What are the maintenance measures for fire fighting equipment?

The maintenance measures for fire-fighting equipment are as follows:

1.Maintenance of fire extinguishers:

Regularly inspect the appearance of the fire extinguisher to remove dust and dirt.

Check the pressure indicator of the fire extinguisher to make sure the pressure is normal.

Gently invert the extinguisher to prevent the agent from agglomerating.

Check the fire extinguisher label and expiration date to ensure that it is within the expiration date.

The dry powder fire extinguisher is overhauled every year and the dry powder is replaced.

2.Maintenance of fire extinguishing water pipes and fire hydrants:

Regularly inspect water pipes and fire hydrant systems to ensure that water supply pipes are free of clogs and securely connected.

Check the water pipe valve to ensure flexible opening and closing, no leakage.

Clean the fire hydrant outlet and test the water flow to ensure a normal water supply.

3.Maintenance of fire alarms:

Test your fire alarm regularly to make sure it's working properly.

Clean up fire alarms and surrounding dust and dirt.

Check the battery of the fire alarm and replace it in time when the battery is low.

4.Maintenance of smoke detectors and flame detectors:

Regularly test smoke detectors and flame detectors to ensure they are sensitive and functional.

Sweep the detector and the surrounding dust and dirt.

Check the battery level and replace it in time.

5.Maintenance of escape routes and evacuation systems:

Regularly sweep passages and evacuation signs to ensure they are clearly visible.

Check that the evacuation route diagram and indicator lights are in good condition.

Regularly inspect elevator automatic evacuation equipment and emergency lighting.

The above are some common fire-fighting equipment maintenance measures, and the specific details and operation methods also need to be maintained accordingly according to different types of fire-fighting equipment and equipment manuals. In addition, it is recommended to make a maintenance plan according to the specified time and record the details of equipment maintenance so that problems can be detected in time and corresponding measures can be taken.

Lituo Xin'an is a leading brand in the fire intelligent maintenance industry focusing on the high-end market and insisting on winning by quality, carrying out full life cycle management, monitoring and early warning of the fire safety status of buildings, and proposing innovative solutions. The new model of intelligent maintenance realizes the dual guarantee of online and offline, empowers, improves the quality and efficiency of the fire safety of the unit building, opens a new track in the traditional fire protection industry, refreshes the industry pattern, and leads the industry to develop in the direction of high quality and high quality.

The maintenance of fire-fighting equipment is a regular work, which requires perseverance and unremitting efforts to make fire-fighting facilities and equipment in a long-term good condition.

In the technical state, therefore, the maintenance of fire-fighting facilities and equipment is the top priority in the property service work. Therefore, property service enterprises focus on regular maintenance of fire-fighting equipment, facilities and fire-fighting equipment in the property area in the daily maintenance to ensure that they must be in good condition at ordinary times. Property service enterprises should do a good job in the maintenance of the following aspects:

1) Fire-fighting equipment, facilities and equipment are not allowed to be misappropriated and moved at will.

2) The fire alarm system is tested every six months.

3) The fire hydrant in the building shall be tested with water once a quarter to check the operation status of the water supply system.

Hello, the above questions will be answered by me. Operating procedures for the use of fire-fighting equipment 1. Portable dry powder fire extinguishers are used about 5 meters away from the flame. Pull out the safety pin first, hold the nozzle with one hand, hold the pressure handle and handle with the other hand, press down hard, and the dry powder will be sprayed out.

Aim the nozzle at the root of the flame and swing it left and right. Dry chemical fire extinguishers should always be kept upright during the powder spraying process, and should not be used horizontally or upside down. 3. First of all, open the fire hydrant box, take out the hose, throw the hose in the direction of the fire, connect the fire hydrant at one end, and connect the water gun at the other end.

Next, rotate the fire hydrant handwheel counterclockwise to extinguish the fire. 4. The use of outdoor fire hydrants first spreads the hose in the direction of the fire, and then uses a special wrench to open the end cover of the fire hydrant, connects one end of the fire hose to the fire hydrant interface, and the other end is connected to the water gun. 1. The full-time administrator is responsible for the daily use and management of fire-fighting facilities and the full-time administrator checks the use of fire-fighting facilities every day to keep the facilities clean, hygienic and intact.

2. The maintenance and regular technical testing of the technical performance of fire-fighting facilities and fire-fighting equipment shall be responsible for the centralized management department of fire-fighting work, and a full-time administrator shall be set up to check and understand the operation of fire-fighting equipment on time every day. Check the operation records, listen to the opinions of the personnel on duty, and arrange maintenance in time if abnormalities are found, so that the equipment can be kept in good technical condition. 3. Regular testing of fire-fighting facilities and fire-fighting equipment

1) The test of the smoke and temperature sensing alarm system shall be organized and implemented by the centralized management department of fire protection work, and the security department shall participate, and each smoke and temperature sensing probe shall be tested in rotation at least once a year. (2) Fire pumps, sprinkler pumps, and water curtain pumps are tested once a month to check whether they are complete and easy to use. (3) The positive pressure air supply and smoke prevention and exhaust system are tested once every six months.

4) Indoor fire hydrant and sprinkler water discharge test once a quarter. (5) For the test of other fire-fighting equipment, the test time shall be determined according to different circumstances. 4. Management of fire-fighting equipment

1) Regularly check and change the dressing of the fire extinguisher twice a year during the winter and summer prevention periods. (2) Send special personnel to manage and regularly inspect the fire-fighting equipment to ensure that it is in good condition. (3) The fire-fighting equipment should be checked frequently, and if it is found that it is lost or damaged, it should be immediately supplemented and reported to the leadership.

4) The fire-fighting equipment of each department shall be managed by the department and designated personnel shall be responsible. Collapse I hope it can help you!

The fire maintenance requirements are as follows:

1. Carry out regular inspection, repair and maintenance of the fire protection facilities entrusted to the maintenance of the building in accordance with the regulations;

2. Repair the faults of the fire-fighting facilities in time to ensure their normal operation;

3. Check the maintenance of fire protection facilities once a quarter, report to the Municipal Public Security Fire Bureau once every six months, and report immediately when there is a serious failure and has to be out of service;

4. Adhere to the 24-hour duty system, accept the fault report of the entrusting unit about the fire protection facilities at any time and eliminate it in time;

5. If the maintenance is not in place, resulting in the loss of the effect of the fire-fighting facilities and causing consequences, they must bear legal responsibility.

1. Check the power switch and pipeline valve of the building fire protection facilities, which should indicate the normal operation position, and identify the state of opening and closing; For valves that need to be kept normally open or normally closed, limit measures such as lead seals and labels should be taken.

2. Check the fire power supply and distribution facilities: the working status of the fire power supply, the status of the self-provided power generation equipment, the environment of the fire power distribution room and generator room, and the working status of the end switching device of the fire power supply.

3. Check the fire water supply facilities: the appearance of the fire water tank, the appearance of the fire water tank, the working status of the fire pump and the control cabinet, the working state of the stabilizer pump, the booster pump and the pneumatic water tank, the appearance and identification of the water pump combiner, the opening and closing status of the pipe network control valve, and the working environment of the pump room.