How to choose the right steel radiator specifications?

It is recommended that you choose radiators that will not rust, because the heating capacity is rusty, right.

It is best that the specifications of this radiator should be coordinated with the interior decoration.

Steel radiators have become the mainstream products in the heating equipment market, but consumers are not aware of the types of steel radiators and the size and specifications of steel radiators, so it is difficult to calculate the number of pieces required. So, what exactly are the specifications of steel radiators?

The standard height of common steel radiators manufactured by HVAC equipment manufacturers is 600mm, 1200mm, 1500mm, and 1800mm, and there are many stocks. Consumers can calculate the number of pieces used according to the different specifications and specific widths of steel radiators.

mm wide radiator, small and fine single piece width of 50mm, piece spacing is 10mm, thickness according to different needs, can be 50mm, 60mm, 98mm and other combinations. The width of the film is relatively narrow, the water flow per unit time is less, the flow rate is fast, and the heat dissipation is also faster, which is an economical one.

mm wide radiator, large water flow single piece width of 60mm, piece spacing is 10mm radiator, the width increases, can accommodate more water, storage heat, monolithic heat dissipation is larger, but the temperature rise is slower than 50mm. In addition, the general 1800mm high 60mm wide radiator, a piece can heat 3 square meters of room area, is a more cost-effective, good decorative performance of a radiator.

At the same time, you can choose a variety of colors to match the home decoration; It can also be hung on the wall to save space. For example, the height of 300mm, 400mm, 500mm and other radiator specifications, these are customized according to the needs of different consumers, and are not commonly used specifications and models. Consumers need to contact the radiator manufacturer in advance in order to arrange production.

It is mainly based on the hall in the house to calculate the size of the radiator.

Engineering steel radiator material: high-quality low-carbon steel (imported raw materials).

Engineering steel radiator technology: steel column radiator technology.

The steel radiator for engineering use advanced argon arc welding equipment and technology, with high welding strength and strong pressure-bearing capacity;

Unique surface shot blasting and pickling phosphating treatment of engineering steel radiators;

The surface of the steel radiator for engineering use ultra-fine nano anti-corrosion coating, and the vacuum filling anti-corrosion coating is uniform and infinitely anti-corrosion;

The steel radiator for engineering is imported with ultraviolet anti-ultraviolet all-polyester plastic powder, which has stronger adhesion and a smooth and bright surface;

The steel radiator for engineering has been tested by 100% air tightness pressure several times, and the pressure bearing capacity is strong, and the test pressure is.

Personality characteristics of steel radiators for engineering:

The steel radiator for engineering is derived from the simple two-column shape design in Europe, which is beautiful and classic;

Engineering steel radiators have stable heat dissipation performance and are suitable for all kinds of heating, water quality and systems.

What are the models and specifications of steel radiators? Steel radiator specifications and models.

1. The model has 100 * 60, 75 * 75, 72 * 60, 50 * 85, 132 * 60, 80 * 80, the height is generally in the range of 300mm 1800mm, the common specifications on the market are generally single column, double column or three columns, when choosing products, according to their own needs and indoor size, to ensure that their choice is appropriate.

2. Among them, G stands for steel, usually each manufacturer model is identified as such, X2, represents the structure of steel radiators, Z stands for steel column radiators, C stands for steel finned tube convection radiators, and B represents steel plate radiators.

3. X3, on behalf of the specifications of the steel radiator, if it is 2, it refers to two columns, that is, it refers to 3 columns, X4, on behalf of the center distance, such as the common 600, it represents 600mm center distance, and the steel radiator model last, refers to the maximum working pressure.

4. According to the national standard for steel radiators GB29039-2012 "Steel Heating Radiators", the types and models of radiators are as follows: steel column radiator model is GZ, steel finned tube convection radiator model is GC, steel plate radiator model is marked as GB, steel bathroom radiator national standard is not specified, steel bathroom radiator standard is PGZT or PGZBK.

Steel radiator models and specifications are 100 * 60, 75 * 75, 72 * 60, 50 * 85, 132 * 60, 80 * 80, the height is generally in the range of 300mm 1800mm, the common specifications on the market are generally single column, double column or three columns, when choosing products, according to their own needs and the size of the room, to ensure that their choice is appropriate.

2. What is the national standard for steel radiators?

According to the national standard for steel radiators GB29039-2012 "Steel Heating Radiators", the types and models of radiators are as follows: steel column radiator model is GZ, steel finned tube convection radiator model is GC, steel plate radiator model is marked as GB, steel bathroom radiator national standard is not specified, steel bathroom radiator standard is PGZT or PGZBK.

Third, how to mark the steel radiator model and specification manufacturer.

Generally, the model specifications of steel radiators are marked as x1, g, x2,.

Among them, X1 is the brand logo of the radiator manufacturer.

G, which stands for steel, is usually identified as such for each manufacturer's model.

X2 represents the structure of the steel radiator, Z represents the steel column radiator, C represents the steel finned tube convection radiator, and B represents the steel plate radiator.

x3 represents the specification of the steel radiator, if it is 2, it refers to two columns, and 3 refers to three columns.

x4 represents the center distance, such as the common 600, which represents the center distance of 600mm.

Steel radiator model last, refers to the maximum working pressure of.

Steel radiators are mainly divided into different heights and widths, radiator manufacturers can produce radiators with a height of meters to meet the needs of different users, and steel radiators can be matched in different positions. There are also many models of radiator width, the common width of the radiator is 60mm, called steel 60 series, this model is the most common and the most installed product. Secondly, there are 50mm wide radiators, steel 50 series, which are relatively small and cute, and the engineering prefers this product.

There is also a steel 70 series, this steel radiator is high-end atmosphere, large waterway, large water storage, fast heating and good thermal insulation effect, suitable for central heating users.

The model has 100 * 60, 75 * 75, 72 * 60, 50 * 85, 132 * 60, 80 * 80, the height is generally in the range of 300mm 1800mm, the common specifications on the market are generally single column, double column or three columns, when choosing products, according to their own needs and the size of the room, to ensure that their choice is appropriate.

There are many factors such as length, height and thickness, interface center distance, interface specifications, number of columns, number of groups, etc.

Today I went to the decoration market and found that there are a lot of radiator materials, and I want to ask which one is better.

1. Generally speaking, the height of the radiator depends on the height of the window sill at home, and the room with floor-to-ceiling windows and large bay windows should choose a low style; If the home is not central heating, but self-heating, due to the low pressure of the system, the purchase of products below the meter can ensure the heating effect.

2. At present, there are *75 and other models of steel radiators, and *55 and other models of copper and aluminum composite radiators. Generally speaking, the width and thickness of the radiator are larger, the flow of water per unit time is more, the heat stored is more, the heat dissipation of a single piece is larger, and the heat preservation is relatively better, but the temperature rise will be slower; If the width is narrow and the thickness is small, the situation is the opposite of the above, and the user can choose according to the actual heat demand at home.

3. The height of the radiator is also an important parameter, generally between 300-1800mm, and various heights have different applicable spaces. For example, in rooms with floor-to-ceiling windows and large bay windows, low radiators should be installed under the windows, which can effectively use the space, facilitate the balanced heat dissipation of the radiators, and realize both heating and decoration. Judging from the installation of St. Lawrence radiators, most families will choose higher sizes such as 1500mm and 1600mm in the living room and bedroom, and 600mm high radiators will be used in the kitchen and bathroom, or special bathroom radiators.

4. The size of 600mm, 1500mm, 1600mm, and 1800mm on the general radiator refers to the full height. The difference between this distance and the full height is 50-90mm, so when purchasing, you must figure out whether the distance or full height is marked above, otherwise it will lead to the inability to install and bring unnecessary trouble to the later construction.

5. The size marked on the general radiator is 600mm, 1500mm, 1600mm, and 1800mm, which refers to the full height. The difference between this distance and the full height is 50-90mm, so when purchasing, you must figure out whether the distance or full height is marked above, otherwise it will lead to the inability to install and bring unnecessary trouble to the later construction.