The surface of the floor tile is scratched by aluminum alloy, how to remove the underworld, please h

Floor tile black scratch removal 1Special cleaning agent for polished tile scratches - floor tile deep cleaning king, performance characteristics: new floor tile internal stain deep cleaning, ultra-concentrated formula, through fifteen unique art exquisite, this product combines the advantages of a variety of polishing tile cleaning agents, and immediately reacts with stains after combining with water, quickly and thoroughly remove antique brick caulk, cement seepage, stubborn black stains, leather shoe prints, metal black scratches, pencil marks, rubber hammer marks, square grid stains, arc or strip stains and other stains have excellent results, Fearless compared with similar products at home and abroad, simple and easy to use, unique effect, no loss of luster, super decontamination, clean and thorough.

2.If it is a scratch caused by heavy metal push and pull, it will be difficult to remove the scratches on the floor tiles, in order to be able to remove the metal scratches on the floor more labor-saving and faster, it is strongly recommended: first soak the king with a strong cleaning king for 3 minutes and then scrub it with the king of deep cleaning, the strong cleaning king of the floor tiles will become loose after the reaction and decomposition of the metal scratches, wipe with a wet towel dipped in the deep cleaning king a little harder, and the clean brick surface will be displayed immediately, which will not have an impact on the surface of the polished bricks, and the luster will not change in any way.

3.How to repair the scratches of polished bricks and come to mind, there are two kinds of scratches on polished bricks, one kind of polished brick scratches are on the surface of polished bricks, the surface structure of polished bricks is not damaged, and there are no traces on the surface of the floor after cleaning, and the other kind of polished brick scratches, such as using iron nails or sharp iron tools to scratch the brick surface, forming scratches that damage the brick surface, after the scratches of this floor tiles are removed, they must be repaired, otherwise they will soon be dirty and form a black scratch mark again. Use the floor tile repair agent to repair the scratches of the polished bricks, use a brush dipped in the repair agent to draw at the scratch gaps, paint again after 30 minutes, and repeat again after drying, until the scratches are reflective from the side, so that the scratches of the floor tiles can be kept clean for a long time after treatment; In addition, scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as matte, wider scratches.

Summary. 1. The repair of floor tile scratches is repaired with floor tile repair agent, and the scratches are traced with a brush dipped in the repair agent, and then painted again after 30 minutes, and repeated again after drying, until the scratches are reflective from the side, so that the scratches of the floor tiles can be kept clean for a long time after treatment; In addition, scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as matte, wider scratches.

First, the repair of floor tile scratches using floor tile repair agent to repair the first and first marks of the tile, with a brush dipped in the repair agent in the scratch gap, 30 minutes later, and then repeated, until the scratch from the side is reflective, so that the floor tile scratch can be kept clean and clean for a long time; In addition, the scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as dull, more wide scratches.

Second, the treatment of metal scratches on the floor tiles during the decoration of the floor tiles to push and pull the iron frame or aluminum alloy, what to do if the floor tiles have scratches, the focus point of the metal push and pull is small, the pressure is large, the metal traces can penetrate into the inside of the brick surface, it is difficult to clean, it is easy to damage the surface with acid, if it is a scratch caused by the heavy metal push and pull, it will be more difficult to remove the scratches on the floor tiles, in order to be able to quickly remove the metal scratches on the floor with more effortless and more touch, you can soak it with detergent for 3 minutes and then scrub it. The floor tile cleaner will become loose after decomposing with the metal scratches, wipe it with a wet towel dipped in the detergent and wipe it a little harder, and the clean brick surface will be displayed immediately, which will not affect the surface of the floor tiles, and the luster will not change in any smile.

Materials to prepare: toothpaste, toothbrush, wet towel.

Step 1: Squeeze the toothpaste onto the black metal marks on the floor tiles (the toothpaste contains surfactants that soften the metal scratches).

Step 2: Use a toothbrush to carefully scrub the scratches from the floor tiles.

Step 3: Wipe the floor tiles clean with a damp towel.

Step 4: The black marks on the floor tiles have been removed.

Think of it as a pattern, you can scrape some beautiful patterns yourself.

The glaze of the floor tiles is scratched, and there is no particularly good way to replace it.

Here are a few things you can try:

1) Wipe with a damp rag to wipe the dirt powder, and then wipe it with a clean rag (2) Apply some toothpaste, brush it gently with a brush, and then wipe off the dirt powder and toothpaste with a clean rag, all of which are white, and they all contain very fine powder, which has a friction effect, and can enter the capillary pores of the floor tiles after wiping, making the floor tiles look very white.

If the stain is very serious, you can also wipe it with a steel wool ball to remove the large stain, and then use the above methods. But it depends on the quality of your floor tiles, if ***, then there is no problem, if the floor tiles only have a thin layer of magnetic surface, the inside is ceramic, and the steel wool ball will damage the magnetic surface, then it is troublesome, or do not use steel wool balls as well.

Just ask someone from a decorator to get it for you.

You can let the decorator fix it...

How to remove the black mark of the metal scratch on the floor tile:

Preparation: toothpaste, laundry detergent, water, brush, rag.

Step 1: Squeeze toothpaste on the floor tiles (toothpaste prevents oxidation of metal scratches).

Step 2: Then pour laundry detergent onto the floor tiles (the laundry detergent contains non-ionic surfactants such as sodium alkyl sulfonate and sodium stearate, which can prevent oxidation of metal scratches, and the laundry detergent has a detergent effect).

Step 3: Scrub the floor tiles with a brush.

Step 4: Rinse the floor tiles with clean water.

Step 5: Next, wipe the floor tiles clean.

Step 6: The black marks on the floor tiles have been removed.