What happened to the Samsung S6 system interface stopped 5

1.Settings - Find "Application Manager" - (All) - Find apps that don't work - (Storage) - Clear data.

3.If you also get a stop prompt when you run the built-in program, check if your phone has the latest firmware version and upgrade your machine to the latest version.

If the problem still exists, please bring the purchase invoice, repair card and machine to the service center, and the professional after-sales engineer will help test it.

An error message appears on the phone screen that Touchwiz Home has stopped, it is recommended that you:

1.Turn off your phone and restart it.

2.Update your phone's system version: Settings - About Phone (About Device) - Manual Update Automatic Update (Software Update System Update - Update). Note: Please back up the data (contacts, messages, **, etc.) in your device before upgrading.

3.If you have the latest version, please back up the data in your phone and try to restore the factory settings.

If the problem persists, it is recommended that you bring the purchase invoice, repair card and mobile phone to the local Samsung service center for professional engineers to help you test.

It is recommended to turn off and restart your phone.

It could be a short circuit or a program failure, the solution:

1. First of all, it is recommended to press and hold the power button to restart, if there is no response, you can remove the battery and reinstall it before booting it.

2. Try to replace other original batteries.

3. Try to enter safe mode, press and hold the menu button in the lower left corner when the Samsung logo appears when the phone is turned on, until you enter the safe mode, if you can enter, try to back up important data and restore it to factory settings.

4. If you cannot enter the safe mode, it is recommended to send the mobile phone to the nearest after-sales service center for testing and maintenance.

2. If the mobile phone has stopped setting, it is recommended:

1) Restart your phone and try again.

3) Back up the data in your phone, and then try to do a factory reset (Settings - Reset Privacy - Factory Reset).

If your Samsung phone has a boot screen but can't boot on the standby screen normally, you can do the following:

1.Take out the SIM card and SD card at the same time and try to power on again.

2.When you reboot, when you see the "Samsung" logo to mark this sail, press and hold the [Menu Key] (left touch sensitive button) until the word "Safe Mode" appears in the lower left corner of the screen, then let go, back up data (e.g., contacts, SMS, **, etc.), and restore factory settings.

3.If you can't enter the safety mode or the problem persists after operation, it is recommended to bring the mobile phone three packs certificate and send the mobile phone to the nearest Samsung service center for testing and repair.

We recommend that you do the following:

1. Try after restarting;

2. Check whether the phone has a system push notification, and if so, update the phone to the latest system version.

3. Observe after uninstalling the recently installed third-party app.

4. Back up data (contacts, text messages, **, etc.) and try to restore factory settings.

If the problem persists, it is recommended that you bring your mobile phone, purchase invoice, and repair card to your local Samsung after-sales service center for testing.

1. Turn off your phone and restart it.

2. It is recommended to go to Settings - Application Manager - All - Samsung Chinese Input Method - Clear Data Attempt.

3. Verify whether the new input method or third-party software is installed in the mobile phone, it is recommended to uninstall it 4. Back up the mobile phone data (**book, text messages, **, etc.), and restore the mobile phone to factory settings (settings-reset-factory reset).

If the above methods still do not solve the problem, it is recommended to send your phone to the nearest Samsung service center.

Turn on the computer and press the volume down button to enter the Android safe mode,Then reset the input method and turn it on again,The input method is normal。

Just now my mobile phone is also this problem,Messing around with myself,Finally recovered,My mobile phone was previously installed with the Xunfei input method,If it has not been installed,Reinstall a Xunfei input method,Isn't it impossible to type at present?,You can use the voice to say the Xunfei input method to install it,After the installation is completed, click on the check and check the Xunfei input method.

1. If the mobile phone has a new firmware, there will be a push update notification, and the firmware upgrade can optimize some functions of the machine and improve the mobile phone system, making the mobile phone system more stable and smooth.

2. If the update icon appears in the upper left corner of the phone screen, it means that the software update function is turned on, and the phone will be automatically reminded that there is a newer version that needs to be updated. If you want to cancel the update reminder, please operate: Dust Boy with Application - Settings - (General) - About Device - System Update - Automatic Update - Uncheck Box.

You can press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device, if the operation is invalid or the problem persists, it is recommended to send the phone to the nearest service center for testing and treatment.

Hello dear Samsung users:

According to your description, you can try to press and hold the power button for more than 10 seconds to try to exit, if the problem persists, it is recommended to send the phone to the nearest Samsung service center for further testing.

It is recommended that you apply for "appointment to store" on Samsung's official website to enjoy priority repair services

After the appointment is successful, please bring your machine, invoice and warranty card to the service center where you made the appointment on time.

Comments, suggestions, complaints, please click: