What is the difference between a floor scrubber and a sweeper? Which one is used for the factory flo

Sweepers and floor scrubbers are explained on the surface that one is sweeping and the other is washing. The sweeper mainly solves dust such as ground dust, iron filings, small gravel, and paper scraps. The floor scrubber mainly cleans the oil stains on the floor, the stains that are difficult to clean.

If there is a lot of dust on the factory floor, it is recommended to choose a sweeper, and choose a floor scrubber for dirt such as oil stains! Or the sweeper and the scrubber cooperate, the sweeper sweeps the big garbage, and the scrubber cooperates with the scrubbing to absorb the water! Quickly restore the cleanliness of the site!

Yangzi brand sweepers and floor scrubbers are currently very popular in the market, you can consider them!

Floor scrubber, as the name suggests, is to scrub the floor, instead of traditional cleaning tools such as mops and buckets, clean the ground with water, and then suck the sewage clean. The floor scrubber is suitable for all hard floors: epoxy floors, marble floors, tile floors and other smooth floors, and the cleaning efficiency is extremely high with a floor scrubber; The floor scrubber can also clean the cement floor, terrazzo floor, asphalt floor and other coarse super floors, as long as the consumables and accessories of the floor scrubber are used reasonably, the garbage on the floor of different materials can be cleaned.

After the floor scrubber cleans the floor stains, it can also absorb the moisture of the ground, so there is no need to clean it twice, and the floor will be as clean as new all of a sudden.

Sweepers, as the name suggests, are sweeping the floor, replacing traditional cleaning tools such as brooms and dustpans. Most of the sweepers are suitable for cement floors, asphalt floors, plastic runways, small square bricks and other grounds, industrial plants, property community outdoors, scenic spots and other places; It can also be used in indoor places, because there is less indoor garbage, so there are generally more indoor floor scrubbers.

If it is an indoor floor and not too dirty, it is recommended to use a floor scrubber. If there is a lot of garbage and you need to clean it every day, then use a sweeper. Kärcher's floor scrubbers and sweepers are relatively famous, you can refer to them

Both sweepers and scrubbers are suitable for use on flat ground.

1. Flat ground;

2. Hard ground;

3. Open ground;

4. a tile floor;

5. a marble floor;

6. an epoxy ground;

7. a cement floor;

The common feature of different factories is that they have a large area, so it is difficult to clean the floor without leaving dead corners and without dust. It is too waste of financial resources and manpower to clean by hand, so you can only use a sweeper to clean. Today, Kuaiba will take you to know the sweepers commonly used in factories and their advantages and characteristics.

KB-SD1280 small sweeper is mainly used in small areas in factory workshops and factory parks.

The advantages of this type of small sweeper are its small size, can be applied to any place, can enter the freight elevator, and is easy to enter and exit on all floors. And the cleaning effect is no different from other sweepers except for the limited area.

KB-SD1880 medium-sized ride-on sweeper is used in large factory workshops, warehouses, industrial parks and surrounding areas.

The biggest difference between a medium-sized ride-on sweeper and a small sweeper is the work efficiency. The double-sided brushes of medium-sized ride-on sweepers are one size larger than those of small side brushes, and when sweeping the floor, both the width and capacity are more than double. The built-in bin is twice as large as the smaller one.

Medium-sized sweepers used in factories are generally semi-enclosed or roof-type configurations, while small sweepers are mostly open-topped.

KB-SD2160 large ride-on sweeper is used in the factory park and peripheral areas.

Large sweepers are mostly used in large enterprise factories with an area of tens of thousands, and are generally not used by small and medium-sized enterprises. Large sweepers are different in every way compared to small and medium-sized sweepers.

In terms of efficiency: it is ten times that of manual cleaning, 4-5 times that of small sweepers, and 2-3 times that of medium-sized sweepers.

Semi-enclosed and fully enclosed car structure. It is more atmospheric than small and medium-sized, and the operator does not rain when driving, the wind does not blow, the sun does not shine, and you can also listen to the small **.

How to choose a ride-on sweeper?

1.In hot summers or cold winters, operators need to endure high temperatures or cold. If there is no special need, a semi-enclosed sweeper is more suitable. There is also the option of a fully enclosed ride-on sweeper equipped with air conditioning.

2.It is advisable to choose the size of the cleaner, the condition of the road surface in the area to be cleaned, and the total width of the road surface according to your needs.

How to choose a ride-on sweeper? Large industrial sweepers are what we call ride-on sweepers. Generally speaking, these ride-on sweepers are widely used in factories, workshops, sanitary streets, and other places, and are popular with users.

In recent years, with the increasing requirements for environmental protection, the requirements for environmental sanitation have become more and more stringent. For large areas such as factory floors and sanitary streets, traditional broom cleaning methods can no longer meet the cleaning requirements. Therefore, driving sweepers will become so popular after the appearance of them.

There is no such thing as a sweeper in the general factory, because there may be a lack of anything in the factory, but there is no shortage of people, such as cleaning, you can do it with some people at will, and there is no need to buy such things as sweepers.

There are many parts in the factory, and they are generally used by sweeping aunts! If the factory is large, like Foxconn, you can use the kind that looks like a small tractor with a big disc at the bottom, and people can sit on it and drive it. I won't talk about the brand, you can look for it yourself.

We use a large vacuum cleaner to clean here, and we still use people for large objects.

Electric sweeper, electric sweeper replaces manual cleaning work in the factory.

Factory sweepers can reduce the cost of hiring cleaners, and at the same time can save a lot of workers' wage costs, as long as there is electricity, you can sweep the floor.

Most of them are manual sweeping, don't look down on the profession of cleaning, you can also support yourself and your family by relying on it, and leave some way for those people to live.

Medium-sized sweepers used in factories are semi-semi-enclosed or have a ceiling with a floor distance, while when using small sweepers, they are mostly open-top.

It is recommended to take a look at the kind in shopping malls and hospitals, large floor scrubbers.

It's like a person driving this little car.

1. It is necessary to clarify what the factory produces, the ground garbage or items that need to be cleaned up, such as whether there is water or liquid, or blocks.

2. How big is the area and what effect is needed.

3. Obstacle situation, how much sensitivity or requirement is required.

4. The time situation needs to be synchronized with production, and it needs to have a sensitive avoidance function, or it is necessary to clean up the peak at night.

5. Sweeper or sweeper?

6. Intuitively, it is nothing more than: household sweepers, floor scrubbers in shopping malls and hospitals, and driving sweepers on the road.

Factories generally use manual sweeping, not sweepers.

Ride-on sweepers or walk-behind sweepers.

Factories generally sweep the floor manually, and they all take turns.

Factories generally use manual sweeping.

Cleaning power. From the perspective of ground cleaning ability,At present, most of the sweeping robots and floor scrubbers on the market have the dual functions of vacuuming and air and land mopping,The big difference between the two is first in the cleaning sequence,The sweeping robot is to vacuum first and then mop the floor,And the floor scrubber is suction and mopping at the same time。

Further divide and distinguish the cleaning ability,In terms of the size of the suction,The sweeping robot is limited by the need to maintain the relative balance of the parts carried in the smaller and thinner fuselage,So the suction power of the sweeping robot is generally not as large as the floor scrubber,Some dust and garbage embedded in the ground gap may not be completely inhaled。 On the contrary, the larger suction power of the floor scrubber can cope with more diverse cleaning needs, for example, in the unique suction mode of some floor scrubbers, the floor scrubber can quickly absorb a large area of stagnant water on the ground, which is very suitable for balcony scenes that are prone to water accumulation.

The second is the mopping performance, the sweeping robot generally uses a mop to realize the mopping function, such as the vibrating flat mop mounted on the stone self-cleaning sweeping and mopping robot G10S, which is equipped with the patented technology of sonic vibration mopping developed by the stone technology, which can realize linear horizontal high-frequency vibration, and cooperate with the lifting module to actively cover the ground and rub it strongly, bringing 3000 minutes of high-frequency vibration to effectively disintegrate the ground stains. For example, Ecovacs DEEBOT X1 Omni uses a rotating mop, which is equipped with Ecovacs' unique OZMO Turbo rotary pressure mopping system, which rotates at high speed through double mops and imitates the manual mopping mode to increase the pressure downward, strengthen the contact area and friction between the mop and the ground, and assist in more efficient cleaning.

When the factory buys a floor scrubber, it is necessary to determine the model according to its own factory environment, and if the area of the factory is very large and the road is very spacious, it is very suitable to buy a ride-on floor scrubber. If you want to clean a small area, and some areas are narrow, you can buy a walk-behind floor scrubber. The walk-behind floor scrubber is flexible and suitable for some narrow roads, so small areas are suitable for this kind of equipment.

Then, when choosing a manufacturer, we should pay attention to the manufacturer's production strength and production level, as well as the manufacturer's after-sales ability. A company with strong production strength, the production of products, and the after-sales service is also very convenient, is a good choice. Don't rush to buy products, you can shop around after deciding which floor scrubber to buy.

For example, Liang Yuxi floor scrubber manufacturers, the country has 37 supermarket chains, the products are factory direct sales, the national joint warranty, unified. In terms of after-sales, when there is a problem with the equipment, it can be repaired and dealt with by the nearest company in a timely manner, so as to ensure that users can get after-sales treatment in a timely manner, and it will not affect the progress of other work.

From the perspective of ground cleaning capacity, most of the sweeping robots and floor scrubbers on the market have the dual functions of vacuuming and mopping, the big difference between the two is first in the cleaning sequence, the sweeping robot is to vacuum first and then mop the floor, and the floor scrubber is to suction and mop at the same time.

Further divide and distinguish the cleaning ability,In terms of the size of the suction,The sweeping robot is limited by the need to maintain the relative balance of the parts carried in a smaller and slimmer body,So the suction power of the sweeping robot is generally not as large as the washing machine,Some dust and garbage embedded in the ground gap may not be completely inhaled。 On the contrary, the larger suction power of the floor scrubber can cope with more diverse cleaning needs, for example, in the unique suction mode of some floor scrubbers, the floor scrubber can quickly absorb a large area of stagnant water on the ground, which is very suitable for balcony scenes that are prone to water accumulation.

The second is the mopping performance, the sweeping robot generally uses a mop to realize the mopping function, such as the vibrating flat mop mounted on the stone self-cleaning sweeping and mopping robot G10S, which is equipped with the patented technology of sonic vibration mopping developed by the stone technology, which can realize linear horizontal high-frequency vibration, and cooperate with the lifting module to actively cover the ground and rub it strongly, bringing 3000 minutes of high-frequency vibration to effectively disintegrate the ground stains. For example, Ecovacs DEEBOT X1 Omni uses a rotating mop, which is equipped with Ecovacs' unique OZMO Turbo rotary pressure mopping system, which rotates at high speed through double mops and imitates the manual mopping mode to increase the pressure downward, strengthen the contact area and friction between the mop and the ground, and assist in more efficient cleaning.

The floor scrubber generally uses a roller brush to realize the mopping function, and the ground is cleaned through the high-speed rotation of the roller brush. In addition, with the characteristics of the high speed of the roller brush and the hand-held characteristics of the floor scrubber, the floor scrubber can repeatedly clean the stubborn stains on the dry floor, so the floor scrubber has a better cleaning effect on the stubborn stains on the dry floor.

Definition: Floor scrubber, also known as automatic floor scrubber, scientific name is automatic floor scrubber dryer.

The floor mopping machine cannot be blotted dry, and it should be used at the same time with a suction machine. The floor mopping machine is only available in the wire type. Swing operation from side to side, and the operation requires a bit of technical content.

Difference: To put it simply, the floor scrubber is an organic combination of the floor cleaner and the suction machine. Its brush plate is located at the front of the machine, with a clean water tank and a sewage tank in the middle (or above), and the control panel and suction squeegee are located at the rear of the machine (cab machines, the control panel is usually at the front of the machine).

It's all the same, it's all a machine. It's just a different name.

The sweeper does not have the ability to scrub the floor, and the floor scrubber does not have the function of sweeping the floor, depending on your own needs.