The logo of the newly bought plastic basin is stuck to the bottom of the basin, how to get rid of it

What should I do if the label on the stainless steel basin or plastic basin is difficult to remove? It only takes 5 seconds to solve quickly.

The registered trademarks, product barcodes and ** labels affixed to the goods are almost all pasted with stickers, and when these labels are removed, sticky sticky marks are often left. At this time, you can use a good quality student eraser to patiently and carefully wipe the adhesive part without leaving a trace.

Usually we go to the supermarket to buy plastic products, glass products and ceramic products such as vases, bowls, etc., on which the manufacturer's self-adhesive label (price tag) will be affixed. When we remove them, although the printing paper on the surface can be torn off, the glue on the bottom is always not clean. At this time, many friends will pick it with their hands, and they will pick it dirty or unclean, how to solve this problem simply and conveniently?

In fact, alcohol, gasoline or nail polish dilutions stored at home can easily and thoroughly remove these stickers. There is another thing that can also achieve a certain effect, and that is hand cream.

Method: Tear off a layer of paper on the surface of the label, apply alcohol or gasoline, etc., and then rub the surface with your hands to fully soak the self-adhesive, and finally wipe it off with a cloth.

Principle: The glue generally used for labeling is a polymer compound in the field of chemistry. Alcohol, gasoline or nail polish diluents are solvents that dissolve polymer compounds.

Nail polish diluents have a stronger dissolving power than alcohol and gasoline. Currently, many hand creams on the market contain glycerin, silicones, and natural actives. Glycerin and silicone play a moisturizing and moisturizing effect on **, and they all have a dissolving effect on self-adhesive.

So, with clever use of these items, you won't have to worry about these labels getting pretty things dirty.

Note: There are many varieties of self-adhesive on the market, the chemical composition is different, and the viscosity performance is also different, therefore, hand cream is not a panacea. At the same time, not all hand creams contain glycerin, silicones, and natural actives.

Our ideas are limited to hand cream if you don't have alcohol, petrol or nail polish thinner.

Heat it up with a hair dryer.

The method of removing the label glue on the plastic basin is as follows:

Method 1: 1. Prepare materials: paper towels, white vinegar, and small water cups. Start by placing the paper towel on the plastic basin where the label is attached.

2. Pour a few drops of white vinegar into the cup, just an appropriate amount.

3. Then pour the white vinegar onto a paper towel placed on the label.

4. Leave the paper towel with vinegar on the label for 10 minutes.

5. When the time is up, take the paper towel away and gently tear the label with your fingers.

6. In this way, the label on the plastic basin can be removed cleanly.

Method 2: 1. Pour some wind oil essence on the plastic basin first.

2. Use a wet cotton cloth to push and rub in the same direction with a little force.

3. After pushing the glue in one direction, don't rush to get it down.

4. Let the cementation be together, and take it down directly, and the cotton cloth will not be stained with glue.

5. In this way, the label on the plastic basin can be removed cleanly.

Method 3: 1. Blanch the plastic basin with hot water first.

2. Then use a metal tool to slowly scrape off the glue on the plastic basin.

Precautions: Be careful not to scratch the plastic basin, the plastic basin is more afraid of metal, so it should be scraped slowly.

The label attached to the plastic basin, the label is removed and the glue is glued to the basin, how to remove it?

Dear, hello, I'm glad to answer for you the label attached to the plastic basin, remove the label and glue on the basin, how to remove it? A1. Blow with a hair dryer for a while, the glue will melt after heating, and it can be easily removed. If there are still some traces that cannot be removed, you can apply it with wind oil essence, which will be relatively clean.

2. Wipe with a paper towel dipped in some alcohol, and rub it a few times to be clean. 3. Use acetone, the method is the same as above. The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than alcohol.

4. Use nail polish remover. The usage is the same as alcohol acetone. The effect is also very good.

Nail polish remover does not require quality, good or generally fine, as long as it can wash off the nail polish. 5. Use hand cream. Tear off the printed product on the surface first, then squeeze some hand cream on it, rub it slowly with your thumb, and rub it for a while to rub off all the sticky residues.

It's just a little slower. Hand cream is an oily substance, and its properties are incompatible with glue. This is the use of this property for glue removal.

6. Use banana water. It is an industrial agent used to remove paint, and it is easy to buy, and the method is the same as alcohol acetone. 7. It is difficult to remove the film that has been used for a long time, so you can use a hair dryer to heat and soften it to remove the film, and then use rosin perfume to wash off the remaining adhesive on the glass.

Put the paper towel on the plastic basin where the label is attached, pour the white vinegar on the paper towel, the paper towel stays on the label for 10 minutes, then remove the paper towel and gently tear the label with your fingers. Pour the wind oil essence on the plastic basin, use a damp cotton cloth to push and rub in the same direction, push the glue in one direction, and let the glue be glued together and then take it off. Blanch the plastic basin with hot water, and then use a metal tool to slowly scrape off the glue on the plastic basin.

1. Put the paper towel on the plastic basin where the label is applied, pour a few drops of white vinegar into the cup, then pour the white vinegar on the paper towel on the label, pour the vinegar paper towel on the label for 10 minutes, and then take the paper towel away and gently tear the label with your fingers.

2. Pour the wind oil essence on the plastic basin, use a wet cotton cloth to push and rub in the same direction with a little force, push the glue in one direction, and let the glue be glued together and take it off directly.

3. Blanch the plastic basin with hot water, and then use a metal tool to slowly scrape off the glue on the plastic basin.