What should I do if the purple clay cup leaks? What is the method to solve the water seepage of the

The first one, find the mud of this purple sand cup, grind it, and plug it. 3 days later.

Naturally air dry to continue making tea.

The second, with millet porridge.

or glutinous rice porridge) into a purple clay cup, wait for a day and then heat it to make the porridge that seeps into the cracks dry and solid, and will not leak again.

Third, if the porcelain cracks are large, you can mash a few snails with meat into a pulp, embed them in the porcelain cracks, and dry them in the shade to use them normally.

Fourth, get a new one.

Put millet porridge (or glutinous rice porridge) into a purple clay cup, wait for a day and then heat it to make the porridge that seeps into the cracks dry and solid, and will not leak again. If the porcelain crack is large, you can mash a few snails with meat into a pulp, embed them in the porcelain cracks, and dry them in the shade to use them normally.

The natural purple sand cup is made of purple sand, and of course its characteristics are almost the same as those of purple sand. The purple sand material has excellent air permeability, and has the advantages of making tea that is not easy to taste and tea is not easy to deteriorate, making the tea soup more mellow and delicious!

Features: 1. Good plasticity. Taking purple mud as an example, its liquid limit is, plastic limit, and index is, which is highly malleable, and can be processed into different shapes of different sizes.

Strong adhesion when making, but it does not stick to the tool and does not stick to the hands. For example, the mouth and the handle can be made separately, and then glued to the body of the pot can be carved with clay carving; The clay chips of square utensils can be bonded with grease sludge (more water can be added) and then processed. Such a large process capacity provides a material guarantee for potters to fully express their creative intentions and display their craft skills.

2. The drying shrinkage rate is small. The purple sand pottery shrinks about 8% from the clay blank molding to the firing, the firing temperature range is wide, the deformation rate is small, and the green strength is large, so the mouth cover of the teapot can be tightly sealed, and the modeling contour lines are strict and not distorted. The handle can be thicker than the porcelain pot, not afraid of the spout surface of the pot out of roundness, so that it fits with the proportion of the mouth, and can also be made into an open vessel and a large-mouth teapot with the same size as the mouth and the body of the pot.

3. The purple sand mud itself does not need to be mixed with other raw materials to become pottery alone. There are double porosity structures in the finished pottery, one is the closed pores, which are the pores inside the aggregate; One is the open stomata, which are the stomata wrapped around the aggregate. This makes the purple sand pottery have good air permeability.

The stomata are fine and the density is high, and it has a strong adsorption force, while the glazed ceramic teapot lacks this function. At the same time, the teapot itself is a precise and reasonable shape, the spout and lid are tightly fitted, and the displacement tolerance is less than , which reduces the channel for air mixed with molds such as Aspergillus flavus to flow into the pot. Therefore, the color and aroma of tea can be maintained for a long time, and the time for tea to deteriorate and become rancid is relatively delayed.

Its hot and cold rapid change performance is also good, even if it is brewed in boiling water and then rushed into cold water, it will not explode.

4. Purple sand clay does not need to be glazed after molding, it is smooth and shiny shape, the longer it is used, the longer the time of rubbing, it will glow. This is also incomparable to other textures of clay.

A simple identification method for purple sand cups:

1. The thickness of the cup body, the thinner is better.

2. The carving on the cup body is as fine as possible.

3. The tightness of the lid and the mouth of the cup, the higher the better.

4. The cup surface is round, smooth and textured.

5. Clay and sand structure, color glossy, full and moisturized.

Get a new one. What you use may be that it is pretending to be purple sand, which is generally real purple sand, which will not crack due to sudden cold and heat, which is one of the major advantages of purple sand.

Because of the high cost of purple sand raw materials, some people use general clay to add chemical raw materials to make products that look like purple sand, which is not only not beneficial to the human body, but also harmful.

Please note that the crisp sound like porcelain when struck is very likely to be fake (thinking that purple sand has good air permeability, not as high density as porcelain, and the sound is crisp and excessively low like a frying pot). Or you can also contact the seller to see if you can return it.

Water seeps from the bottom of the purple clay cup, indicating that there are cracks at the bottom of the cup and it is bad. If the crack is too large, it is generally impossible to repair, so it is recommended to contact the seller to negotiate and deal with it. If the water seeps very slowly and the crack is not visible, there is a way you can try to plug the crack by breaking up the cooked rice grains and applying it to the place where the crack may exist.

The purple clay pot is a very particular tea set, the water seepage is the sand hole in the firing process, the millet or rice can be boiled into porridge, the rice milk on the porridge is poured into the pot and heated slightly, so that the rice milk can be sealed by infiltrating the trachoma, which is non-toxic and harmless to use.

Zisha pot water seepage, this bai belongs to the quality of the product zhizhi, figure out the reason for the water seepage, is the new pot dao buy zhuan to shu water seepage, just quickly contact the seller to deal with it, the responsible seller will change with you. If you bump yourself and cause a crack in the body of the pot, you can only solve it yourself, and there are two solutions.

One is that the crack is very small and almost invisible, so you can crush the cooked rice grains and apply it to the crack (the inner wall of the pot), and apply it several times to plug the crack. The other is that the cracks are obvious, and this can only be spent on curium.

1. For pots with small cracks:

You can boil some glutinous rice porridge and pour it into the pot, then put it in the pot and steam it for ten to fifteen minutes, so that the porridge water can fully penetrate into every crack, and then take out the pot and pour out the porridge without cleaning, steam it for five minutes until the porridge water solidifies in the gaps, take it out and wash it, and finally bake it in the electric oven for five minutes.

Or put the teapot into the milk and steam for half an hour, take it out and steam it for half an hour, take it out and then smear it with cold milk, this method is more suitable for the pot that cracks without opening the pot, and the protein in the milk can seal the fine lines in the purple clay pot without showing traces.

2. The pot with relatively large cracks can be considered to be crushed and ground into powder with the old green tiles in the south of the Yangtze River, and after the teapot is soaked in tea, it is smeared with gauze dipped in fine powder, and the cracks will be sewn up soon after, so that this method can not only repair the purple clay pot, but also play the role of raising the pot.

It can also be repaired with gold-inlaid edges, copper-clad and other methods, and gold-lined edges are used to wrap cracks with ** thin sheets, which are mostly used to decorate pots, and repairing defects is also a kind of creativity, which will make the pot show a different beauty; Copper cladding is to wrap the whole body of the pot with copper sheets, and the copper sheets are generally selected with openwork patterns in the selection of copper sheets, and you can choose the patterns you like, so that the artistic sense of the whole pot will be strengthened, so that the pot has a second life presentation.

There are four main ways to repair the purple clay pot: inlay and tin wrapping, curium, sticking and cultural relics restoration. Nowadays, the most commonly used method is glue.

Methods and steps of gluing.

1.First of all, rinse the dust with clean water, and then use toothpaste and water to wash the oil and tea scale, and break the ballast. Wash by hand with a brush, knife, etc.

Some can't be cleaned with some purple sand. You can soak it in bleach powder and other solutions for about two hours. For those who have repaired the purple clay pot to be dismantled, washed and rebuilt.

The treatment method is to warm or immerse in hot water, add a little alkali, that is, it can be softened and dismantled.

2.According to the shape, ornamentation, and color of the utensils, try to assemble and arrange, write marks with a pen, and plan the order of bonding.

3.The choice of adhesive for the repair of porcelain is key. Due to the serious damage of some purple clay pots, the performance requirements of the adhesive are high, and only the adhesive with high bonding strength, strong aging resistance and moderate curing time can repair the high-quality purple clay pot.

with"Two-component AB glue"After bonding the teacup lid, the effect is good, and the bonding is good (preferably pressurized and standing) after 24 hours and it is completely cured and firmly connected, but all adhesives have odors and toxins. If it's valuable, you can make it big. Thank you.

It is better not to bond, all adhesives have odors and toxins. If it is valuable, it can be made up, in the past, some people who loved purple sand sold a new pot to break it, and then it was juggled up, copper juzi, silver juzi, gold juzi, and the number of juzi to show the identity of the person and the value of the pot. (A juggernaut is a small piece of metal that joins a crack earlier.)

It's all smashed, smashed into foam and then re-fired Welcome to adopt!

1.Repair with egg whites. Coat the cracked spot of the teapot with egg whites and stick them together, which is eco-friendly, firm and traceless.

2.Cook in milk. Put the pot with cracks in the milk and cook for about half an hour, the protein in the milk will seal the cracks.

3.Cook with glutinous rice. Glutinous rice is boiled in water over low heat for an hour, and the starch will seep into the crevices, and then it is placed on the ground to cool.

4.Grouting infusion. Then sprinkle an appropriate amount of cement evenly in the gaps, and the cement slurry can be used normally after natural drying.

5. Lime powder plugging. Stir slowly with 100g of milk and vinegar, then add half an egg white and lime powder to make a paste, which can be used to tinker. Cracks and holes in the teapot can be patched in the following ways:

1。Repair with egg whites. Apply the egg whites to the cracks in the teapot and stick them together.

Eco-friendly and strong, no traces. 2.Cook it in milk.

Put the pot with cracks in the milk for about half an hour, and the protein in the milk can seal the cracks. 3.Cook with glutinous rice.

Cook the glutinous rice over low heat for an hour. The starch will seep into the cracks and then cool on the ground. 4.

Cement slurry sealing. Mix in an appropriate amount of cement and spread it evenly in the crevices until the cement slurry dries naturally. 5.

Lime powder clogged. Stir slowly with 100 grams of milk and vinegar, then add half of the egg whites, then add lime powder and make a paste for repair.

The cracks and leaks of the purple clay pot can be repaired in the following ways:

1. Repair with egg whites. Apply the egg whites to the cracks in the purple clay pot and then stick them together, so that it is environmentally friendly, firm, and has no traces.

2. Put it in milk and boil. Put the pot with cracks in the milk and boil it for about half an hour, and the protein in the milk will seal the cracks.

3. Boil in glutinous rice water. Boil glutinous rice with water over low heat for an hour, the starch will seep into the cracks, and then put it on the ground to cool.

4. Cement slurry potting. Mix an appropriate amount of cement and then evenly spread it in the gaps, and wait until the cement slurry is naturally air-dried before it can be used normally.

5. Lime powder plugging. He Fang used 100 grams of destroyed milk and vinegar to stir slowly, then put half an egg white, and then add lime powder to make a paste that can be used to repair.

Summary. Hello, if it is a particularly small fine line, you can beat an egg, take the egg white to smear the cracks, the bond is firm and environmentally friendly, and does not affect the use at all.

Hello, if it is a particularly small fine line, you can beat an egg, take the egg white to smear the cracks, the bond is firm and environmentally friendly, and does not affect the use at all.

Is the gap big. It's a bit big.

Fill the purple clay pot with thick rice porridge and cook it on the stove for about an hour to allow the starch to penetrate into the cracks. Do not wash it immediately after removing from the pot, put it on a wooden or iron tripod and let it cool naturally before rinsing.

I haven't boiled the pot yet.

Hold on. If it is a purple clay pot that breaks without opening the pot, you can put it in milk and boil it for half an hour, and then apply it with cold milk after taking it out. The protein in the milk can seal the fine lines in the purple clay pot without showing traces.

You give it a try. You can't put it on the fire and boil it in a glutinous rice porridge kettle, how to cook it.

You can use milk.

Add to milk and cook for 30 to 40 minutes.

Hope it helps.

Isn't there anything else to get rid of?

These are the easiest and most effective methods.