut down, and then turn it on again to automatically enter the repair state. >>>More