The role of the wheel balance weight, the role of the car tire balance weight

If your tires are balanced, you don't need to hit the balance weight.

When doing the balance, the instrument will measure the unbalance of your tire, and then put a balance weight in the corresponding position, so that the centrifugal force is directed to the tire shaft when the tire rotates.

In many Western countries, the balance weight on the new car cannot exceed 5g, otherwise it must be replaced with new tires and wheels to leave the factory, but there are no relevant regulations in China at all, the largest I have seen is 40g, which is about the same size as a little finger.

Wheel balance weight, as the name suggests, the function of the balance weight is to keep the wheel dynamically balanced under high-speed rotation, and it is a counterweight component installed on the wheel of the vehicle.

The mass of each part of any object will be different, under static and low-speed rotation, the uneven mass will affect the stability of the object's rotation, the higher the rotation, the greater the vibration. The function of the balance weight is to minimize the mass gap of the wheels to achieve a relatively balanced state. ‍

If there is no abnormality, there is no need to install" No, the wheels will wear out prematurely, and the wheel bearings will be damaged.

To do four-wheel balancing, as long as there is a machine (four-wheel aligner), it is not troublesome at all!

Car. Target.

Wheels. Yes.

Tyre. Wheel.

composed of a whole. However, due to manufacturing reasons, it is impossible for the mass distribution of the parts of this whole to be very uniform. When the wheels of the car.

High-speed rotation. After getting up, a dynamic imbalance will be formed, resulting in.

Vehicle. The wheels shake while driving

Steering wheel. The phenomenon of vibration. In order to avoid this phenomenon or to eliminate it that has already occurred, it is necessary to make the wheels increase in a dynamic situation.

Counterweights. The method of making the wheels corrected each.

Edge. Part of the balance. This is corrected.

Process. It is often referred to as dynamic balance.

When you spot a vehicle while driving.

Drive at high speeds. When the steering wheel shakes or the wheels appear to have some kind of rhythm.

Abnormal noise. It is possible that it is time for the wheels to be balanced, especially if the tires are replaced, the hubs are replaced, or the tires are replaced, the wheels are hit too much, or due to bumps.

Balance weights. Loss, etc., should be done to balance the wheels. Don't underestimate the dynamic balance of the wheels, and don't underestimate the inconspicuous small lead blocks, if the dynamic balance of the wheels is not good, it will cause abnormal wear and tear of the tires, and it will also affect the stability of the vehicle. Especially with the front wheels, the vibrations will pass.

Steering system. Transmission to the steering wheel, not only affects the driver's driving, but also causes the steering system to loosen.

When the vehicle has been used for a long time, the user discovers.

Direction. Steering is heavy, shivering, mistracked, malaligned, not home-aligned, or the tires are worn on one side, wavy.

Weared, blocky.

Abnormal wear and tear such as abrasion, eccentric wear, and when the user is driving, the car feels floating, bumping, swaying and other phenomena, you should consider checking the wheel alignment value to see if it is.

Deviation. Too much, repair it in time.

Automobile tire balance weight is important for tire dynamic balance: 1. Tire balance weight tire balance weight is a counterweight component installed on the wheel of the vehicle, which is generally divided into two types, one is attached to the inner ring of the wheel hub, and the other is installed on the edge of the wheel hub; The function of the balance weight is to keep the wheel dynamically balanced under high-speed rotation; 2. The wheels of the car are composed of tires and hubs as a whole. However, due to manufacturing reasons, the mass distribution of the various parts of this whole cannot be very homogeneous.

When the wheels of the car rotate at high speed, a dynamic imbalance will be formed, resulting in the phenomenon that the wheels of the vehicle shake and the steering wheel vibrates while driving. In order to avoid this phenomenon or to eliminate the phenomenon that has already occurred, it is necessary to make the wheel correct the balance of each edge part by increasing the counterweight in the dynamic situation. This process of correction is often referred to as dynamic equilibrium; 3. It is very important to ensure the balance of tires, which not only helps to extend the service life of late tires and the normal performance of vehicles, but also contributes to the life safety of drivers.

Unbalanced tire movement can lead to irregular tire wear and unnecessary wear on the vehicle's suspension system, and unbalanced tire driving on the road can also cause vehicle bumps, resulting in driving fatigue.

Generally speaking, car tires are absolutely indispensable, so car tires are also guaranteed by a little lead in posture. Then the lead block installed on the car tire is also called the balance weight, which is an indispensable part of the car tire. The purpose of installing a balance weight on a tire is to prevent the tire from vibrating at high speed, which is related to the normal driving of the car.

What do the balance weights on car tires do?

What is the role of the counterweight on a car tire: role.

Tire Respect Balance Weights are counterweight components that are installed on the wheels of automobiles. It is to ensure that the wheels rotate at high speed, maintain a balanced state, make the car run smoothly, and make the driver and passengers feel comfortable. There are two ways to mount it, one is attached to the inner rim of the rim and the other is hung on the outer edge of the rim.

The key role of the counterweight is to maintain the dynamic balance of the wheels at high speeds.

A car wheel is a whole made up of tires and rims. However, due to the manufacturing process, the mass distribution of the whole parts cannot be very uniform. When the wheels of the car rotate at high speed, it will become a dynamic imbalance through development and change, which will cause the wheels to shake and the steering wheel to shake during driving.

In order to prevent this phenomenon or eliminate this phenomenon that has already occurred, it is necessary to correct the balance of the various edge sections of the wheels by increasing the counterweight in dynamic conditions. This correction process is called wheel balancing.

Most of the balance weights don't fall off. When we usually adjust the balance weight, most of them are basically after we tie the tires and repair the tires. Strictly speaking, we only need to do the balancing after removing the tires.

For example, after changing new tires or repairing tires, we basically have to do dynamic balancing. At this time, we use a balancing machine to test the balance of the tire hub in the state of motion, use a balance weight at the unbalance point, and replace the tire at ordinary times. Nowadays, the models we often encounter are basically front-wheel drive models.

The load on the front wheels is greater than the load on the rear wheels. After the necessary driving trips, the degree of fatigue and wear of the tires varies from place to place. Therefore, the position of the tires needs to be changed according to the number of trips traveled or road conditions, and the counterweight needs to be adjusted.

What does the counterweight on a car tire do? What are the consequences of an unbalanced wheel?

Tire counterweight is not only beneficial to prolong the service life of tires and the normal performance of the car, but also to the life safety of the driver. Unbalanced tire movement can affect irregular tire wear and unnecessary wear of the car's suspension system, and unbalanced tire driving on the road can also cause car bumps and cause driving fatigue.

That's all for today's car's introduction. The above is a brief introduction to the role of the balance weight on the car tire and the critical parts of the car tire. Then through a brief introduction to the car, it was found that the car only needs a little external fault resolution to drive better.

I hope the brief introduction of the car can help you solve the problem.

The balance weight on the tire is used to balance the weight, and the balance weight is what is needed in dynamic balancing. It is impossible for the rims and tires of a car to weigh the same in each part when they are manufactured, so the weight of each part of the wheel is not the same. If counterweights are not used, the wheels will shake abnormally when rotating at high speeds, affecting the stability and maneuverability of the car at high speeds.

Therefore, the wheels of the car need to be dynamically balanced. After the balancing test, the technician installs the counterweight where the weight is too light.

Tires are an important part of the car and are the only part of the car that comes into contact with the ground. This part is related to the driving stability and safety of the car.

Tires are rubber products, and rubber products will age after long-term use, so tires need to be replaced regularly.

Under normal circumstances, the tires installed on the car will last for four years, so it is recommended that you replace the tires every four years.

After replacing the tires with new ones, be sure to re-test the dynamic balance of each wheel.

Always check the tire pressure when using the car.

Air pressure is very important for tires, and the air pressure of the tires cannot be too high or too low.

If the air spine pressure is too low, the tires will deform in waves at high speeds.

If the air pressure is too high, the area of contact between the tire and the ground will be reduced, resulting in poor tire grip.

1. Tire balance is very important, it not only helps to prolong the service life of tires and the normal performance of the vehicle, but also contributes to the life safety of the driver; Pose slap.

2. The movement of unbalanced tires will lead to irregular wear of tires and unnecessary wear of the vehicle suspension system, and unbalanced tires driving on the road will also cause vehicle bumps, resulting in driving fatigue. Therefore, the tire balance weight will have an impact on the tire balance, depending on whether the owner feels it when driving the car;

3. The error value of general tire dynamic balance is 5g-10g. The smallest balance weight is 5g, and the balance weight is at least 5g tires that are at least 5g. If the balance is not good, the car will tremble when it reaches a certain speed, and there is damage to the tire bearing, which will affect the suspension body, so it is best to seize the time to replace it with a new one to prevent future troubles.