The benefits and disadvantages of modifying a car, what are the taboos of modifying a car

First, the advantages of car modification of natural gas: The increasingly serious air pollution and the imbalance of the energy structure force the first must speed up the transformation process of automobile gasification, and relative to individuals, in the face of the continuous growth of refined oil products, modified natural gas vehicles will bring you considerable economic benefits. Take Alto as an example:

1. The cost of modification is RMB, including RMB for conversion device, gas cylinder and other accessories, and RMB for labor costs; 2. Annual savings in the use of natural gas: According to the calculation of fuel consumption liters, cubic meters of gas, and kilometers of mileage per 100 kilometers, the annual expenditure on gasoline is yuan, and the annual expenditure on natural gas is yuan, which can save yuan in a year. (Gasoline is calculated by yuan liters, natural gas is calculated by yuan cubic meters) 3. You can also enjoy preferential policies for gas vehicles to save expenses.

4. The same calculation method is used for large buses, and each vehicle can save expenses per year. Second, the disadvantages of car modification of natural gas: 1, the power of the engine is significantly lower than the use of gasoline, the power of oil to gas is insufficient, 2, the endurance is weak, a tank of gas can usually only travel about 150 250 kilometers, and the endurance of gasoline vehicles is usually more than 500 kilometers.

3. When modifying, the huge cylinder is generally fixed in the trunk with an iron frame, which occupies a lot of storage space, and is forced to lose valuable available space, and at the same time increases the weight of the vehicle, resulting in vehicle driving load and fuel consumption. 4. There are few gas filling points and the gas stations are relatively remote, so sometimes you need to waste time waiting in line, or even go to a far suburb to replenish the gas;

Reduce the exhaust pressure, make the engine smooth at high speed, and increase the power!

But at low speeds, the engine works unsteadily and the torque is reduced! The general competitive class can consider straight row, and the civilian one can choose the tail drum with back pressure!

1. The engine is the core of the vehicle, and the law does not allow the modification of the engine.

2. The car modification cannot be changed back to the original appearance color and appearance, and the identity cannot be confirmed after the modified car makeover.

3. The interior trim parts of the car can be sent for replacement, but the design and electrical performance and other transformations cannot be replaced and upgraded at will.

4. Do not modify the exhaust pipe of the car, some people pursue a large and thick exhaust pipe thinking that it can increase the pressure, but in fact it has no effect, but it will be excessive noise.

Now there are more and more modification items, such as large surrounds, bumpers, rear wings, luggage racks and intake and exhaust, etc., and most businesses have been able to cope with them. In fact, it is better to change or add, because they are buying ready-made products to replace the original parts. But if you want to change the important parts of the car, such as the engine, gearbox and ECU, it's not something that every restructuring shop can handle.

There are not many shops that are renovated, but they are willing to do it and cannot afford it, because the requirements for technology, experience and theory are high. At present, most people's pursuit of individuality is limited to an alternative body sticker, tail, etc. So, so far, many of the so-called modding shops are actually a beauty upholstery shop.

The development of the automobile modification industry in Shanghai and other places is relatively leading, which has a lot to do with the economic development of these places to a certain extent. China's Hong Kong's car modification industry is more advanced than our mainland, mainly because of its special identity, is an international metropolis, her car modification culture is mainly influenced by Japan, with the increase in car ownership and the popularity of car consumption, China's second and third tier cities car modification market will gradually develop and grow. In the next 5-10 years, China's automobile modification industry will usher in a period of rapid development.

China's automobile modification industry is in the infancy of the industry development cycle, and the industry has high risks and investment returns. Car modification is a preference for automobile consumer culture, and it is a pursuit of personality and fashion. At present, in developed countries in Europe and the United States, almost 70% of the cars have been modified to a certain extent, including interior and exterior decoration, operation performance and power performance, etc., to better meet the needs of individuals.

According to the data, in 2013, China's automobile production and sales were 22.26 million and 23.06 million respectively, setting a new global historical record, and the market size of automobile modification was about 20 billion yuan. From horizontal comparison, China has surpassed the United States to become the world's largest automobile producer and consumer, but the size of the automobile modification market is less than 1 10 in the United States; As a late-developing country, China's car modification market has huge potential.

However, for car tuners and consumers, it must be in compliance with national laws in order to contribute to the development of the car modification market. Overall, the market prospect is still very broad.

With the continuous growth of the economy and the rapid development of the automotive industry, China's automobile modification industry will show tremendous growth and become an important part of the automobile industry chain. Personal income has increased significantly, and their individual consumption has also highlighted the growth trend... Here's what you need to prepare:

1. Investigate the specific details of the demand market in the automobile modification industry; Second, what is the customer structure of the automobile modification industry; 3. What are the regional differences in the demand of the automobile modification industry; Secondly, 1You have to have the technology and equipment, that's a must. From vehicle structure, in-engine enhancements, computer tuning, and various component upgrades, you need to have professional skills.

2. Your source of goods comes from **; Now the modification market is very prosperous, and there are many modification brands, have you taken into account the problem of accessories; If you don't have the right accessories, there is no supplier to supply, or the accessories fluctuate greatly, it is difficult for you to guarantee your profits! 3.In the end, your customers come from ** first; 4.

If you have a suitable storefront, you can learn about other well-known tuning shops; 5.Some other interpersonal relationships and market relations will be considered in the future. In short, it is useless to change the person before changing the car, and the concept does not change!

There is a difference in car repair for modified cars! It is recommended to study more and prepare more!

Car sales are declining year by year, but the sales of commercial vehicles and RVs are rising year by year, with the development of tourism and the improvement of customer quality, there are higher requirements for the comfort diversity of the car, the car is also known as the second house of the mobile, so the prospect of the car interior is still very good, after all, the modified car has relatively high requirements for customer flow and technical team, many people have ideas but no strength. You can go to the physical store to find out about the modification.

The sales of business vehicles and RVs are rising year by year, with the development of tourism and the improvement of customer quality, there are higher requirements for the comfort diversity of the car, the car is also known as the second house of the mobile, so the prospect of the car interior is still very good, after all, the modified car has relatively high requirements for customer flow and technical team, many people have ideas but no strength. You can go to the physical store to find out about the modification.

In recent years, traffic accidents caused by car modification have occurred frequently. However, there are few domestic laws and regulations regulating automobile modification, so the introduction of laws and regulations is an inevitable trend. From a national point of view, traffic safety is the primary consideration, so car modification will be more strictly regulated.

Now the development prospects of the auto repair industry are very good, the salary is also good, and the development prospects of auto repair are very good. With the continuous improvement of people's living standards, cars have changed from an unattainable luxury to a necessity in daily life. If you have a car, you have to repair and maintain your car.

The long queue of vehicles in front of the car repair shop shows that the development prospects of the auto repair industry are getting broader and broader on another level.

Yes, China's national quality of life has improved linearly, many people's personalized needs for cars have been far more than the original factory can meet, and now the reviting industry is rising, the prospect is still very good.

The domestic car modification rate in China is less than 10%, and there is a lot of room for development. From the perspective of human nature and the examples of advanced countries, there is a lot of room for the development of car modification. The gradual introduction of automobile modification industry standards is also a substantial positive for the industry.

After more than ten years, China's automobile modification market has gradually moved from underground to the ground; From the niche to the widespread; From singularity to plurality. During this period, the connotation and extension of the modification have been significantly expanded, and the industrial chain has been continuously lengthened and widened; Market acceptance and participation are increasing year by year, and the market scale is expanding rapidly. The prospects of the automobile modification industry, including the entire automotive industry, are very broad, if you are interested in development, it is recommended to pay more attention!

aqui te amo。

In general, there is room for development, now people's quality of life is more and more, the demand for cars is increasing, and everyone has a love for beauty, so the prospects are broad.

It's very good, it's the same as mobile phone remodeling, it's a violent industry.

It's good, now people are pursuing perfection, and they all want to have a car that they like. If you learn it well, it will be very profitable.

After we buy a car, many friends will definitely carry out more or less modifications to their cars. But I don't know that the modified car may have a great safety risk for Solanex, and the modified car is not very good in the process of annual inspection. What is the impact of blind modification of cars?

The author will explain it in detail to you below.

1. Blindly do sound insulation and noise reduction.

Risk Index Value:

Some car buyers pursue the actual effect of perfect sound insulation and noise reduction too much when doing car sound insulation and noise reduction, and even expect to not hear the sound of the car engine, which is also a problem, because the sound insulation and noise reduction are too complete, the driver will not be able to hear the sound of the road surface and the power plant, and will lose the detailed information of the real-time road conditions and vehicle conditions, which affects safe driving. Therefore, don't renovate the interior space of the car into a complete "silent world".

2. Blind "big encirclement".

Risk Index Value:

After installing the "big surrounding", all the cars are indeed good-looking, but they are also "installed" with safety risks. When installing the "big surrounding", it is necessary to disassemble the original bumper and then install it. In this way, if the car encounters a collision safety accident, the protection effect of the bumper will be weakened, and both people and cars will be seriously damaged.

3. Blindly modify speakers.

Risk Index Value:

In fact,The server of the speaker is the original soundtrack of the whole speaker system,It is the key to the sound quality,At the same time,Audio speaker、Split amplifier、Heavy sound and so on also have a great impact on the overall role of the speaker,If you ignore any of the stages,Even if the total number of An Chun 蚂s is more、No matter how complicated the auxiliary equipment,It is useless to improve the specific application efficacy of the speaker。 Therefore, it is not so much about doing some money-burning and laborious modifications as it is better to choose a good server safely.

4. Blindly modify the rear wing of the car.

Risk Index Value:

Not all cars are suitable for car rear wings. The function of the rear wing is to increase the working pressure and the stability and reliability of the body under the condition of the car, but this needs to be carefully calibrated to achieve the desired practical effect. If the rear wing of the car is blindly modified, it will have a reaction force when the car is moving, which will affect the safety of travel.

Although more and more people now like to carry out fancy modifications of vehicles, but I must follow the standard of the integrity of the safety of the bureau, and carry out modification without affecting the reliability of the car, the modification is best not carried out without authorization, and must go to a professional after-sales maintenance shop to carry out modification, only then can we ensure the safety factor of the vehicle, so that we will not have other accidents in the case of driving.

Millions of car purchase subsidies.

Now some car owners add large surrounds not only to take into account aerodynamic factors, but also to play an aesthetic effect. The defect of the large surround modification face is the road condition problem, because after the installation of the large surrounding, the height of the whole vehicle.

The degree will be reduced, and the domestic road conditions are not very ideal, and some potholes are easier to rub the big encirclement.

The rear wing is also a more used item in modification, but generally speaking, it is not recommended to install a rear wing for cars with a small displacement. It is counterproductive for some car owners to blindly install the rear wing, because the tail wing is high and is used to increase the stability of the body, which is very important for large-displacement cars, but the exaggerated rear wing of the small-displacement car will affect the speed.

Most of the wheels and brake rims are made of aluminum alloy, which is beautiful but lacks weight reduction, which is a burden for high-performance models. The modification of the brakes is mainly based on the model to choose, and some basic modifications of the vehicle are not recommended to be modified with too strong braking.

Car modifications usually have some impact on the vehicle, but the specific impact depends on the project and how the modification is made. Replacing the Elantra with 17-inch wheels will have the following effects on the vehicle:

1.Suspension: Larger wheels may result in a reduced ground clearance, which can increase the load on the suspension system, which in turn affects ride comfort and suspension durability.

2.Braking system: Larger wheels may require a larger braking system to maintain and ruin good braking performance. If you only replace the wheel hub without upgrading the brake system, it may lead to a decrease in braking performance or even brake failure.

3.Tire selection: Larger wheels require wider tires, which can affect the vehicle's driving performance, handling, and fuel economy. In addition, wider tires can have an impact on tire wear and vehicle stability when cornering.

4.Speedometer Reading Accuracy: Changing the wheel hub size may affect your vehicle's speedometer reading, resulting in a discrepancy between the displayed speed and the actual speed.

As a result, modifying the wheels may have some impact on vehicle performance and the driving experience. Before undertaking any modifications, it is advisable to consult with a professional car tuning shop or consult with the vehicle manufacturer for specific advice and understanding the potential impacts.